Ammonia electro-oxidation (AEO) is a zero carbon-emitting sustainable means for the generation of hydrogen fuel, but its commercialization is deterred due to sluggish reaction kinetics and the poisoning of expensive metal electrocatalysts. With this perspective, CuO impregnated γ-Al2O3 (CuO/γ-Al2O3) hybrid materials were synthesized as effective and affordable electrocatalysts and investigated for AEO in alkaline media. Structural investigations were performed via different characterization techniques, i.e., X-ray diffraction (XRD), Fourier transformed infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and electrochemical impedance spectroscopy (EIS). The morphology of γ-Al2O3 support as interconnected porous structures rendered the CuO/γ-Al2O3 nanocatalysts with robust activity. The additional CuO impregnation resulted in the enhanced electrochemical active surface area (ECSAs) and diffusion coefficient and spiked the electrocatalytic performance for NH3 electrolysis. Owing to good values of diffusion coefficient for AEO, low bandgap, and availability of ample ECSA at higher CuO to γ-Al2O3 ratio, these proposed electrocatalysts were proved to be effective in AEO. Due to good reproducibility, electrochemical stability, and higher activity for ammonia electro-oxidation, CuO/γ-Al2O3 nanomaterials are proposed as efficient promoters, electrode materials, or catalysts in ammonia electrocatalysis.
Lithium-ion batteries (LIBs) have been explored to meet the current energy demands; however, the development of satisfactory anode materials is a bottleneck for the enhancement of the electrochemical performance of LIBs. Molybdenum trioxide (MoO3) is a promising anode material for lithium-ion batteries due to its high theoretical capacity of 1117 mAhg−1 along with low toxicity and cost; however, it suffers from low conductivity and volume expansion, which limits its implementation as the anode. These problems can be overcome by adopting several strategies such as carbon nanomaterial incorporation and polyaniline (PANI) coating. Co-precipitation method was used to synthesize α-MoO3, and multi-walled CNTs (MWCNTs) were introduced into the active material. Moreover, these materials were uniformly coated with PANI using in situ chemical polymerization. The electrochemical performance was evaluated by galvanostatic charge/discharge, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). XRD analysis revealed the presence of orthorhombic crystal phase in all the synthesized samples. MWCNTs enhanced the conductivity of the active material, reduced volume changes and increased contact area. MoO3-(CNT)12% exhibited high discharge capacities of 1382 mAhg−1 and 961 mAhg−1 at current densities of 50 mAg−1 and 100 mAg−1, respectively. Moreover, PANI coating enhanced cyclic stability, prevented side reactions and increased electronic/ionic transport. The good capacities due to MWCNTS and the good cyclic stability due to PANI make these materials appropriate for application as the anode in LIBs.
1 July 2022 in Journal of the Electrochemical Society
RuO 2 and PdO promoted CuO/Al 2 O 3 mixed metal oxide nanostructures synthesized via co-impregnation technique demonstrated a robust electrocatalytic activity towards ammonia electro-oxidation (AEO). Physio-chemically characterized RuO 2 -CuO/Al 2 O 3 and PdO-CuO/Al 2 O 3 catalyst powders exhibited high electrochemical active surface area (ECSA), highest being shown by 1% RuO 2 -CuO/Al 2 O 3 . All fabricated electrodes displayed pleasing electroactive response towards AEO but ternary metal oxides showed superior and promoted catalytic output owing to their larger ECSA, higher current densities ( j ), larger diffusion coefficients (D°), greater apparent rate constants (k app ), and lower charge transfer resistance (R ct ) values. Lower values of R ct obtained from EIS indicated the facilitation of electro-oxidation process over modified electrodes. The finest catalysis performance is expressed by 1% RuO 2 -CuO/Al 2 O 3 producing the maximum oxidation current. All the promoted CuO/Al 2 O 3 mixed metal oxide exhibited excellent stability and reproducibility in analyte solution. Consequently, γ -Al 2 O 3 supported metal oxide electrocatalysts can be of great socio-economic significance by enhancing the energy production kinetics thereby achieving a higher energy output.