Semiconducting metal oxide-based nanowires (SMO-NWs) for gas sensors have been extensively studied for their extraordinary surface-to-volume ratio, high chemical and thermal stabilities, high sensitivity, and unique electronic, photonic and mechanical properties. In addition to improving the sensor response, vast developments have recently focused on the fundamental sensing mechanism, low power consumption, as well as novel applications. Herein, this review provides a state-of-art overview of electrically transduced gas sensors based on SMO-NWs. We first discuss the advanced synthesis and assembly techniques for high-quality SMO-NWs, the detailed sensor architectures, as well as the important gas-sensing performance. Relationships between the NWs structure and gas sensing performance are established by understanding general sensitization models related to size and shape, crystal defect, doped and loaded additive, and contact parameters. Moreover, major strategies for low-power gas sensors are proposed, including integrating NWs into microhotplates, self-heating operation, and designing room-temperature gas sensors. Emerging application areas of SMO-NWs-based gas sensors in disease diagnosis, environmental engineering, safety and security, flexible and wearable technology have also been studied. In the end, some insights into new challenges and future prospects for commercialization are highlighted.

Nowadays, it is still technologically challenging to prepare highly sensitive sensing films using microelectrical mechanical system (MEMS) compatible methods for miniaturized sensors with low power consumption and high yield. Here, sensitive cross-linked SnO₂:NiO networks were successfully fabricated by sputtering SnO₂:NiO target onto the etched self-assembled triangle polystyrene (PS) microsphere arrays and then ultrasonically removing the PS microsphere templates in acetone. The optimum line width (~ 600 nm) and film thickness (~ 50 nm) of SnO₂:NiO networks were obtained by varying the plasma etching time and the sputtering time. Then, thermal annealing at 500 °C in H₂ was implemented to activate and reorganize the as-deposited amorphous SnO₂:NiO thin films. Compared with continuous SnO₂:NiO thin film counterparts, these cross-linked films show the highest response of ~ 9 to 50 ppm ethanol, low detection limits (< 5 ppm) at 300 °C, and also high selectivity against NO₂, SO₂, NH₃, C₇H₈, and acetone. The gas-sensing enhancement could be mainly attributed to the creating of more active adsorption sites by increased stepped surface in cross-linked SnO₂:NiO network. Furthermore, this method is MEMS compatible and of generality to effectively fabricate other cross-linked sensing films, showing the promising potency in the production of low energy consumption and wafer-scale MEMS gas sensors.

Low-dimensional semiconductors have been considered excellent materials to construct photodetectors for infrared detection with an easy process and excellent compatibility but suffer from low detectivity mainly owing to the poor light absorption of the ultra-thin body. Here, we demonstrate a thin film transistor (TFT) based short-wave infrared photodetector consisting of a carbon nanotube (CNT) TFT gated by a PbS colloidal quantum dots (CQDs) based heterojunction. The thick PbS CQDs' film efficiently absorbs infrared light and then excites and separates electron–hole pairs to generate a photovoltage at the pn heterojunction of the PbS CQDs/ZnO film. The photovoltage is further amplified and transduced in situ by the CNT TFT under the heterojunction, and then the detector featured a specific detectivity of 5.6 × 10¹³ Jones under 1300 nm illumination and a fast response of the sub-ms level (0.57 ms). The CQDs based heterojunction gating TFT represents a universal architecture for highly sensitive low-dimensional semiconductor based infrared photodetectors, competitive with state-of-the-art epitaxial semiconductors and enabling monolithic integration technology.