Additive manufacturing (AM) enables the production of complex structured parts with tailored properties. Instead of manufacturing parts as fully solid, they can be infilled with lattice structures to optimize mechanical, thermal, and other functional properties. A lattice structure is formed by the repetition of a particular unit cell based on a defined pattern. The unit cell’s geometry, relative density, and size dictate the lattice structure’s properties. Where certain domains of the part require denser infill compared to other domains, the functionally graded lattice structure allows for further part optimization. This manuscript consists of two main sections. In the first section, we discussed the dual graded lattice structure (DGLS) generation framework. This framework can grade both the size and the relative density or porosity of standard and custom unit cells simultaneously as a function of the structure spatial coordinates. Popular benchmark parts from different fields were used to test the framework’s efficiency against different unit cell types and grading equations. In the second part, we investigated the effect of lattice structure dual grading on mechanical properties. It was found that combining both relative density and size grading fine-tunes the compressive strength, modulus of elasticity, absorbed energy, and fracture behavior of the lattice structure.

Stereolithography additive manufacturing (SLA-AM) can be used to produce ceramic structures by selectively curing a photosensitive resin that has ceramic powder in it. The photosensitive resin acts as a ceramic powder binder, which is burned, and the remaining ceramic part is sintered during post-processing using a temperature–time-controlled furnace. Due to this process, the ceramic part shrinks and becomes porous. Moreover, additive manufacturing leads to the orthotropic behavior of the manufactured parts. This article studies the effect of the manufacturing orientation of ceramic parts produced via SLA-AM on dimensional accuracy. Scaled CAD models were created by including the calculated shrinkage factor. The dimensions of the final sintered specimens were very close to the desired dimensions. As sintering induces porosity and reduces the mechanical strength, in this study, the effect of orientation on strength was investigated, and it was concluded that the on-edge specimen possessed by far the highest strength in terms of both compression and tension.

Projection microstereolithography additive manufacturing (PµSLA-AM) systems utilize free radical photopolymerization to selectively transform liquid resins into accurate and complex, shaped, solid parts upon UV light exposure. The material properties are coupled with geometrical accuracy, implying that optimizing one response will affect the other. Material properties can be enhanced by the post-curing process, while geometry is controlled during manufacturing. This paper uses designed experiments and analytical curing models concurrently to investigate the effects of process parameters on the green material properties (after manufacturing and before applying post curing), and the geometrical accuracy of the manufactured parts. It also presents a novel accumulated energy model that considers the light absorbance of the liquid resin and solid polymer. An essential definition, named the irradiance affected zone (IAZ), is introduced to estimate the accumulated energy for each layer and to assess the feasibility of the geometries. Innovative methodologies are used to minimize the effect of irradiance irregularities on the responses and to characterize the light absorbance of liquid and cured resin. Analogous to the working curve, an empirical model is proposed to define the critical energies required to start developing the different material properties. The results of this study can be used to develop an appropriate curing scheme, to approximate an initial solution and to define constraints for projection microstereolithography geometry optimization algorithms.

3D printing manufacturing technology has been utilized in various applications due to its promising manufacturing advantages. Desktop Digital Light Processing (DLP) printers provide high-resolution products with a moderate price range. DLP uses an array of micromirrors to transmit UV light from the light projector in order to perform selective curing of a prepolymer resin and turn it in to the required geometry. The CAD file is transformed into several slices according to the layer thickness. Each slice is then converted to an image of black and white pixels, in which each white pixel actuates a corresponding micromirror to transmit the UV light to cure a corresponding voxel, while a black pixel corresponds to no actuation, which means no curing for the corresponding voxel. The micromirror’s size determines the resolution of the printer. Although a theoretical voxel size can be determined as a function of the micromirror’s dimensions and layer thickness, the actual voxel volume depends on several parameters such as the layer thickness, UV exposure time, and UV exposure intensity. Controlling these three parameters would result in more accurate 3D printed parts and more control over the dimensional tolerance. In this paper, the effect of variable light intensity in terms of grayscale pixels is studied along with the exposure time and layer thickness to manipulate the voxel horizontal dimensions. This enables printing with voxel dimensions below the size of the micromirrors in the DLP, which improve the geometric dimensioning and tolerance of the printed parts.