Martijn Sebastiaan Duraij

Mr. Martijn Sebastiaan Duraij

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 February 2022 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
YXYudi Xiao
Yudi Xiao
ZZZhe Zhang
Zhe Zhang
MDMartijn Sebastiaan Duraij
Martijn Sebastiaan Duraij
TZTiberiu-Gabriel Zsurzsan
Tiberiu-Gabriel Zsurzsan
Michael A.E. AndersenMichael A.E. Andersen
Michael A.E. Andersen
Power electronics converters operating at elevated temperature usually have degraded performance, such as reduced efficiency, lower noise immunity, and decreased system reliability, compared to those operating at room temperature. Nevertheless, harsh-environment applications, such as deep earth drilling, automotive, avionics, and space exploration, have been utilizing converters in high-temperature environments and are continuously pushing the temperature limits higher and higher with the advances in device technologies and converter design methodologies. This article starts with a literature study to identify the temperature dependence and the temperature limits of individual components. Then, published works about high-temperature converters are examined. Their selection of components is compared. Experimental results are analyzed to reflect on the efficacy of different component selections. Finally, since the latest published high-temperature converter was developed more than five years ago, a 1-kV input, 520-V output, 1-kW, $150$ °C-ambient-temperature-rated dc–dc converter is designed with state-of-the-art devices. Based on the literature review, and the test of the $150$ °C prototype, the main challenges of designing high-temperature power electronics converters are identified and concluded to be time-consuming, difficult, and expensive characterization of components, lack of accurate and computationally efficient models of converters, and optimizing component selection within short development time.

14 February 2020 in Energies
Verified
Journal Article
Open access
PDF file
SRSimon Ravyts
Simon Ravyts
WSWieland Van De Sande
Wieland Van De Sande
MVMauricio Dalla Vecchia
Mauricio Dalla Vecchia
GBGiel Van Den Broeck
Giel Van Den Broeck
MDMartijn Sebastiaan Duraij
Martijn Sebastiaan Duraij
JDJohan Driesen
Johan Driesen
State-of-the-art reliability assessment typically starts from a given circuit topology, for which the most suitable components are selected using a Physics of Failure analysis. This paper, however, addresses the topology selection stage, which is the foundation in designing reliable converters. Based on an overview of the reliability performance of different components, a methodology is presented as a guideline for comparing topologies to one another. The focus is directed at practical consequences associated with certain designs. Furthermore, an overview is provided on the latest developments in component technology reliability improvements. The developed methodology is mainly intended for demanding applications, where long lifetimes are required or elevated ambient temperatures are present. After the topology selection, an overview of possibilities is given that allows further increasing converter availability. Finally, the methodology is applied to the design of module level converters for building integrated photovoltaics, which is a high temperature application with a high desired lifetime. A prototype and experimental results are presented.

20 September 2022 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
YXYudi Xiao
Yudi Xiao
MDMartijn Sebastiaan Duraij
Martijn Sebastiaan Duraij
ZZZhe Zhang
Zhe Zhang
TZTiberiu-Gabriel Zsurzsan
Tiberiu-Gabriel Zsurzsan
Michael A.E. AndersenMichael A.E. Andersen
Michael A.E. Andersen
The Three-level Neutral-point-clamped (TLNPC) dc-dc converter is a popular topology for applications with high input voltage due to its simplicity of modulation, capability of withstanding high input voltage, and Zero-voltage-switching (ZVS) operation. Regarding mitigating the voltage ringing on secondary side, energy recovery approach is preferred to RCD approach for the sake of high efficiency and small component counts. This paper demonstrates that, using recovery approach in a Silicon Carbide (SiC) based TLNPC dc-dc converter causes hard-switching of the outer switches due to the quasi-linear output capacitance Coss of SiC MOSFETs. The ZVS design of a full-SiC TLNPC converter must not follow conventional methods for Silicon (Si) based converters. To address this issue, a modified design approach, which can guarantee ZVS of all switches in a full-SiC TLNPC dc-dc converter, is introduced and discussed. All of the analysis is verified on a 3 kW full-SiC TLNPC prototype, which has rated input voltage of 1.2 kV, output voltage of 600 V, and achieves ZVS in the output power range of 1.2 kW $\sim$ 3 kW.

1 February 2020
Verified
Conference Paper
Closed access
MDMartijn Sebastiaan Duraij
Martijn Sebastiaan Duraij
YXYudi Xiao
Yudi Xiao
GZGabriel Zsurzsan
Gabriel Zsurzsan
ZZZhe Zhang
Zhe Zhang
MHMads Hansen
Mads Hansen
BTBrian Thomsen
Brian Thomsen
Electrical lines, also known as wirelines, are commonly used for well intervention techniques to increase flow of oil and gas wells that can be executed during a low service time. Previous studies show the importance of this electrical conductor for power delivery as well as communication purposes. Nevertheless, a validated model and its parameters of this channel are still missing. This papers outlines a geometrical approach to estimate the electrical dynamic behavior for wireline types used in the field with results supported by four different types of validation. The proposed method proves to capture the wireline dynamic behavior characteristics and is particular accurate in modeling the capacitive element within 5 %.