The increasing penetration of renewable energy sources (RES) poses a major challenge to the operation of the electricity grid owing to the intermittent nature of their power output. The ability of utility-scale battery energy storage systems (BESS) to provide grid support and smooth the output of RES in combination with their decrease in cost has fueled research interest in this technology over the last couple of years. Power electronics (PE) is the key enabling technology for connecting utility-scale BESS to the medium-voltage grid. PE ensure energy is delivered while complying with grid codes and dispatch orders. Simultaneously, the PE must regulate the operating point of the batteries, thus for instance preventing overcharge of batteries. This paper presents a comprehensive review of PE topologies for utility BESS that have been proposed either within industry or the academic literature. Moreover, a comparison of the presently most commercially viable topologies is conducted in terms of estimated power conversion efficiency and relative cost.

High penetration of renewable energy resources in the power system results in various new challenges for power system operators. One of the promising solutions to sustain the quality and reliability of the power system is the integration of energy storage systems (ESSs). This article investigates the current and emerging trends and technologies for grid-connected ESSs. Different technologies of ESSs categorized as mechanical, electrical, electrochemical, chemical, and thermal are briefly explained. Especially, a detailed review of battery ESSs (BESSs) is provided as they are attracting much attention owing, in part, to the ongoing electrification of transportation. Then, the services that grid-connected ESSs provide to the grid are discussed. Grid connection of the BESSs requires power electronic converters. Therefore, a survey of popular power converter topologies, including transformer-based, transformerless with distributed or common dc-link, and hybrid systems, along with some discussions for implementing advanced grid support functionalities in the BESS control, is presented. Furthermore, the requirements of new standards and grid codes for grid-connected BESSs are reviewed for several countries around the globe. Finally, emerging technologies, including flexible power control of photovoltaic systems, hydrogen, and second-life batteries from electric vehicles, are discussed in this article.

The power system is experiencing an ever-increasing integration of photovoltaic power plants (PVPPs), which leads demand on the power system operators to force new requirements to sustain with quality and reliability of the grid. Subsequently, a significant quantity of flexible power point tracking (FPPT) algorithms have been proposed in the literature to enhance functionalities PVPPs. The intention of FPPT algorithms is to regulate the PV power to a specific value imposed by the grid codes and operational conditions. This will inevitably interfere the maximum power point tracking (MPPT) operation of PV systems. Nevertheless, the FPPT control makes PVPPs much more grid-friendly. The main contribution of this paper is to comprehensively compare available FPPT algorithms in the literature from different aspects and provide a benchmark for researchers and engineers to select suitable FPPT algorithms for specific applications. A classification and short description of them are provided. The dynamic performances of the investigated algorithms are compared with experimental tests on a scaled-down prototype. Directions for future studies in this area are also presented.

Medium-voltage (MV) multilevel converters are considered a promising solution for large scale photovoltaic (PV) systems to meet the rapid energy demand. This paper focuses on reviewing the different structures and the technical challenges of modular multilevel topologies and their submodule circuit design for PV applications. The unique structure of the converter’s submodule provides modularity, independent control of maximum power point tracking (MPPT), galvanic isolation, etc. Different submodule circuits and MPPT methods to efficiently extract the PV power are reviewed. The integration of the multilevel converters to PV systems suffers unbalanced power generation during partial PV shading conditions. Several balancing strategies to solve this problem are presented and compared to give a better understanding of the balancing ranges and capabilities of each strategy. In addition, the paper discusses recent research advancements, and possible future directions of MV converters-based large-scale PV systems for grid integration.

This paper further develops a model predictive control (MPC) scheme which is able to exploit the large number of redundant switching states available in a multilevel H-bridge StatCom (H-StatCom). The new sections of the scheme provide optimized methods to tradeoff the harmonic performance with converter switching losses and capacitor voltage ripple. Varying the pulse placement within the modulation scheme and modifying the heuristic model of the voltage balancing characteristics allows the MPC scheme to achieve superior performance to that of the industry standard phase shifted carrier modulation technique. The effects of capacitor voltage ripple on the lifetime of the capacitors are also investigated. It is shown that the MPC scheme can reduce capacitor voltage ripple and increase capacitor lifetime. Simulation and experimental results are presented that confirm the correct operation of the control and modulation strategies.

This paper introduces a cascaded H-bridge multilevel converter (CHB-MC)-based StatCom system that is able to operate with extremely low dc capacitance values. The theoretical limit is calculated for the maximum capacitor voltage ripple, and hence minimum dc capacitance values that can be used in the converter. The proposed low-capacitance StatCom (LC-StatCom) is able to operate with large capacitor voltage ripples, which are very close to the calculated theoretical maximum voltage ripple. The maximum voltage stress on the semiconductors in the LC -StatCom is lower than in a conventional StatCom system. The variable cluster voltage magnitude in the LC-StatCom system drops well below the maximum grid voltage, which allows a fixed maximum voltage on the individual capacitors. It is demonstrated that the proposed LC-StatCom has an asymmetric V-I characteristic, which is especially suited for operation as a reactive power source within the capacitive region. A high-bandwidth control system is designed for the proposed StatCom to provide control of the capacitor voltages during highly dynamic transient events. The proposed LC-StatCom system is experimentally verified on a low-voltage seven-level CHB-MC prototype. The experimental results show successful operation of the system with ripples as high as 90% of the nominal dc voltage. The required energy storage for the LC-StatCom system shows significant reduction compared to a conventional StatCom design.