We investigated SiC-based hydrogen gas sensors with metal-insulator-semiconductor (MIS) structure for high temperature process monitoring and leak detection applications in fields such as the automotive, chemical and petroleum industries. In this work, a thin tantalum oxide (Ta2O5) layer was exploited with the purpose of sensitivity improvement, because tantalum oxide has good stability at high temperature with high permeability for hydrogen gas. Silicon carbide (SiC) was used as a substrate for high-temperature applications. We fabricated Pd/Ta2O5/SiC-based hydrogen gas sensors, and the dependence of their I-V characteristics and capacitance response properties on hydrogen concentrations were analyzed in the temperature range from room temperature to 500 °C. According to the results, our sensor shows promising performance for hydrogen gas detection at high temperatures.
Pd/Ta2O5/SiC Schottky-diode hydrogen sensors were fabricated, and their hydrogen gas sensing performance was investigated at 573 K and 773 K. Interfacial Ta2O5 films of 120 nm in thickness were formed by using rapid thermal oxidation (RTO) of the sputtered Ta films on SiC. The crystallinity of the Ta and the Ta2O5 films were characterized by using X-ray diffraction (XRD). As-sputtered Ta films on 4H-SiC are composed of α-Ta (body-centered-cubic) and β-Ta (tetragonal), and α-Ta (110) is the dominant orientation. After RTO at 573 K, the Ta films are converted to β-Ta2O5 (orthorhombic). The diode sensors show high sensitivity to H2 even at the low H2 concentration of 500 ppm, and the voltage change of the sensor upon H2 exposure is proportional to the H2 concentration in the range of 500 ∼ 2000 ppm at 573 K. The response voltage ΔV is shown to arise mostly from the change in the series resistance component of the sensor upon H2 exposure; the main origin of that change is believed to be the Ta2O5 interfacial layer. The response time t90 of the sensor at 573 K was estimated to be approximately 8 s.
In this study, nano-scale honeycomb-shaped structures with anti-reflection properties were successfully formed on SiC. The surface of 4H-SiC wafer after a conventional photolithography process was etched by inductively coupled plasma. We demonstrate that the reflection characteristic of the fabricated photodiodes has significantly reduced by 55% compared with the reference devices. As a result, the optical response Iillumination/Idark of the 4H-SiC photodiodes were enhanced up to 178%, which can be ascribed primarily to the improved light trapping in the proposed nano-scale texturing.