The paper presents an analysis of energy consumption in a Plug-in Hybrid Electric Vehicle (PHEV) used in actual road conditions. Therefore, the paper features a comparison of the consumption of energy obtained from fuel and from energy taken from the vehicle’s batteries for each travel with a total distance of 5000 km. The instantaneous energy consumption per travelling kilometre in actual operating conditions for a combustion engine mode are within the range of 233 to 1170 Wh/km and for an electric motor mode are within the range of 135 to 420 Wh/km. The average values amount to 894 Wh/km for the combustion engine and 208 Wh/km for the electric motor. The experimental data was used to develop curves for the total energy consumption per 100km of road section travelled divided into particular engine types (combustion/electric), demonstrating a close correlation to actual operating conditions. These values were referred to the tested passenger vehicle’s approval data in a WLTP test, with the average values of 303 Wh/km and CO2 emission of 23 g/km.

In this work, the authors focused on analyzing the energy efficiency and dynamics during car acceleration, featuring investigation of acceleration dynamics under various acceleration intensities. The tests were performed in the speed range between 45 km/h and 120 km/h, at a constant gear ratio. This enabled obtaining variable dynamic parameters of the acceleration process, ranging from about 0.1 to 1.4 m/s2 , and recording variation in fuel consumption from 6.28 to 27.03 dm3 /100km. The study focused on determining the relation between fuel consumption, energy efficiency and vehicle acceleration depending on the available drivetrain power. The relation between fuel consumption and vehicle acceleration was described by using the dynamic index. The proposed dynamic index takes into account the energy (from burned fuel) and vehicle acceleration intensity to obtain an objective metric for characterizing the acceleration process. The aforementioned index takes the form of the passenger car movement energy quality index and can be related to widely known physical properties, thus ensuring its universality. The index expresses the energy expenditure within the time needed to accelerate a vehicle weighing 1kg by a 1m distance. As opposed to other criteria that are applied to the assessment of passenger cars dynamics, the index shows a high determination coefficient R2 in excess of 0.99, and can be used as a universal metric to test other vehicle types.

This paper presents an analysis of the mileage energy consumption for an electric passenger vehicle in terms of the introduction of numerous speed limits. Regulations concerning the limiting of vehicle speed to 30 km/h in cities or residential areas are particularly common. This restriction is intended to increase traffic safety, but at the same time introduces increased mileage fuel or energy consumption in electric drivetrain. Regardless of the energy carrier, any increase in energy causes negative effects for the environment. The analysis was focused on the mileage energy consumption of electric passenger cars for a constant speed under real traffic conditions. During the tests, the tested vehicles’ speed on a specially designated road section was changed gradually by 10 km/h, with simultaneous recording of the car’s traction parameters and mileage energy consumption. An analysis of the mileage energy consumption was then carried out for the assumed fleet of cars travelling one after another (in a so-called traffic jam), while maintaining a safe distance. This allowed for the calculation of the environment’s energy burden caused by a fleet of vehicles travelling on a given road section, indicating that a reduction in vehicle speed causes an increase in the vehicles’ energy consumption. Both total and mileage energy consumption of electric vehicles were analysed during the tests.

MATEC Web of Conferences, open access proceedings in Materials science, Engineering and Chemistry

In this paper, particular attention is paid to an advanced variant of the plug-in hybrid electric vehicle, known as PHEV, which combines two functionalities: the vehicle’s internal combustion engine (ICE) and the electric motor. The study described herein also presents the influence of factors such as the ambient temperature, vehicle speed and traffic distance on the PHEV’s energy consumption. It has been shown that the vehicle’s range estimated based on its electronic control module (ECU) is about 20% shorter per annum on average for its year-round operation in everyday driving conditions. When analyzing the energy consumption based on the vehicle’s unitary energy consumption model, attention was paid to values that are strongly correlated with traffic and weather conditions. In addition, the authors emphasized that the estimated total energy consumption of a battery electric vehicle (BEV) or hybrid vehicle (PHEV), relative to the normative values arising from the type approval test cycle, deviate from the actual values arising from real driving conditions and often vary substantially. As shown in this paper, the energy consumption intensity of a vehicle is significantly influenced not only by its speed but also by weather conditions, including ambient temperature. In extreme cases, energy consumption intensity can increase by up to 68% relative to a WLTP (Worldwide Harmonized Light Vehicle Test Procedure) cycle.