ALIREZA ESMAEILZADEH

Mr. ALIREZA ESMAEILZADEH

Centre of Advanced Materials, Department of Mechanical Engineering, Faculty of Engineering,
orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 December 2020 in Energies
Verified
Journal Article
Open access
PDF file
ALIREZA ESMAEILZADEHALIREZA ESMAEILZADEH
ALIREZA ESMAEILZADEH
Mahyar SilakhoriMahyar Silakhori
Mahyar Silakhori
NGNik Nazri Nik Ghazali
Nik Nazri Nik Ghazali
HMHenk Metselaar
Henk Metselaar
AMAzuddin Mamat
Azuddin Mamat
SISoudeh Iranmanesh
Soudeh Iranmanesh
Experimental and numerical modeling of a heat pipe included with a phase change heat transfer was developed to assess the effects of three parameters of nanofluid, heat pipe inclination angles, and input heating power. Distilled water (DW) and 1-pyrene carboxylic-acid (PCA)-functionalized graphene nanofluid (with concentrations of 0.06 wt%) were used as working fluids in the heat pipe. A computational fluid dynamic (CFD) model was developed for evaluation of the heat transfer and two-phase flow through the steady-state process of the heat pipe. It was found that inclination significantly affects the heat transfer of the heat pipe. Maximum increment of thermal performance in the heat pipe reached 49.4% by using 0.06 wt% of PCA-functionalized graphene as working fluids. The result associated with this comparison indicates that the highest deviation is less than 6%, consequently confirming that the CFD model was successful in reproducing the heat and mass transfer processes in the DW and nanofluids charged heat pipe. The results of CFD simulation have good agreement between predicted temperature profiles and experimental data.

6 May 2016 in Energies
Verified
Journal Article
Open access
PDF file
STSeyedsaeed Tabatabaeikia
Seyedsaeed Tabatabaeikia
NGNik Nazri Nik Ghazali
Nik Nazri Nik Ghazali
Chong Wen TongChong Wen Tong
Chong Wen Tong
BSBehzad Shahizare
Behzad Shahizare
Ahmad FazlizanAhmad Fazlizan
Ahmad Fazlizan
NINima Izadyar
Nima Izadyar
Recovering energy from exhaust air systems of building cooling towers is an innovative idea. A specific wind turbine generator was designed in order to achieve this goal. This device consists of two Giromill vertical axis wind turbines (VAWT) combined with four guide vanes and two diffuser plates. It was clear from previous literatures that no comprehensive flow behavior study had been carried out on this innovative device. Therefore, the working principle of this design was simulated using the Analysis System (ANSYS) Fluent computational fluid dynamics (CFD) package and the results were compared to experimental ones. It was perceived from the results that by introducing the diffusers and then the guide vanes, the overall power output of the wind turbine was improved by approximately 5% and 34%, respectively, compared to using VAWT alone. In the case of the diffusers, the optimum angle was found to be 7°, while for guide vanes A and B, it was 70° and 60° respectively. These results were in good agreement with experimental results obtained in the previous experimental study. Overall, it can be concluded that exhaust air recovery turbines are a promising form of green technology.