Ahmed Serag Faried

Prof. Ahmed Serag Faried

Associate professor of Civil Engineering Fayoum University Egypt
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 October 2020 in Materials
Verified
Journal Article
Open access
PDF file
SMSahar A. Mostafa
Sahar A. Mostafa
Ahmed Serag FariedAhmed Serag Faried
Ahmed Serag Faried
AFA.A. Farghali
A.A. Farghali
MEMohamed M. EL-Deeb
Mohamed M. EL-Deeb
TTTaher A. Tawfik
Taher A. Tawfik
MAMohamed Abdelrahman
Mohamed Abdelrahman
This investigation presents the influence of various types of nanoparticles on the performance of ultra high performance concrete (UHPC). Three nanoparticles from waste materials include nano-crushed glass, nano-metakaolin, nano-rice husk ash were prepared using the milling technique. In addition, nano-silica prepared using chemical method at the laboratory is implemented to compare the performance. Several UHPC mixes incorporating different dosages of nanoparticles up to 5% are prepared and tested. Mechanical properties, durability as well as the microstructure of UHPC mixes have been evaluated in order to study the influence of nanoparticles on the hardened characteristics of UHPC. The experimental results showed that early strength is increased by the incorporation of nanomaterials, as compared to the reference UHPC mix. The incorporation of 3% nano-rice husk ash produced the highest compressive strength at 91 day. Microstructural measurements using Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Analysis (EDX), and Thermogravimetric Analysis (TGA) confirm the role of nanomaterials in densifying the microstructure, reducing calcium hydroxide content as well as producing more C-S-H, which improves the strength and reduces the absorption of UHPC. Nanoparticles prepared from waste materials by the milling technique are comparable to chemically prepared nanosilica in improving mechanical properties, refining the microstructure and reducing the absorption of UHPC.

27 October 2023 in Materials
Verified
Journal Article
Open access
PDF file
FMFatma El-Zahraa M. Mostafa
Fatma El-Zahraa M. Mostafa
Piotr SmarzewskiPiotr Smarzewski
Piotr Smarzewski
GHGhada M. Abd El Hafez
Ghada M. Abd El Hafez
AFA.A. Farghali
A.A. Farghali
WMWafaa M. Morsi
Wafaa M. Morsi
TTTaher A. Tawfik
Taher A. Tawfik
The goal of this paper is to investigate the impact of nano-materials on the mechanical and electrochemical properties of self-cleaning concrete. Nano-titanium dioxide and nano-zinc oxide were used as additives for this purpose. Additionally, a comparative study on the effect of using these materials on the self-cleaning concrete’s characteristics was conducted. The dosages of nano-titanium dioxide (nps-TiO2) and nano-zinc oxide (nps-ZnO) used were 0, 0.5, 1, 1.5, 2, and 2.5% and 0, 1, 2, and 3% of the weight of the cement, respectively. The results showed that the optimum compressive strength and the lowest corrosion rate were fulfilled at 2.5% of nps-TiO2 and 1% of nps-ZnO, and using 2.5% of nps-TiO2 achieved the highest improvement in the corrosion rate. However, 1% for nps-TiO2 mixtures and 1% for nps-ZnO mixtures were the best ratios for flexural strength. On the other hand, for the corrosion rate, the samples were tested at 2 and 6 months. When nps-TiO2 and nps-ZnO samples were compared to the control sample, 2.5% and 1% of nps-TiO2 and nps-ZnO, respectively, showed the largest improvement in resistance to corrosion. Also, the self-cleaning property of the samples containing nano-materials (nps-TiO2 and nps-ZnO) was tested. As the results illustrated, the self-cleaning property of the samples was increased over time due to photocatalytic degradation. Furthermore, the results of the photocatalytic tests showed that nps-TiO2 samples outperformed nps-ZnO samples overall.

14 March 2017 in American Journal of Civil Engineering
Verified
Journal Article
Open access
PDF file
MAMagdy A. Abd-ElAziz
Magdy A. Abd-ElAziz
Ahmed Serag FariedAhmed Serag Faried
Ahmed Serag Faried
MKMahmoud Kamel
Mahmoud Kamel
This paper aims to study the fresh, thermal and mechanical properties of lightweight concrete (LWC) incorporating expanded polystyrene foam (EPS) beads as a lightweight aggregate (LWA). Various mixtures of EPS foamed concrete are produced by partial replacing normal aggregates by 0%, 15%, 25%, 35% and 50% of EPS foam beads by volume. In EPS foamed concrete, the ordinary Portland cement (OPC) was replaced by silica fume (SF) with different ratios 0%, 5%, 10 and 15% by weight. Sixteen mixtures are prepared to investigate the fresh, thermal and mechanical properties of EPS foamed concrete. The test program includes determination of fresh density, slump, compacting factor, compressive strength, splitting tensile strength, flexural strength, modulus of elasticity and thermal conductivity. Generally, using of EPS beads in concrete decreases its mechanical properties and thermal conductivity, although the workability improvement. Replacing the OPC with SF improves the mechanical properties of EPS foamed concrete, this improvement continues to the percentage of 10% and ultimate improvement in the ratio of 5%. Modulus of elasticity improves in EPS foamed concrete with SF content till 25% EPS foam. The workability of EPS foamed concrete decreases with the increasing of SF ratios.


27 November 2020 in Journal of Engineering Research and Reports
Verified
Journal Article
Open access
PDF file
MFManal M. Farag
Manal M. Farag
MYMagdy El- Yamany
Magdy El- Yamany
Ahmed Serag FariedAhmed Serag Faried
Ahmed Serag Faried
WSW. H. Sofi
W. H. Sofi
Concrete is probably the most extensively used construction material in the world. The modern concept of construction is directed at the use of recycled materials, in particular, various waste products. This solves a number of problems -saving the expensive materials; - decreasing CO2 emissions by reducing the production of construction materials, so, these can also be used as refractory materials. Plant fibers are the most abundant fiber among all the natural fibers. Bamboo, palm, sisal, jute, date kernel, flax etc. are the commonly known plant fibers. Plant fibers are also called cellulosic fiber and have quite promising tensile strength. Natural Plant fibers treated by pyrolysis in concrete such as additions; determine the effect of these substances and the effect of temperature on the properties of concrete. The natural fibers in concrete are added accordingly with the percentage of 0.5%, 1%, 1.5% and 2% by weight of cement concrete cubes are tested at the age of 7 and 28 days of curing. Natural waste treated by pyrolysis and different additives on concrete behavior to improve its performance in the future to use in Civil Engineering and Construction World. The optimum result for natural fibers was observed at 1.0% for bamboo and date kernel and 1.5% for palm oil of natural fiber.

22 May 2026 in Materials
Verified
Journal Article
Open access
PDF file
Ahmed Serag FariedAhmed Serag Faried
Ahmed Serag Faried
NFNourhan Fathy
Nourhan Fathy
WMW. M. Morsi
W. M. Morsi
MDMaher Dawoud
Maher Dawoud
Abdelhalim Shokry MahmoudAbdelhalim Shokry Mahmoud
Abdelhalim Shokry Mahmoud
KOKhaled M. Osman
Khaled M. Osman
This study aims to explore the effect of using three distinct silicate- and aluminate-rich rock powders—granodiorite (GDP), alkali-feldspar granite (AFGP), and mafic metavolcanic (MMVP)—sourced from Egypt’s largely unexploited Eastern Desert geological resources, as supplementary cementitious materials (SCMs) in concrete production. Rock samples were processed into ultrafine powders (1.4–1.5 μm average particle size) and utilized as partial cement replacements at 3%, 6%, 9%, and 12% by weight. These rock powders were confirmed to meet ASTM C618 requirements for natural pozzolans, qualifying them as viable SCMs. Pozzolanic activity was confirmed through Strength Activity Index (SAI) testing, with values of 79%, 82%, and 76% for GDP, AFGP, and MMVP, respectively, all exceeding the 75% minimum threshold required by ASTM C618. Fresh concrete workability decreased progressively with increasing rock powder content. Mechanical testing demonstrated optimal replacement levels of 9% for GDP and AFGP, and 6% for MMVP, achieving 28-day compressive strength improvements of 14.1%, 16.0%, and 14.9%, respectively, compared to plain Portland cement concrete without any rock powder replacement (control mix). Splitting tensile strength increased by 14.7%, 12.7%, and 16.3% at optimal dosages. Microstructural analysis via SEM revealed enhanced matrix densification and reduced porosity through physical filler effects and pozzolanic reactions. Energy-dispersive X-ray spectroscopy (EDX) confirmed reduced Ca/Si ratios, indicating enhanced calcium silicate hydrate (C-S-H) gel formation with superior binding characteristics. Results demonstrate that these previously unexploited rock powders effectively function as sustainable SCMs, reducing cement consumption by up to 12%, offering significant environmental benefits through reduced CO2 emissions and efficient utilization of natural geological resources in sustainable construction practices.