Alanood A. Alsarayreh

Dr. Alanood A. Alsarayreh

chemical engineering, Mutah University, Karak, Jordan
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 March 2023 in Membranes
Verified
Journal Article
Open access
PDF file
BIBakr M. Ibraheem
Bakr M. Ibraheem
Saif Al AaniSaif Al Aani
Saif Al Aani
AAAlanood A. Alsarayreh
Alanood A. Alsarayreh
Qusay F. AlsalhyQusay F. Alsalhy
Qusay F. Alsalhy
ISIssam K. Salih
Issam K. Salih
Forward osmosis (FO) is a low-energy treatment process driven by osmosis to induce the separation of water from dissolved solutes/foulants through the membrane in hydraulic pressure absence while retaining all of these materials on the other side. All these advantages make it an alternative process to reduce the disadvantages of traditional desalination processes. However, several critical fundamentals still require more attention for understanding them, most notably the synthesis of novel membranes that offer a support layer with high flux and an active layer with high water permeability and solute rejection from both solutions at the same time, and a novel draw solution which provides low solute flux, high water flux, and easy regeneration. This work reviews the fundamentals controlling the FO process performance such as the role of the active layer and substrate and advances in the modification of FO membranes utilizing nanomaterials. Then, other aspects that affect the performance of FO are further summarized, including types of draw solutions and the role of operating conditions. Finally, challenges associated with the FO process, such as concentration polarization (CP), membrane fouling, and reverse solute diffusion (RSD) were analyzed by defining their causes and how to mitigate them. Moreover, factors affecting the energy consumption of the FO system were discussed and compared with reverse osmosis (RO). This review will provide in-depth details about FO technology, the issues it faces, and potential solutions to those issues to help the scientific researcher facilitate a full understanding of FO technology.

11 April 2024 in Processes
Verified
Journal Article
Open access
PDF file
Mudhar A. Al-ObaidiMudhar A. Al-Obaidi
Mudhar A. Al-Obaidi
Salih AlsadaieSalih Alsadaie
Salih Alsadaie
AAAlanood A. Alsarayreh
Alanood A. Alsarayreh
Md. Tanvir SowgathMd. Tanvir Sowgath
Md. Tanvir Sowgath
Iqbal M MujtabaIqbal M Mujtaba
Iqbal M Mujtaba
Desalination plants, which provide drinking water for residents, rely on electricity generated by fossil fuels. However, the excessive use of fossil fuels leads to their rapid depletion and has detrimental effects on the environment. Thus, the use of renewable energy resources in water desalination has gained popularity. The current research investigates the integration of renewable energy systems with seawater and brackish water desalination technologies. In this regard, three primary renewable energy sources—wind, solar, and geothermal—are selected. Accordingly, a thorough investigation of the related research published and the trend of evolutions between 2013 and 2023 is carried out for Reverse Osmosis (RO), Multistage flash (MSF), and Multi-effect distillation (MED)-based water desalination facilities coupled with renewable energy sources. In our investigation, we particularly focus on performance indicators, energy efficiency, economic factors, and environmental effects. Also, the associated challenges of these hybrid systems, such as technological complexity, unpredictability, and intermittency, are addressed. Prospects for the future that address these issues and the prospects of using renewable energy in water desalination technologies are also covered.

18 May 2023 in Designs
Verified
Journal Article
Open access
PDF file
Farhan LaftaFarhan Lafta
Farhan Lafta
AKAmr Kaood
Amr Kaood
Mudhar A. Al-ObaidiMudhar A. Al-Obaidi
Mudhar A. Al-Obaidi
Hayder MohammedHayder Mohammed
Hayder Mohammed
AAAlanood A. Alsarayreh
Alanood A. Alsarayreh
Iqbal M MujtabaIqbal M Mujtaba
Iqbal M Mujtaba
The desalination of saltwater is a viable option to produce freshwater. All the desalination processes are energy-intensive and can be carried out on a large scale. Therefore, producing freshwater using renewable energy sources is the most desirable option considering the current energy crisis and the effect that fossil-fuel-based energy has on our carbon footprint. In this respect, the tray-type still, one of several solar power desalination still varieties, is popular owing to its straightforward design, economic materials of construction, and minimal maintenance requirements, especially in isolated island regions with restricted energy and natural water supplies. The traditional tray-type solar power has a few drawbacks, such as the inability to recover latent heat from condensation, reduced thermal convection, a large heat capacity, and comparatively minimal driving power through evaporation. Therefore, the improvement of heat and mass transfer capabilities in tray-type stills has been the subject of many studies. However, there is a lack of a comprehensive review in the open literature that covers the design and operational details of multistage solar stills. The purpose of this paper is to present a thorough overview of the past research on multistage solar stills, in terms of configurations, capabilities, and cutting-edge options. In comparison to a unit without a salt-blocking formation, the review indicates that a multistage distillation unit may run continuously at high radiation and generate pure water that is around 1.7 times higher than a unit without a salt-blocking formation. The most effective deign is found to be “V”-shaped solar still trays that attach to four-stage stills, since they are less expensive and more economical than the “floor” (Λ-shape) design, which requires two collectors. Additionally, it can be stated that the unit thermal efficiency, solar percentage, and collected solar energy (over the course of a year) increase by 23%, 18%, and 24%, respectively, when the solar collectors are increased by 26% (at the constant inflow velocity of the water).

23 December 2021 in Membranes
Verified
Journal Article
Open access
PDF file
AAAlanood A. Alsarayreh
Alanood A. Alsarayreh
Mudhar A. Al-ObaidiMudhar A. Al-Obaidi
Mudhar A. Al-Obaidi
Alejandro Ruiz-GarcíaAlejandro Ruiz-García
Alejandro Ruiz-García
Rajnikant PatelRajnikant Patel
Rajnikant Patel
Iqbal M MujtabaIqbal M Mujtaba
Iqbal M Mujtaba
The reverse osmosis (RO) process is one of the most popular membrane technologies for the generation of freshwater from seawater and brackish water resources. An industrial scale RO desalination consumes a considerable amount of energy due to the exergy destruction in several units of the process. To mitigate these limitations, several colleagues focused on delivering feasible options to resolve these issues. Most importantly, the intention was to specify the most units responsible for dissipating energy. However, in the literature, no research has been done on the analysis of exergy losses and thermodynamic limitations of the RO system of the Arab Potash Company (APC). Specifically, the RO system of the APC is designed as a medium-sized, multistage, multi pass spiral wound brackish water RO desalination plant with a capacity of 1200 m3/day. Therefore, this paper intends to fill this gap and critically investigate the distribution of exergy destruction by incorporating both physical and chemical exergies of several units and compartments of the RO system. To carry out this study, a sub-model of exergy analysis was collected from the open literature and embedded into the original RO model developed by the authors of this study. The simulation results explored the most sections that cause the highest energy destruction. Specifically, it is confirmed that the major exergy destruction happens in the product stream with 95.8% of the total exergy input. However, the lowest exergy destruction happens in the mixing location of permeate of the first pass of RO desalination system with 62.28% of the total exergy input.

7 September 2022 in Engineering and Technology Journal
Verified
Journal Article
Open access
PDF file
AAAlanood A. Alsarayreh
Alanood A. Alsarayreh
TATaisir K. Abbas
Taisir K. Abbas
SASaleh O. Alaswad
Saleh O. Alaswad
SESabad E-Gul
Sabad E-Gul
ABA D. Bajoga
A D. Bajoga
Radioactive waste is generated from fuel cycle processes in nuclear reactors and nuclear power plants (NPPs) in electrical power production, radioisotope manufacturing in nuclear research centers, and medical, industrial, and agricultural applications. Also, natural chain-linked radioisotopes (NORM) are generated from processing and burning fossil fuels and producing oil and natural gas. Therefore, a planned and integrated radioactive waste management strategy must be adopted to protect human health and the environment from the dangers of this waste through published research on a comprehensive radioactive waste management strategy and the testing and dissemination of several treatment options. The main objective is to draw the scientific community's attention to the possibility of using pressure-driven membrane separation in treating radioactive wastewater compared to conventional methods. This short review addresses developments in the treatment and removal of radioactive effluents (LRWs) by pressure-driven membrane methods and improvements in routine treatment of dissolved radioactive ions by chemical treatment of the feed solution followed by membrane separation. Also, recent advances in treating radioactive waste use nanoparticles (NPs) incorporated in polymeric membranes.

5 December 2023 in Membranes
Verified
Journal Article
Open access
PDF file
BIBashar Ismael
Bashar Ismael
FKFaidhalrahman Khaleel
Faidhalrahman Khaleel
Salah IbrahimSalah Ibrahim
Salah Ibrahim
SKSamraa R. Khaleel
Samraa R. Khaleel
MAMohamed AlOmar
Mohamed AlOmar
AAAlanood A. Alsarayreh
Alanood A. Alsarayreh
Vacuum membrane distillation (VMD) has attracted increasing interest for various applications besides seawater desalination. Experimental testing of membrane technologies such as VMD on a pilot or large scale can be laborious and costly. Machine learning techniques can be a valuable tool for predicting membrane performance on such scales. In this work, a novel hybrid model was developed based on incorporating a spotted hyena optimizer (SHO) with support vector machine (SVR) to predict the flux pressure in VMD. The SVR–SHO hybrid model was validated with experimental data and benchmarked against other machine learning tools such as artificial neural networks (ANNs), classical SVR, and multiple linear regression (MLR). The results show that the SVR–SHO predicted flux pressure with high accuracy with a correlation coefficient (R) of 0.94. However, other models showed a lower prediction accuracy than SVR–SHO with R-values ranging from 0.801 to 0.902. Global sensitivity analysis was applied to interpret the obtained result, revealing that feed temperature was the most influential operating parameter on flux, with a relative importance score of 52.71 compared to 17.69, 17.16, and 14.44 for feed flowrate, vacuum pressure intensity, and feed concentration, respectively.