Chemical pollutants, such as methyl orange (MO), constitute the main ingredients in the textile industry wastewater, and specifically, the dyeing process. The use of such chemicals leads to huge quantities of unfixed dyes to make their way to the water effluent and consequently escalates the water pollution problem. This work investigates the incorporation of hydrophobic carbon nanospheres (CNS) prepared from the pyrolysis of acetylene using the chemical vapor deposition technique with poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) in order to enhance its hydrophobicity. Moreover, a deep eutectic solvent (DES) was used to enhance the membrane’s porosity. The former was based on the quaternary ammonium salt (N,N-diethyl-ethanol-ammonium chloride) as a chemical addition throughout the membrane synthesis. Direct contact membrane distillation (DCMD) was employed to assess the performance of the modified membrane for treatment of MO contaminated water. The phase inversion method was used to embed various contents of CNS (i.e., 1.0, 3.0, and 5.0 wt.%) with 22:78 wt.% of PVDF-co-HFP/N-Methyl-2-pyrrolidone solution to prepare flat-sheet membranes. The membrane embedded with 5 wt.% CNS resulted in an increase in membrane hydrophobicity and presented considerable enhancement in DCMD permeation from 12 to 35 L/h.m2 with salt rejection >99.9%. Moreover, the composite membrane showed excellent anti-biofouling and mechanical characteristics as compared to the pristine counterpart. Using this membrane, a complete rejection of MO was achieved due to the synergistic contribution of the dye negative charge and the size exclusion effect.
Some Clayey soils are generally categorized as weak soils, and structures lying on such soils have been exposed to severe damage. Therefore, the central thesis of this paper is the impact of a waste material known as a silica fume as nano and micro material on soil’s behaviour. To evaluate the effects of those additives on Atterberg limits, compaction characteristics and unconfined compressive strength, clayey soil samples have been transformed using micro and nano silica fume (by-product materials). In the current investigation, silica fume is used at four different percentages: 0, 2, 4, and 7%. The results show that the plasticity index of soil decreases with the addition of micro silica and increases with the addition of nano-silica. Increasing nano silica percentage improves the dry density of the compacted soil and reduces the optimum moisture content. An opposite behavior is observed with adding micro silica to compacted soil. Finally, 4% of silica fume is found to be the optimum dosage to improve the unconfined compressive strength of the treated soil with both additives. As a result, treating the weak clay soil with micro and/or nano-silica fume has the potential to be impactful.
Vacuum membrane distillation (VMD) has attracted increasing interest for various applications besides seawater desalination. Experimental testing of membrane technologies such as VMD on a pilot or large scale can be laborious and costly. Machine learning techniques can be a valuable tool for predicting membrane performance on such scales. In this work, a novel hybrid model was developed based on incorporating a spotted hyena optimizer (SHO) with support vector machine (SVR) to predict the flux pressure in VMD. The SVR–SHO hybrid model was validated with experimental data and benchmarked against other machine learning tools such as artificial neural networks (ANNs), classical SVR, and multiple linear regression (MLR). The results show that the SVR–SHO predicted flux pressure with high accuracy with a correlation coefficient (R) of 0.94. However, other models showed a lower prediction accuracy than SVR–SHO with R-values ranging from 0.801 to 0.902. Global sensitivity analysis was applied to interpret the obtained result, revealing that feed temperature was the most influential operating parameter on flux, with a relative importance score of 52.71 compared to 17.69, 17.16, and 14.44 for feed flowrate, vacuum pressure intensity, and feed concentration, respectively.
28 March 2024 in Modeling Earth Systems and Environment