Anatoli Rontogianni

Ms. Anatoli Rontogianni

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 August 2020 in Catalysts
Verified
Journal Article
Open access
PDF file
GBGeorgia Botzolaki
Georgia Botzolaki
GGGrammatiki Goula
Grammatiki Goula
ARAnatoli Rontogianni
Anatoli Rontogianni
ENErsi Nikolaraki
Ersi Nikolaraki
NCNikolaos Chalmpes
Nikolaos Chalmpes
Ioannis YentekakisIoannis Yentekakis
Ioannis Yentekakis
CO2 hydrogenation toward methane, a reaction of high environmental and sustainable energy importance, was investigated at 200–600 °C and H2/CO2 = 4/1, over Rh nanoparticles dispersed on supports with different oxygen storage capacity characteristics (γ-Al2O3, alumina-ceria-zirconia, and ceria-zirconia). The effects of the support OSC and Rh particle size on reaction behavior under both integral and differential conditions were investigated, to elucidate the combined role of these crucial catalyst design parameters on methanation efficiency. A volcano-type variation of methanation turnover frequency was found in respect to support OSC; Rh/ACZ, with intermediate OSC, was the optimal catalyst. The structure sensitivity of the reaction was found to be a combined function of support OSC and Rh particle size: For Rh/γ-Al2O3 (lack of OSC) methanation was strongly favored on small particles—the opposite for Rh/CZ (high OSC). The findings are promising for rational design and optimization of CO2 methanation catalysts by tailoring the aforementioned characteristics.

25 August 2023 in Chemical Engineering Journal
Verified
Journal Article
Closed access
ARAnatoli Rontogianni
Anatoli Rontogianni
NCNikolaos Chalmpes
Nikolaos Chalmpes
ENE. Nikolaraki
E. Nikolaraki
GBG. Botzolaki
G. Botzolaki
AAA. Androulakis
A. Androulakis
Ioannis YentekakisIoannis Yentekakis
Ioannis Yentekakis

18 May 2022 in Water
Verified
Journal Article
Open access
PDF file
Andreas AngelakisAndreas Angelakis
Andreas Angelakis
MVMohammad Valipour
Mohammad Valipour
JDJörg Dietrich
Jörg Dietrich
Konstantinos (Kostas) S. VoudourisKonstantinos (Kostas) S. Voudouris
Konstantinos (Kostas) S. Voudouris
RKRohitashw Kumar
Rohitashw Kumar
Theocharis TsoutsosTheocharis Tsoutsos
Theocharis Tsoutsos
Nowadays, the reuse of built agricultural/industrial heritage has been a common practice worldwide. These structures represent excellent symbols of the great agricultural/industrial past. These agricultural/hydro-technologies also serve as monuments of socio-cultural identities, especially in rural areas and on small farms. One example of a successful application of agricultural technologies for small farms is the water mill. By harnessing the water energy, they were used for traditional flour and other goods production (e.g., olive oil) and works requiring energy, with the main role in the evolution of the traditional/cultural landscape. Water mills have been used to drive a mechanical process of milling, hammering, and rolling and are a portion of the agricultural, cultural, and industrial heritage. For approximately two millennia, the vertical mill water wheel prepared the initial source of mechanical power in many regions of the world. Water mills were the first device that converted natural resources of energy into mechanical energy in order to operate some form of machinery. The preservation/management of water mills is challenging due to their long-term abandonment and the lack of information/knowledge about their value. The other obstacles that are faced in their retrofitting and/or preservation are the lack of sufficient economic incentives and complex authorizations/legislations. Sustainability and regeneration of water mills through the centuries are then reviewed for history and agricultural/industrial “archaeology”. The history of water-powered mills in prehistoric and historic times, including ancient Persia/Iran, ancient China, ancient India, the Islamic world, Venetian Crete, medieval Europe, America, and finally present times, is discussed. The outcome of this review allows the understanding of the importance of conservation, optimization, and development of water mills. It will help to know more and achieve sustainable/regenerative development for small farms with respect to water and energy crises at present and in the future.

19 July 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
Alessandro CarmonaAlessandro Carmona
Alessandro Carmona
ARAnatoli Rontogianni
Anatoli Rontogianni
MZMyrto Zeneli
Myrto Zeneli
Panagiotis GrammelisPanagiotis Grammelis
Panagiotis Grammelis
OBOlgu Gizem Birgi
Olgu Gizem Birgi
Clara Jarauta-CórdobaClara Jarauta-Córdoba
Clara Jarauta-Córdoba
In the quest for a sustainable future, energy-intensive industries (EIIs) stand at the forefront of Europe’s decarbonisation mission. Despite their significant emissions footprint, the path to comprehensive decarbonisation remains elusive at EU and national levels. This study scrutinises key sectors such as non-ferrous metals, steel, cement, lime, chemicals, fertilisers, ceramics, and glass. It maps out their current environmental impact and potential for mitigation through innovative strategies. The analysis spans across Spain, Greece, Germany, and the Netherlands, highlighting sector-specific ecosystems and the technological breakthroughs shaping them. It addresses the urgency for the industry-wide adoption of electrification, the utilisation of green hydrogen, biomass, bio-based or synthetic fuels, and the deployment of carbon capture utilisation and storage to ensure a smooth transition. Investment decisions in EIIs will depend on predictable economic and regulatory landscapes. This analysis discusses the risks associated with continued investment in high-emission technologies, which may lead to premature decommissioning and significant economic repercussions. It presents a dichotomy: invest in climate-neutral technologies now or face the closure and offshoring of operations later, with consequences for employment. This open discussion concludes that while the technology for near-complete climate neutrality in EIIs exists and is rapidly advancing, the higher costs compared to conventional methods pose a significant barrier. Without the ability to pass these costs to consumers, the adoption of such technologies is stifled. Therefore, it calls for decisive political commitment to support the industry’s transition, ensuring a greener, more resilient future for Europe’s industrial backbone.

14 June 2024 in Biofuels, Bioproducts and Biorefining
Verified
Journal Article
Open access
MKMichalis Alexandros Kougioumtzis
Michalis Alexandros Kougioumtzis
VFVasileios Filippou
Vasileios Filippou
ARAnatoli Rontogianni
Anatoli Rontogianni
EKEmmanouil Karampinis
Emmanouil Karampinis
PGPanagiotis Grammelis
Panagiotis Grammelis
Emmanuel KakarasEmmanuel Kakaras
Emmanuel Kakaras
Coffee consumption is a daily habit for the majority of people worldwide, resulting in consistently large amounts of residue. Spent coffee ground (SCG) is the residue obtained during the brewing process. It represents an abundant source of energy biomass, or raw material for added value products but it is still largely unexploited. This residue may find several applications, such as in polymers/composites precursors, solid/liquid biofuels, biofertilizers, and so forth. The aim of the present paper was the pilot production of pellets by mixing SCG and other residual biomass feedstock. Coffee residues were mixed at different ratios (0, 10, 30, 50, 70, 90 wt%) together with: (i) forestry residues; (ii) sawmill residues; (iii) urban prunings; (iv) maize residues; (v) peach prunings; and (vi) miscanthus. Samples of each fuel mixture were analyzed at the Solid Fuels Laboratory of CPERI/CERTH (Chemical Process and Energy Resources Institute/Centre for Research and Technology Hellas) in Greece by applying established standards. The results of the analyses show that the mixing of biomass residues with coffee could result in competitive solid biofuels. More specifically, pellets with up to 10% coffee residues, mixed with sawmill residues, complied with the class A2 limits set by the international standard ISO 17225‐2 for wood pellets, and pellets with up to 30% coffee residues complied with the class B limits for wood pellets for commercial/residential applications. Urban prunings mixed with 10 wt% coffee residues are within the limits set for class B wood pellets.

31 January 2026 in Waste
Verified
Journal Article
Open access
PDF file
IKIoannis Kontodimos
Ioannis Kontodimos
CEChristos Evaggelou
Christos Evaggelou
ARAnatoli Rontogianni
Anatoli Rontogianni
NIKOLAOS MARGARITISNIKOLAOS MARGARITIS
NIKOLAOS MARGARITIS
Panagiotis GrammelisPanagiotis Grammelis
Panagiotis Grammelis
Maria GoulaMaria Goula
Maria Goula
A rapidly emerging approach within the scientific community involves the utilization of waste streams for renewable energy generation, particularly through biomethane production. A key aspect of this approach lies in the co-digestion of diverse waste streams, which can enhance process efficiency and contribute to a more effective reduction in the organic load. The present study investigates the anaerobic digestion of a mixture of food waste leachates and dairy waste (cheese whey wastewater), with a dual objective: to evaluate the reduction in organic-load efficiency of the mixed substrate and to assess the production of biogas enriched in biomethane content. Three distinct mixing ratios by volume of the two waste streams (25%/75%, 50%/50% and 75%/25%) were subjected to an anaerobic digestion process under the same SIR. The performance of each mixture was assessed in terms of both reduction in organic-load efficiency and biomethane yield, followed by a comparative analysis to identify the optimal mixing ratio. The results indicate that while the organic-load reduction remains consistently effective across all mixing ratios, the biomethane production potential is notably higher for the 25%/75% waste mixture, highlighting it as the most promising configuration for both energy recovery and waste treatment efficiency.