Md. Ismail Hossain

Dr. Md. Ismail Hossain

Department of Textile Engineering, Khulna University of Engineering & Technology, Khulna, Bangladesh
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 August 2021 in Heliyon
Verified
Journal Article
Open access
MHMd. Ismail Hossain
Md. Ismail Hossain
MOMoniruzzaman
Moniruzzaman
MAManiruzzaman
Maniruzzaman
MJMohammad Abdul Jalil
Mohammad Abdul Jalil
The aim of this study was to investigate and compare the effect of process variables on the color and physical characteristics of viscose and cotton knitted fabrics. The effect of dye concentration, salt concentration, soda ash, dyeing time, dyeing temperature, material to liquor ratio, different dye class, fabric GSM, washing time, washing temperature, and enzyme concentration were investigated in terms of color strength (K/S value), color fastness, and pilling resistance. The K/S value of the colored fabric was calculated using UV visible spectrophotometer SF 650 TM and the pilling resistance of the enzyme-treated fabrics was tested by an ICI pilling tester. The results show that dye concentration has the greatest and key effect on the K/S value of viscose and cotton fabric. However, viscose fabric shows a higher K/S value than that of cotton fabric in similar dyeing conditions. Furthermore, the multi-functional dyes demonstrate the upmost K/S value than the vinyl sulphone dyes. Moreover, it was found that enzymatic treatment improved the pilling grade of cotton fabric, whereas no enzymatic effect on viscose fabric was observed.

12 January 2017 in The Journal of the Textile Institute
Verified
Journal Article
Closed access
MHMd. Ismail Hossain
Md. Ismail Hossain
ICImtiaz Ahmed Choudhury
Imtiaz Ahmed Choudhury
AMAzuddin Bin Mamat
Azuddin Bin Mamat
AHAltab Hossain
Altab Hossain
The aim of this paper was to predict the colour strength of viscose knitted fabrics by using fuzzy logic (FL) model based on dye concentration, salt concentration and alkali concentration as input variables. Moreover, the performance of fuzzy logic (FL) model is compared with that of artificial neural network (ANN) model. In addition, same parameters and data have been used in ANN model. From the experimental study, it was found that dye concentration has the main and greatest effects on the colour strength of viscose knitted fabrics. The coefficient of determination (R2), root mean square (RMS) and mean absolute errors (MAE) between the experimental colour strength and that predicted by FL model are found to be 0.977, 1.025 and 4.61%, respectively. Further, the coefficient of determination (R2), root mean square (RMS) and mean absolute errors (MAE) between the experimental colour strength and that predicted by ANN model are found to be 0.992, 0.726 and 3.28%, respectively. It was found that both ANN and FL models have ability and accuracy to predict the fabric colour strength effectively in non-linear domain. However, ANN prediction model shows higher prediction accuracy than that of Fuzzy model.

13 July 2022 in Heliyon
Verified
Journal Article
Open access
MAMd. Abdul Alim
Md. Abdul Alim
MOMoniruzzaman
Moniruzzaman
MHMuzaher Hossain
Muzaher Hossain
WAWahiduzzaman
Wahiduzzaman
Md. Reazuddin ReponMd. Reazuddin Repon
Md. Reazuddin Repon
MJMohammad Abdul Jalil
Mohammad Abdul Jalil
This work investigated the effect of superheated steam (SHS) jute fiber and poly (lactic acid) (PLA) having a weight proportion of 30:70 which were synthesized using the melt blending method. The goal of this treatment was to boost up the fiber-polymer interfacial linkage. The action was conducted in a superheated steam oven at various times (30–120 min) and temperatures (170–220 °C). The biocomposites were assessed in terms of mechanical characteristics, dimensional stability and morphological properties. Compared to different treatment temperatures, the results showed that treatment at 210 °C for 60 min offered the best tensile characteristics. Because of the presence of SHS-Jute, the tensile, impact, bending and dimensional stability of the bio-composites have been improved. The FTIR and SEM study revealed progress in the interfacial linkage between SHS-Jute and PLA. This interfacial link improves the bending strength of SHS-Jute-PLA biocomposites by about 15.64%. X-ray diffraction (XRD) investigation also showed an elevation in the crystalline structure with the incorporation of SHS-Jute. The degradation tests of the biocomposite were carried out in deionized water. SHS treatment reduces hemicellulose contents in jute fiber which causes water uptake% reduction is 54% in SHS-Jute-PLA. The SHS-Jute-PLA biocomposite appeared with promising characteristics for utilization as a green and ecological substitute particle board material.

3 June 2022 in Scientific Reports
Verified
Journal Article
Open access
PDF file
MHMd. Ismail Hossain
Md. Ismail Hossain
MIMohammad Tariqul Islam
Mohammad Tariqul Islam
MSMd Samsuzzaman Sobuz
Md Samsuzzaman Sobuz
MMMd. Moniruzzaman
Md. Moniruzzaman
NSNorsuzlin Mohd Sahar
Norsuzlin Mohd Sahar
MIMd. Shabiul Islam
Md. Shabiul Islam
This study has investigated the impact of inverse G-like shape resonators that exhibited epsilon negative (ENG) and near-zero refractive index (NZI) properties for multi-band wireless communications applications. The electrical measurement of structure is 0.118λ × 0.118λ × 0.021 λ, which is calculated at 3.94 GHz. FR-4 is used as a substrate layer, and the resonator is designed on it. This structure is manifested in the ENG and NZI characteristics within the frequency range of 3.8–4.17, 7.68–8.54, 10.67–11.36 GHz, and 4.07–4.15 and 8.29–8.37 GHz, respectively. This study also manifests the polarization insensitivity nature of 0°–90°, and the incident angle is investigated up to 60° for both TE and TM modes. The proposed structure achieves triple resonance at 3.94 GHz, 8.08 GHz, and 11.17 GHz, respectively, included in the S, C, and X frequency bands. The CST Microwave Studio 2019 software is conducted to design, develop, perform analysis, investigate electromagnetic properties, and extract effective medium parameters. The Advanced Design Software (ADS) is used to model the equivalent circuit of the unit cell. The simulated, measured, and ADS results verified the scattering parameter performance. The EMR value of the structure is 8.47, indicating the structure's compactness. The compact design with simplicity, ENG, and NZI properties make the proposed structure significant for microwave application, mainly to enhance the antenna bandwidth and gain filter design. ENG and NZI properties the operation frequency stability and efficiency for low earth orbit nanosatellite communications.

17 October 2023
Verified
Book Chapter
Closed access
PDF file
ABAngona Biswas
Angona Biswas
MNMD Abdullah Al Nasim
MD Abdullah Al Nasim
Md Shahin AliMd Shahin Ali
Md Shahin Ali
MHMd. Ismail Hossain
Md. Ismail Hossain
AUAzim Ullah
Azim Ullah
STSajedul Talukder
Sajedul Talukder

1 March 2015 in Journal of Engineered Fibers and Fabrics
Verified
Journal Article
Closed access
MHMd. Ismail Hossain
Md. Ismail Hossain
AHAltab Hossain
Altab Hossain
ICImtiaz Ahmed Choudhury
Imtiaz Ahmed Choudhury
The aim of this study was to model the color strength of viscose/lycra (95:5) blended knitted fabrics using a fuzzy logic approach where color strength is a function of dye concentration, salt concentration, and alkali concentration. Dye concentration, salt concentration, and alkali concentration are the most important factors affecting color strength of viscose/lycra blended knitted fabrics. Moreover, these factors behave nonlinearly and interact: hence, it is very difficult to develop an exact functional relationship between the input variables and color strength using mathematical models, statistical models, or empirical models. Conversely, artificial neural network models are trained using large amounts of experimental data which is a time consuming process. One possible approach to deal with such a complex process is by using a fuzzy logic expert system (FLES), which perform remarkably well in non-linear and complex systems with minimum experimental data. In this study a laboratory scale experiment was conducted to validate the developed fuzzy model. The model was assessed by analyzing various numerical error criteria. The mean relative error was found to be 3.80%, the correlation coefficient was 0.992, and goodness of fit was 0.986 from the actual and predicted color strengths of the fabrics. The results show that the model developed performed well.