Dr Tina Marolt Cebasek

Dr. Dr Tina Marolt Cebasek

Dr
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 September 2021 in Molecules
Verified
Journal Article
Open access
PDF file
Osamah Al-HashimiOsamah Al-Hashimi
Osamah Al-Hashimi
Khalid HashimKhalid Hashim
Khalid Hashim
ELEdward Loffill
Edward Loffill
DCDr Tina Marolt Cebasek
Dr Tina Marolt Cebasek
INIsmini Nakouti
Ismini Nakouti
Nadhir Al-AnsariNadhir Al-Ansari
Nadhir Al-Ansari
The provision of safe water for people is a human right; historically, a major number of people depend on groundwater as a source of water for their needs, such as agricultural, industrial or human activities. Water resources have recently been affected by organic and/or inorganic contaminants as a result of population growth and increased anthropogenic activity, soil leaching and pollution. Water resource remediation has become a serious environmental concern, since it has a direct impact on many aspects of people’s lives. For decades, the pump-and-treat method has been considered the predominant treatment process for the remediation of contaminated groundwater with organic and inorganic contaminants. On the other side, this technique missed sustainability and the new concept of using renewable energy. Permeable reactive barriers (PRBs) have been implemented as an alternative to conventional pump-and-treat systems for remediating polluted groundwater because of their effectiveness and ease of implementation. In this paper, a review of the importance of groundwater, contamination and biological, physical as well as chemical remediation techniques have been discussed. In this review, the principles of the permeable reactive barrier’s use as a remediation technique have been introduced along with commonly used reactive materials and the recent applications of the permeable reactive barrier in the remediation of different contaminants, such as heavy metals, chlorinated solvents and pesticides. This paper also discusses the characteristics of reactive media and contaminants’ uptake mechanisms. Finally, remediation isotherms, the breakthrough curves and kinetic sorption models are also being presented. It has been found that groundwater could be contaminated by different pollutants and must be remediated to fit human, agricultural and industrial needs. The PRB technique is an efficient treatment process that is an inexpensive alternative for the pump-and-treat procedure and represents a promising technique to treat groundwater pollution.

1 December 2018 in Transportation Geotechnics
Verified
Journal Article
Open access
DCDr Tina Marolt Cebasek
Dr Tina Marolt Cebasek
AEAhmet Furkan Esen
Ahmet Furkan Esen
PWP.K. Woodward
P.K. Woodward
OLOmar Laghrouche
Omar Laghrouche
DCD.P. Connolly
D.P. Connolly

1 February 2020 in Computers & Structures
Verified
Journal Article
Closed access
Jose Adolfo Sainz-AjaJose Adolfo Sainz-Aja
Jose Adolfo Sainz-Aja
JPJ. Pombo
J. Pombo
DTD. Tholken
D. Tholken
ICI. Carrascal
I. Carrascal
JPJ. Polanco
J. Polanco
PWP. Woodward
P. Woodward

1 February 2018 in Journal of Rock Mechanics and Geotechnical Engineering
Verified
Journal Article
Open access
DCDr Tina Marolt Cebasek
Dr Tina Marolt Cebasek
TFThomas Frühwirt
Thomas Frühwirt
The aim of this study is to identify the influence of the dip angle of a pre-existing macrocrack on the lifetime and ultimate deformation of rock-like material. Prediction of lifetime has been studied for three groups of specimens under axial static compressive load levels. The specimens were investigated from 65% to 85% of UCS (uniaxial compressive strength) at an interval of 10% of UCS for the groups of specimens with a single modelled open flaw with a dip angle to the loading direction of 30° (first group), at an interval of 5% of UCS increment for the groups of specimens with single (second group), and double sequential open flaws with a dip angle to the loading direction of 60° (third group). This study shows that crack propagation in specimens with a single flaw follows the same sequences. At first, wing cracks appear, and then shear crack develops from the existing wing cracks. Shear cracking is responsible for specimen failure in all three groups. A slip is expected in specimens from the third group which connects two individual modelled open flaws. The moment of the slip is noticed as a characteristic rise in the axial deformation at a constant load level. It is also observed that axial deformation versus time follows the same pattern, irrespective of local geometry. Specimens from the first group exhibit higher axial deformation under different load levels in comparison with the specimens from the second and third groups.

25 December 2022 in Environments
Verified
Journal Article
Open access
PDF file
Osamah Al-HashimiOsamah Al-Hashimi
Osamah Al-Hashimi
Khalid HashimKhalid Hashim
Khalid Hashim
ELEdward Loffill
Edward Loffill
INIsmini Nakouti
Ismini Nakouti
AFAyad Faisal
Ayad Faisal
DCDr Tina Marolt Cebasek
Dr Tina Marolt Cebasek
The novel aspect of this research is the fabrication, characterisation, and application of an engineered adsorbent made from quartz sand coated with calcium ferric oxides (QS/CFO) derived from the wastepaper sludge ash (WPSA) for the removal of tetracycline (TC) from synthetic water. Initially, the new adsorbent was fabricated using a Ca/Fe molar ratio, sand/FeCl3 ratio, pH (of synthesising environment), ethylene glycol dose, and temperature of 1:0.75, 1:1, 12, 6 mL/100 mL, and 95 °C, respectively. Then, the new adsorbent was applied to treat water having 50 mg/L of TC in batch experiments, taking into account the effects of the contact time (0–180 min), pH of water (2–12), the dose of adsorbent (0.05–0.5 g), and agitation speed (0–250 rpm). The results obtained proved the engineered adsorbent can remove as much as 90% of the TC (adsorption capacity of 21.96 mg/g) within 180 min at an initial pH, adsorbent dosage, and agitation speed of 7, 0.3 g per 50 mL, and 200 rpm, respectively. It was also found that the pseudo-second-order model describes the kinetic measurements better than the pseudo-first-order model, which indicates that the TC molecules have been bonded with the prepared sorbent through chemical forces. Furthermore, the intra-particle diffusion model results demonstrated that the diffusion mechanism plays a significant role in TC adsorption; however, it was not the predominant one. Finally, the outcomes of the characterisation analysis proved that the newly formed layer on the quartz sand substantially contributed to the removal of the TC from the contaminated water.

2 January 2025 in Geotechnical and Geological Engineering
Verified
Journal Article
Open access
PDF file
FAFadhil Kamil Idan Al-Darraji
Fadhil Kamil Idan Al-Darraji
Monower SadiqueMonower Sadique
Monower Sadique
ZYZelong Yu
Zelong Yu
Ali ShubbarAli Shubbar
Ali Shubbar
DCDr Tina Marolt Cebasek
Dr Tina Marolt Cebasek
Recent advancements in foundation engineering have introduced composite piles, specifically the Confined Concrete-Filled Aluminum Tube (CCFAT) pile system, which can effectively support both vertical and lateral loads. However, the behavior of composite piles under combined loading conditions remains largely unexplored. This research investigates the performance of CCFAT pile groups installed in loose sand and subjected to combined loads. Experimental studies focused on 1 × 2 and 2 × 2 CCFAT configurations with varying slenderness ratios (Lm/d) of 10, 15, and 20. These experiments were used to validate Finite Element (FE) models. Numerical simulations were then conducted for new configurations, including 2 × 3 and 3 × 3 CCFAT piles, to gather additional performance data. Results indicated that the ultimate vertical capacity of the CCFAT pile groups increased with the Lm/d ratio. Under combined loading, the ultimate lateral capacity also improved with higher vertical loads for a given Lm/d ratio. The laboratory findings showed a near-linear relationship between both ultimate vertical and lateral capacities and the Lm/d ratio. Failure mechanisms identified through numerical simulations revealed that CCFAT pile groups experienced punching shear failure, indicative of confined deep flow behavior. Under specific vertical loads, lateral loading resulted in soil compression on the right and tension on the left, causing heave and depression zones, significant soil yielding, and wedge formations. Sensitivity analyses highlighted that, for pure lateral loads, the internal friction angle and Young’s modulus significantly affect CCFAT pile group behavior, while under vertical loads at 80% of ultimate vertical load (Puv), the internal friction and dilatancy angles have a greater impact on lateral capacity than other parameters. Based on these findings, new expressions were proposed to calculate the ultimate lateral load (Pulv) for CCFAT pile groups under combined loading conditions, integrating the identified influencing factors.