Abouelnadar Salem

Mr. Abouelnadar Salem

M.Sc., Ph.D. candidate at Huazhong Agricultural University, Wuhan 430070, China, Assistant Researcher at Desert Research Center, Cairo 11753, Egypt, research interest: Soil Conservation and Agricultural Machinery, Email: abouelnadar@webmail.hzau.edu.cn
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 March 2021 in Agriculture
Verified
Journal Article
Open access
PDF file
XZXiantao Zha
Xiantao Zha
GZGuozhong Zhang
Guozhong Zhang
YHYuhang Han
Yuhang Han
Abouelnadar SalemAbouelnadar Salem
Abouelnadar Salem
JFJianwei Fu
Jianwei Fu
YZYong Zhou
Yong Zhou
In order to solve the problem where the amount of screw fertilizer distributor can only be adjusted by rotating speed and poor fertilization uniformity at low rotational speeds, a blocking wheel-type screw fertilizer distributor was designed. Single factor and L9(34) orthogonal simulation tests based on EDEM software were carried out to optimize the distributor variables at a speed of 20 r/min. The bench verification test was built under the same conditions as the simulation tests to verify the results of the simulation. Finally, the bench performance tests were carried out to evaluate distributor performance. The results of simulation tests revealed that the minimum coefficient of variation of fertilization uniformity (CVFU) was 19.27%, with the structural parameter combination of the inner diameter (17 mm), pitch (45 mm), outlet distance (40 mm), and number of screw heads (1). The verification test results showed that the changing trend and values of the CVFU were almost the same as the simulation tests. The results of the performance test revealed that when the opening width of the blocking wheel was 10–30 mm and the rotation speed was 20–60 r/min, the amount of fertilizer per lap (FAPL) was in the range of 27.74–38.15 g/r; the maximum CVFU and the coefficient of variation of fertilization stability (CVFS) were 29.43% and 2.18%, respectively, which met the requirements of the industry standard. This research provides a good reference for optimizing the screw fertilizer distribution and for researchers in the field of precision fertilization.

20 January 2021 in Agriculture
Verified
Journal Article
Open access
PDF file
MAMohamed Anwer Abdeen
Mohamed Anwer Abdeen
Abouelnadar SalemAbouelnadar Salem
Abouelnadar Salem
GZGuozhong Zhang
Guozhong Zhang
Combine harvesters are widely used worldwide in harvesting many crops, and they have many functions that cover the entire harvesting process, such as cutting, threshing, separating, and cleaning. The threshing drum is the core working device of the combine harvester and plays an influential role in rice threshing efficiency, threshing power requirement, and seed loss. In this study, two structures of rice threshers (conical-shaped and cylindrical-shaped) were tested and evaluated for performance under different thresher rotating speeds of 1100, 1300, and 1500 rpm and different feeding rates of 0.8, 1.1, and 1.4 kg/s. The experiment was designed using the Taguchi method, and the obtained results were evaluated using the same technique. The thresher structure and operating parameters were assessed and optimized with reference to threshing efficiency, required power, and productivity. The obtained results revealed that increasing thresher rotating speed and the feeding rate positively related to threshing efficiency, power, and productivity. The highest efficiency of 98% and the maximum productivity of 0.64 kg/s were obtained using the conical-shaped thresher under a 1500 rpm rotating speed and a feed rate of 1.4 kg/s, whereas the minimum required power of 5.45 kW was obtained using the conical thresher under a rotating speed of 1100 rpm and a feed rate of 0.8 kg/s.

25 September 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Abouelnadar SalemAbouelnadar Salem
Abouelnadar Salem
HWHongchang Wang
Hongchang Wang
YGYuan Gao
Yuan Gao
XZXiantao Zha
Xiantao Zha
MAMohamed Anwer Abdeen
Mohamed Anwer Abdeen
GZGuozhong Zhang
Guozhong Zhang
Soil adhesion is a major problem for agricultural machinery, especially in sticky soils within the plastic range. One promising and practical way to minimize soil–tool adhesion is to modify the surface geometry to one inspired by soil-burrowing animals. In this study, 27 domed discs were fabricated according to an L27 (33) Taguchi orthogonal array and tested to determine the optimal dimensions of domed surfaces to reduce drag force. The optimized domed disc was tested in a soil bin under different soil conditions (soil texture: silty loam and sandy clay loam; soil moisture content: 23%, 30%, and 37%). All trials included a flat disc (without a dome pattern) as a control. The optimal dimensions of domed surfaces to generate the lowest possible drag force under the present experimental conditions were explored based on signal-to-noise ratio analysis. The optimal levels of control parameters were found at a surface coverage ratio of 60%, dome height of 5 mm, and dome base diameter of 20 mm. Statistics revealed that the dome height-to-diameter ratio and disc coverage ratio are crucial factors that influence the drag force of domed surfaces. In contrast, the dome base diameter had a limited influence on drag force. In all treatments, the drag force of the optimized domed disc was less than that of the flat disc (by about 9% to 25%, according to soil conditions). Accordingly, it can be concluded that adequately designed domed surfaces could significantly reduce the drag force in sticky soil compared to their flat counterparts.

8 May 2025 in Agriengineering
Verified
Journal Article
Open access
PDF file
XLXianjie Li
Xianjie Li
Abouelnadar SalemAbouelnadar Salem
Abouelnadar Salem
YLYi Liu
Yi Liu
BSBin Sun
Bin Sun
GSGuanzheng Shi
Guanzheng Shi
ZCZengcun Chang
Zengcun Chang
To address the inefficiency and high cost of manual potato pickup in segmented harvesting, a dual-disc potato pickup and harvesting device was designed. The device utilizes counter-rotating dual discs to gather and preliminarily lift the potato–soil mixture, and combines it with an elevator chain to achieve potato–soil separation and transportation. Based on Hertz’s collision theory, the impact of disc rotational speed on potato damage was analyzed, establishing a maximum speed limit (≤62.56 r/min). Through kinematic analysis, the disc inclination angle (12–24°) and operational parameters were optimized. Through coupled EDEM-RecurDyn simulations and Box–Behnken experimental design, the optimal parameter combination was determined with the potato loss rate and potato damage rate as evaluation indices: disc rotational speed of 50 r/min, disc inclination angle of 16°, and machine forward speed of 0.6 m/s. Field validation tests revealed that the potato loss rate and potato damage rate were 1.53% and 2.45%, respectively, meeting the requirements of the DB64/T 1795-2021 standard. The research findings demonstrate that this device can efficiently replace manual potato picking, providing a reliable solution for the mechanized harvesting of potatoes.

1 January 2021 in International Journal of Agricultural and Biological Engineering
Verified
Journal Article
Open access
PDF file
Abouelnadar SalemAbouelnadar Salem
Abouelnadar Salem
GZGuozhong Zhang
Guozhong Zhang
MAMohamed Anwer Abdeen
Mohamed Anwer Abdeen
HWHongchang Wang
Hongchang Wang
YGYuan Gao
Yuan Gao
Several studies highlighted that the surface shape modifications which are inspired by the soil-burrowing animals have positively impacted the soil-tool adhesion; however, it is still unclear what the optimum dimensions of the domed surface are for minimizing soil-tool adhesion. In this study, twenty-seven domed discs were created according to Taguchi orthogonal array L27(33) to determine the optimum dimensions of the domed surface that minimize normal adhesion force and disc sinkage simultaneously, as well as comparing the effect of the optimized domed disc versus the flat disc on the normal adhesion force under different soil conditions. The results revealed that disc coverage ratio and dome height to diameter ratio are essential to design parameters that influence the normal adhesion force of discs. According to the signal-to-noise ratio analysis, it was observed that the combination of 60% disc coverage ratio, 25% dome height to diameter ratio, and 10 mm dome base diameter was found to be the most appropriate for the well-balanced improvement of both normal adhesion force and disc sinkage simultaneously. In all treatments, the optimized domed disc produced less normal adhesion force than the flat disc (about 7%-18%, according to soil condition). It can be concluded that properly designed domed surfaces can significantly reduce the normal adhesion force when compared to flat surfaces. Keywords: biomimetics, paddy soil, normal adhesion, disc sinkage, Taguchi method DOI: 10.25165/j.ijabe.20221501.6147 Citation: Salem A E, Zhang G Z, Abdeen M A M, Wang H C, Gao Y. Optimizing the adhesion of soil-touching parts based on biomimetic concepts using the Taguchi method. Int J Agric & Biol Eng, 2022; 15(1): 147–154.

2 March 2026 in Agriculture
Verified
Journal Article
Open access
PDF file
SZSun Zhipeng
Sun Zhipeng
XHXiaoning He
Xiaoning He
Abouelnadar SalemAbouelnadar Salem
Abouelnadar Salem
NXNan Xu
Nan Xu
ZGZenghui Gao
Zenghui Gao
RZRui Zhang
Rui Zhang
This study presents a novel pneumatic seed-metering device for precision soybean breeding, engineered to deliver two seeds per hill with high operational reliability. Its design features a compartmentalized structure and an integrated seed-clearing mechanism, explicitly addressing the key limitations of conventional seeders, such as low automation levels and intervarietal contamination during seed switching. The seed-metering and clearing processes were analyzed using coupled discrete element method–computational fluid dynamics (DEM–CFD) simulations. The exploratory DEM–CFD analysis identified distinct operational thresholds for seeding failures: miss-seeding occurred at disc rotational speeds exceeding 2.55 rad s−1, while multiple-seeding issues were frequent at applied vacuum pressures above 5.6 kPa. Following this, a Central Composite Design (CCD) experiment was conducted in a controlled laboratory setting to examine the effects of operational speed and vacuum pressure on seeding quality indices. A multi-objective numerical optimization identified an optimal operational compromise with a seed-metering disc speed of 2.65 rad s−1 (approximately 1.82 km h−1) and an applied negative pressure of 5.80 kPa. This operating point effectively balances the competing failure modes of multiple seeding and miss-seeding, resulting in rates of 2.95% and 0.85% respectively. Field validation in saline–alkali soil conditions confirmed the device’s high precision, with actual multiple and miss-seeding rates maintained below 2% and 0.5%, respectively. Overall, this device significantly enhances seeding efficiency and operational reliability, providing a practical and effective solution for high-throughput soybean breeding programmes.