Currently, the spaceborne synthetic aperture radar (SAR) system transmits a great deal of data to the ground processing station and generates massive images daily, only a tiny fraction of which contains radio frequency interference (RFI). However, most of the existing RFI detection methods are based on the prior conditions in which the known image contains interference. In fact, it is difficult to learn whether SAR images contain RFIs without prescreening, so it is of great significance to the rapid and real-time screening and detection of RFI in SAR images. This article proposes a method to screen and detect RFI from massive SAR images simultaneously. 1) We construct an approximate RFI-free background image by using the preprocessed time-series SAR images acquired in the past. 2) We generate difference images based on the image change detection method and analyze them by using an adaptive threshold, then calculate the entropy of all difference images to complete the preliminary screening of the RFI-containing). According to the preliminary results, we remove the RFI-containing parts; after reconstructing the background, we repeat step 2 with the images to be detected and obtain the final screening and detection results. Massive experimental results based on Sentinel-1 images validate the performance of the proposed method.
Synthetic aperture radar (SAR), as an active microwave sensor, can inevitably receive radio frequency interference (RFI) generated by various electromagnetic equipment. When the SAR system receives RFI, it will affect SAR imaging and limit the application of SAR images. As a kind of RFI mitigation method, notch filtering method is a classical method with high efficiency and robust performance. However, the notch filtering methods pay no attention to the protection of useful signals. This paper proposed a modified 2-D notch filter based on image segmentation for RFI mitigation with signal-protected capability. (1) The adaptive gamma correction (AGC) approach was utilized to enhance the SAR image with RFI in the range-frequency and azimuth-time domain. (2) The modified selective binary and Gaussian filtering regularized level set (SBGFRLS) model was utilized to further process the image after AGC to accurately extract the contour of the useful signals with interference, which is more conducive to protecting the useful signals without interference. (3) The Generalized Singular Value Thresholding (GSVT) based low-rank sparse decomposition (LRSD) model was utilized to separate the RFI signals and the useful signals. Then, the useful signals were restored to the raw data. The simulation experiments and measured data experiments show that the proposed method can effectively mitigate RFI and protect the useful signals whether there are RFI with single source or multiple sources.
19 December 2023 in IEEE Transactions on Geoscience and Remote Sensing
Radio frequency interference (RFI) seriously affects the processing of synthetic aperture radar (SAR) data and the interpretation of images. The accuracy of RFI detection, which is the first step of RFI suppression, directly affects the follow-up work. However, the implementations of existing RFI detection methods mostly rely on the assumption that the flatness of the range spectrum will be destroyed by strong RFI, making these methods ineffective in the face of weak energy RFI. Furthermore, in these methods, the problem of accurately localizing the RFI is rarely considered, resulting in a considerable loss of imaging signals during subsequent RFI suppression. In this manuscript, a method of time-varying RFI detection and localization is proposed with two steps that are based on the flatness and symmetry of the SAR range spectrum. This method can effectively avoid missed detection and accurately find the location of RFI with weaker energy in an echo. The proposed method first detects the existence of RFI along the azimuth direction. Moreover, the proposed composite index is used. The position of the RFI is then found along the range direction, and the log ratio operator and eigenvalue decomposition are used. Experimental results on both simulated and raw data obtained by airborne and spaceborne SAR validate the advantages of the suggested method in detecting and locating weak energy RFI.
As an open system, synthetic aperture radar (SAR) inevitably receives radio frequency interference (RFI) generated by electromagnetic equipment in the same band. The existence of RFI seriously affects SAR signal processing and image interpretation. In recent years, many algorithms and models related to RFI mitigation have been proposed. However, most of that focus on effectively mitigating the RFI is insufficient to protect the useful signals. This article proposes a mitigation method of RFI with a signal-protected capability. (1) The kurtosis coefficient is used to detect RFI pulse-by-pulse, and the echoes containing RFI are stored in matrix form. (2) The preliminary extraction of RFI is complete by low-rank sparse decomposition of the echo matrix containing RFI. (3) For the secondary separation of RFI, the accurate position of RFI in the preliminary extraction results is located by the fuzzy C-means clustering; then, we separate the RFI and the remaining useful signals again and reconstruct the useful signals to complete the mitigation work. The proposed method can further protect useful signals while effectively removing interference through the secondary separation of RFI. Experimental results based on simulated and measured data verify the performance and potential of the proposed method.
16 October 2023 in IEEE Geoscience and Remote Sensing Letters
Synthetic Aperture Radar (SAR) images of Sentinel-1 (S-1) in Interferometric Wide (IW) swath mode, which are widely used for land and ocean services, but are affected by severe radio frequency interference (RFI). Single Look Complex (SLC) data containing phase and amplitude information is the most popular product type for SAR applications. The sub-band spectral cancellation (SSC) method extracts and suppresses RFI in SLC images through making a subtraction among different sub-images, which is efficient and strong enough to be applied to projects based on the hypothesis that the range spectrum is particularly symmetric. However, through the theoretical analysis of the imaging algorithm for generating SLC data in S-1 IW mode, it is found that the phase compensation step in the azimuth post-processing destroys the symmetry of the spectrum and does not meet the basis for the application of the SSC method, resulting in poor RFI mitigation performance. Based on this discovery, inverse phase compensation is first performed on the RFI-contaminated SLC image to restore the spectrum symmetry. The second step is the sub-band division and sub-image energy cancellation. This method effectively protects useful signals while suppressing RFI, which is significantly essential for the further application of S-1 SLC images. The availability of the method has been proved by simulated and measured experiments.