Huating Chen

Dr. Huating Chen

Beijing University of Technology, Beijing, China
orcid

Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 June 2022 in Materials
Verified
Journal Article
Open access
PDF file
HCHuating Chen
Huating Chen
ZSZhenyu Sun
Zhenyu Sun
ZZZefeng Zhong
Zefeng Zhong
YHYan Huang
Yan Huang
Concrete tensile properties usually govern the fatigue cracking of structural components such as bridge decks under repetitive loading. A fatigue life reliability analysis of commonly used ordinary cement concrete is desirable. As fatigue is affected by many interlinked factors whose effect is nonlinear, a unanimous consensus on the quantitative measurement of these factors has not yet been achieved. Benefiting from its unique self-learning ability and strong generalization capability, the Bayesian regularized backpropagation neural network (BR-BPNN) was proposed to predict concrete behavior in tensile fatigue. A total of 432 effective data points were collected from the literature, and an optimal model was determined with various combinations of network parameters. The average relative impact value (ARIV) was constructed to evaluate the correlation between fatigue life and its influencing parameters (maximum stress level Smax, stress ratio R, static strength f, failure probability P). ARIV results were compared with other factor assessment methods (weight equation and multiple linear regression analyses). Using BR-BPNN, S-N curves were obtained for the combinations of R = 0.1, 0.2, 0.5; f = 5, 6, 7 MPa; P = 5%, 50%, 95%. The tensile fatigue results under different testing conditions were finally compared for compatibility. It was concluded that Smax had the most significant negative effect on fatigue life; and the degree of influence of R, P, and f, which positively correlated with fatigue life, decreased successively. ARIV was confirmed as a feasible way to analyze the importance of parameters and could be recommended for future applications. It was found that the predicted logarithmic fatigue life agreed well with the test results and conventional data fitting curves, indicating the reliability of the BR-BPNN model in predicting concrete tensile fatigue behavior. These probabilistic fatigue curves could provide insights into fatigue test program design and fatigue evaluation. Since the overall correlation coefficient between the prediction and experimental results reached 0.99, the experimental results of plain concrete under flexural tension, axial tension, and splitting tension could be combined in future analyses. Besides utilizing the valuable fatigue test data available in the literature, this work provided evidence of the successful application of BR-BPNN on concrete fatigue prediction. Although a more accurate and comprehensive method was derived in the current study, caution should still be exercised when utilizing this method.

28 September 2023 in Materials
Verified
Journal Article
Open access
PDF file
HCHuating Chen
Huating Chen
ZSZhenyu Sun
Zhenyu Sun
XZXianwei Zhang
Xianwei Zhang
JFJinhong Fan
Jinhong Fan
Many bridge structural components are subjected to repetitive vehicle load and temperature gradient action. The resulting cyclic tensile stresses within the structures could cause premature fatigue failure of concrete, dramatically impairing structural components’ durability and sustainability. Although substantial knowledge of fatigue properties on low-strength pavement concrete and high-strength structural concrete has been obtained, research on the most widely used normal-grade ordinary concrete in bridge engineering is still ongoing. Therefore, a four-point bending fatigue test of 97 C50 concrete specimens under a constant amplitude sinusoidal wave was conducted in the laboratory, the flexural fatigue behavior of plain and reinforced concrete specimens was studied, and the cyclic deformation evolution of concrete under fatigue loading was obtained. The empirical fatigue S-N equations of concrete with a failure probability p of 0.1~0.5 were derived through statistical analysis of the test results. The fatigue life of the tested specimens exhibited a two-parameter Weibull distribution. In addition to the maximum stress level Smax, the stress ratio R is also a key factor affecting the flexural fatigue life of concrete N. The semi-logarithmic and logarithmic equations were almost identical at the tested stress levels, the latter predicting longer fatigue life for Smax < 0.70. The restraining effect from steel reinforcement slightly lengthened the concrete’s fatigue cracking initiation life. The insight into concrete flexural fatigue properties from this study not only contributes to a better understanding of structural concrete, but also provides a basis for the practical evaluation of concrete or composite bridge decks.

27 September 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
HCHuating Chen
Huating Chen
ZSZhenyu Sun
Zhenyu Sun
XZXianwei Zhang
Xianwei Zhang
WZWenxue Zhang
Wenxue Zhang
Concrete structures such as bridge decks and road pavements are subjected to repetitive loading and are susceptible to fatigue failure. A simplified stress–strain analysis method that can simulate concrete behavior with a sound physical basis, acceptable prediction precision, and reasonable computation cost is urgently needed to address the critical issue of high-cycle fatigue in structural engineering. An equivalent fatigue constitutive model at discrete loading cycles incorporated into the concrete damaged plasticity model (CDPM) in Abaqus is proposed based on fatigue damage evolution. A damage variable is constructed from maximum fatigue strains, and fatigue damage evolution is described by a general equation whose parameters’ physical meaning and value range are identified. With the descending branch of the monotonic stress–strain curve as the envelope of fatigue residual strength and fatigue damage evolution equation as shape function, fatigue residual strength, residual stiffness, and residual strain are calculated. The equivalent fatigue constitutive model is validated through comparison with experimental data, where satisfactory simulation results were obtained for axial compression and flexural tension fatigue. The model’s novelty lies in integrating the fatigue damage evolution equation with CDPM, explicitly explaining performance degradation caused by fatigue damage. The proposed model could accommodate various forms of concrete constitution and fatigue stress states and has a broad application prospect for fatigue analysis of concrete structures.

4 November 2024 in Materials
Verified
Journal Article
Open access
PDF file
HCHuating Chen
Huating Chen
一卓一凡 卓
一凡 卓
DLDewang Li
Dewang Li
YHYan Huang
Yan Huang
Fracture tests are a necessary means to obtain the fracture properties of concrete, which are crucial material parameters for the fracture analysis of concrete structures. This study aims to fill the gap of insufficient test results on the fracture toughness of widely used ordinary C40~C60 concrete. A three-point bending fracture test was conducted on 28 plain concrete and 6 reinforced concrete single-edge notched beam specimens with various depths of prefabricated notches. The results are reported, including the failure pattern, crack initiation load, peak load, and complete load versus crack mouth opening displacement curves. The cracking load showed significant variation due to differences in notch prefabrication and aggregate distribution, while the peak load decreased nonlinearly with an increase in the notch-to-height ratio. The reinforced concrete beams showed a significantly higher peak load than the plain concrete beams, attributed to the restraint of steel reinforcement, but the measured cracking load was comparable. A compliance versus notch-to-height ratio curve was derived for future applications, such as estimating crack length in crack growth rate tests. Finally, fracture toughness was determined based on the double-K fracture model and the boundary effect model. The average fracture toughness value for C50 concrete from this study was 2.0 MPa·m, slightly smaller than that of lower-strength concrete, indicating the strength and ductility dependency of concrete fracture toughness. The fracture toughness calculated from the two models is consistent, and both methods employ a closed-form solution and are practical to use. The derived fracture toughness was insensitive to the discrete parameters in the boundary effect model. The insights gained from this study significantly contribute to our understanding of the fracture toughness properties of ordinary structural concrete, highlighting its potential to shape future studies and applications in the field.

17 May 2022 in Preprints.org
Verified
Preprint
Open access
PDF file
HCHuating Chen
Huating Chen
ZSZhenyu Sun
Zhenyu Sun
ZZZefeng Zhong
Zefeng Zhong
YHYan Huang
Yan Huang
The fatigue life of concrete is affected by many interwoven factors whose effect is nonlinear. Be-cause of its unique self-learning ability and strong generalization capability, the Bayesian regu-larized backpropagation neural network (BR-BPNN) is proposed to predict concrete behavior in tensile fatigue. The optimal model was determined through various combinations of network parameters. The average relative impact value (ARIV) was constructed to evaluate the correla-tion between fatigue life and its influencing parameters (maximum stress level Smax, stress ratio R, static strength f, failure probability P). ARIV results were also compared with other factor as-sessment methods (weight equation and multiple linear regression analyses). Using BR-BPNN, S-N curves were then obtained for the combinations of R=0.1, 0.2, 0.5; f=5, 6, 7MPa; P=5%, 50%, 95%. The tensile fatigue results under different testing conditions were finally compared for compatibility. It was concluded that Smax has the most significant negative effect on fatigue life; the degree of influence of R, P, and f, which positively correlate with fatigue life, decreases suc-cessively. ARIV is confirmed as a feasible way to analyze the importance of parameters and could be recommended for future applications. The tensile fatigue performance of plain concrete under different stress states (flexural tension, axial tension, splitting tension) does not differ sig-nificantly. Besides utilizing the valuable fatigue test data scattered in the literature, insights gained from this work could provide a reference for subsequent fatigue test program design and fatigue evaluation.

1 October 2022 in Frontiers of Structural and Civil Engineering
Verified
Journal Article
Closed access
PDF file
HCHuating Chen
Huating Chen
XZXianwei Zhan
Xianwei Zhan
XZXiufu Zhu
Xiufu Zhu
WZWenxue Zhang
Wenxue Zhang