Inigo Sanz-Pena

Dr. Inigo Sanz-Pena

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 June 2023 in IEEE Robotics and Automation Letters
Verified
Journal Article
Closed access
ISInigo Sanz-Pena
Inigo Sanz-Pena
HJHyeongkeun Jeong
Hyeongkeun Jeong
MKMyunghee Kim
Myunghee Kim
Wearable assistive robots can potentially improve the gait of individuals with reduced mobility. To address each individual's unique needs, personalized robots are necessary. In addition, robots equipped with portable systems are required to ensure their practical use in clinical and outdoor settings. We developed and evaluated a modular robotic ankle-foot orthosis (AFO) with two degrees of freedom and a portable actuation system, providing ankle plantarflexion and in/eversion assistance. The performance was evaluated via benchtop testing and human subject experiments. The benchtop testing demonstrated that the device could deliver 40 Nm of plantarflexion torque and 16 Nm of in/eversion torque, with rise times of 70 ms during plantarflexion, 84 ms during inversion, and 77 ms during eversion. The torque control bandwidth was greater than 13 Hz in plantarflexion and in/eversion. When a human subject used the device for squat assistance, the device presented its ability to track the desired torque trajectory with a maximum mean RMS error of 2.9 ± 1.2 Nm for plantarflexion assistance and 0.7 ± 0.5 Nm for in/eversion assistance. This study shows the potential of the proposed modular AFO, fabricated solely via additive manufacturing and utilizing an off-board portable actuation system. The proposed device can personalize ankle exoskeletons and examine in/eversion assistance effects for individuals with reduced mobility.

1 June 2019 in The Journal of Arthroplasty
Verified
Journal Article
Closed access
ISInigo Sanz-Pena
Inigo Sanz-Pena
GZGabriela E. Zapata
Gabriela E. Zapata
MVMatthias A. Verstraete
Matthias A. Verstraete
PMPatrick A. Meere
Patrick A. Meere
PWPeter S. Walker
Peter S. Walker

1 March 2019 in Journal of Biomechanics
Verified
Journal Article
Closed access
GZGabriela Zapata
Gabriela Zapata
ISInigo Sanz-Pena
Inigo Sanz-Pena
MVMatthias Verstraete
Matthias Verstraete
PWPeter S. Walker
Peter S. Walker

12 August 2021 in IEEE Transactions on Human-Machine Systems
Verified
Journal Article
Closed access
ISInigo Sanz-Pena
Inigo Sanz-Pena
Julio BlancoJulio Blanco
Julio Blanco
JKJoo H. Kim
Joo H. Kim
Computer interfaces with visual biofeedback (BF) capabilities in robot-assisted gait training applications can help design subject-specific therapies, define tasks based on the patient's condition, and increase the training outcomes. This study presents the use of an open-source real-time computer interface as a subject-specific visual BF and monitoring tool during gait. The interface is used in combination with a low-cost Wearable integrated Sensor System for Data Acquisition (WiSSDA), which consists of a 3-D printed lower extremity exoskeleton equipped with rotary encoders and pressure-sensitive insoles that measure biometric data during the gait cycle. The system obtains the lower extremities’ joint kinematics in the sagittal plane and estimates the vertical component of the foot contact forces and the foot center of pressure. Experimental tests were performed to evaluate different gait parameters using the computer interface as visual BF to guide the subject with reference boundaries of kinematic and kinetic parameters as target trajectories. The results were used to evaluate the interface's performance for specific gait tasks. The results demonstrated the capabilities of the computer interface combined with WiSSDA for robot-assisted gait training applications using BF; providing an open-source, portable, and ambulatory device that can be used in outdoor environments. The proposed system can help bring gait rehabilitation outside the laboratory environment, eliminating the need for stationary equipment.

20 February 2023 in Frontiers in Bioengineering and Biotechnology
Verified
Journal Article
Open access
NKNupur Kohli
Nupur Kohli
KTKonstantinos Theodoridis
Konstantinos Theodoridis
THThomas A. G. Hall
Thomas A. G. Hall
ISInigo Sanz-Pena
Inigo Sanz-Pena
DGDavid C. A. Gaboriau
David C. A. Gaboriau
RARichard Jan van Arkel
Richard Jan van Arkel
Introduction: Preclinical assessment of bone remodelling onto, into or around novel implant technologies is underpinned by a large live animal testing burden. The aim of this study was to explore whether a lab-based bioreactor model could provide similar insight.Method: Twelve ex vivo trabecular bone cylinders were extracted from porcine femora and were implanted with additively manufactured stochastic porous titanium implants. Half were cultured dynamically, in a bioreactor with continuous fluid flow and daily cyclic loading, and half in static well plates. Tissue ongrowth, ingrowth and remodelling around the implants were evaluated with imaging and mechanical testing.Results: For both culture conditions, scanning electron microscopy (SEM) revealed bone ongrowth; widefield, backscatter SEM, micro computed tomography scanning, and histology revealed mineralisation inside the implant pores; and histology revealed woven bone formation and bone resorption around the implant. The imaging evidence of this tissue ongrowth, ingrowth and remodelling around the implant was greater for the dynamically cultured samples, and the mechanical testing revealed that the dynamically cultured samples had approximately three times greater push-through fixation strength (p < 0.05).Discussion:Ex vivo bone models enable the analysis of tissue remodelling onto, into and around porous implants in the lab. While static culture conditions exhibited some characteristics of bony adaptation to implantation, simulating physiological conditions with a bioreactor led to an accelerated response.

12 June 2023 in IEEE Sensors Journal
Verified
Journal Article
Closed access
ISInigo Sanz-Pena
Inigo Sanz-Pena
MHMatthew Hopkins
Matthew Hopkins
NRNoelia Rubio
Noelia Rubio
HXHang Xu
Hang Xu
Disabilities impacting mobility are a global concern requiring gait rehabilitation, where monitoring foot pressure distribution is fundamental. Wearable systems provide an alternative to stationary equipment eliminating space limitations. However, wearable sensors present challenges in the calibration, sensitivity, and human-sensor interface, requiring application-specific sensors. This study aimed to develop wearable sensors where the structural and material properties can characterise the sensitivity and range of measurement during the design phase. We developed wearable piezoresistive sensors using additive manufacturing to create mechanical metamaterials with embedded pressure-sensing capabilities. Three structural designs were developed for different measuring ranges (0 – 50 N, 0 – 100 N, and 0 – 150 N) using body-centred cubic lattices constructed via pyramid unit cells. In addition, two graphene infusion processes were evaluated. We analysed the influence of structural dimensions and the graphene infusion process on the piezoresistive response of the sensors. The measuring range was affected mainly by tuneable structural dimensions, while the infusion process influenced the piezoresistive sensitivity and the linear response. The outcomes in characterising the piezoresistive sensors based on structural and material properties could allow the development of wearables with embedded pressure sensing with a predictive response solely based on design parameters using additive manufacturing and graphene inks.