Gabriela Ioana Stan

Ms. Gabriela Ioana Stan

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 October 2024 in Processes
Verified
Journal Article
Open access
PDF file
Cristian Nicolae EparuCristian Nicolae Eparu
Cristian Nicolae Eparu
PAPrundurel Alina
Prundurel Alina
Rami DOUKEHRami DOUKEH
Rami DOUKEH
DSDoru Bogdan Stoica
Doru Bogdan Stoica
IGIuliana V Ghetiu
Iuliana V Ghetiu
RRRadulescu Renata
Radulescu Renata
This study focuses on optimizing the storage capacity of an underground natural gas storage facility through numerical modeling and simulation techniques. The reservoir, characterized by an elongated dome structure, was discretized into approximately 16,000 cells. Simulations were conducted using key parameters such as permeability (10–70 mD) and porosity (12–26%) to assess the dynamics of gas injection and pressure distribution. The model incorporated core and petrophysical data to accurately represent the reservoir’s behavior. By integrating new wells in areas with storage deficits, the model demonstrated improvements in storage efficiency and pressure uniformity. The introduction of additional wells led to a significant increase in storage volume from 380 to 512 million Sm³ and optimized the injection process by reducing the storage period by 25%. The study concludes that reservoir performance can be enhanced with targeted well placement and customized flow rates, resulting in both increased storage capacity and economic benefits.

6 May 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
IPIon Pana
Ion Pana
IGIuliana V Ghetiu
Iuliana V Ghetiu
GSGabriela Ioana Stan
Gabriela Ioana Stan
FDFlorinel Dinu
Florinel Dinu
Gheorghe BranoiuGheorghe Branoiu
Gheorghe Branoiu
Silvian SudituSilvian Suditu
Silvian Suditu
This paper presents the application of the hydraulic fracturing method in Romania, exemplified by three case studies. In the current conditions in which the oil and gas prices have risen above the limit of affordability, Romania, one of the few producers in Europe, is trying to solve the problems that have arisen through various methods, which are as follows: offshore drilling, gas underground storage, field rehabilitation and increasing the efficiency of applied technologies. The application of hydraulic fracturing is a safe process, with minimal environmental implications and certain economic benefits. The important thing is to have the necessary energy now, in the desired quantities and with minimal expenses. The authors sought to include key issues in the application of this technology in Romania. The scientific literature on this topic has helped us to interpret the data from the field in difficult situations and were a real support in our activity. We need to provide energy support and energy security and we do not have a lot of resources. Under these conditions, the reactivation of existing deposits and the extension of the production period are essential elements. The authors designed the fracturing technologies. The data corresponding to the geological structure obtained through geological investigations, and the database corresponding to the analyzed wells from the company’s data archive were the elements used in the simulation programs. Thus, the values in the fracturing area about pore fluid permeability, layers stress, Young’s modulus of the structure and fracture toughness were established. The fluids for the fracturing operation and the proppant were chosen for each case, in accordance with the geological recommendations, by our team. Testing of the fracturing technologies for different variants of the pumping program was carried out using the Fracpro program. The variants presented in this article are some of the best solutions found. We used the step-by-step flow test to find the fracture expansion pressure and closing pressure for each case. The mini-frac program established corrections to the designed technologies during the operation quickly and with reduced costs. The designed technologies allowed us to anticipate the necessary flows and pressure, leading to the choice of equipment. The fracture operations were performed only after the projected technologies anticipated the economic benefits covering the investments for the use of the equipment and the operation itself. Knowing the measured pressure of the well and the conditions of communication with the gas/oil reservoir, a simulation of the gas/oil production that could be obtained was made with the simulator. Two situations were exemplified for a gas well and an oil well. The field production results for a two-year interval are also indicated for these wells and a comparison was made with the estimated production.

18 December 2025 in Sustainability
Verified
Journal Article
Open access
PDF file
Silvian SudituSilvian Suditu
Silvian Suditu
Liviu DumitracheLiviu Dumitrache
Liviu Dumitrache
Gheorghe BranoiuGheorghe Branoiu
Gheorghe Branoiu
SDStefan Dragut
Stefan Dragut
Cristian Nicolae EparuCristian Nicolae Eparu
Cristian Nicolae Eparu
PAPrundurel Alina
Prundurel Alina
In the context of intensifying global efforts to mitigate climate change, methane emissions from the oil and gas sector have emerged as a critical environmental and regulatory challenge, given methane’s high global warming potential over short timeframes. This study investigates methane emissions from representative extraction and production of oil and gas facilities in Romania, focusing on fugitive emissions from wells and associated processing infrastructure. The research is grounded in the implementation of a comprehensive Leak Detection and Repair (LDAR) program, aligned with OGMP 2.0 standards, and utilizes advanced detection technologies such as Flame Ionization Detectors (FID), Optical Gas Imaging (OGI), and Quantitative Optical Gas Imaging (QOGI). A systematic inventory and screening of thousands of components enabled the precise identification and quantification of methane leaks, providing actionable data for maintenance and emissions management. The findings highlight that, although the proportion of leaking components is relatively low, cumulative emissions are significant, with block valves, connectors, and compressor shaft seals identified as the most frequent sources of major leaks. The study underscores the importance of rigorous preventive and corrective maintenance, rapid leak remediation, and the adoption of modern detection and continuous monitoring technologies. The approach developed offers a robust framework for regulatory compliance and supports the transition from inventory-based to measurement-based emissions reporting, in line with recent European regulations. Ultimately, effective methane management not only fulfills environmental obligations but also delivers economic benefits by reducing product losses and enhancing operational efficiency, contributing to the decarbonization and sustainability objectives of the energy sector.

7 January 2026 in Sustainable Chemistry
Verified
Journal Article
Open access
PDF file
Rami DOUKEHRami DOUKEH
Rami DOUKEH
Cristian Nicolae EparuCristian Nicolae Eparu
Cristian Nicolae Eparu
PAPrundurel Alina
Prundurel Alina
MTMihail Tudose
Mihail Tudose
Gheorghe BranoiuGheorghe Branoiu
Gheorghe Branoiu
DSDoru Bogdan Stoica
Doru Bogdan Stoica
Water-based drilling fluids (WBDFs) are widely used due to their economic and environmental advantages; however, shale hydration remains a major limitation. This study evaluates Fe2O3, CuO, ZnO, and MgO nanocrystalline metal oxides synthesized via co-precipitation as inorganic shale inhibitors for WBDFs. Comprehensive characterization confirmed phase-pure nanocrystalline oxides (17–38 nm) with high thermal stability. Performance tests revealed that MgO-based WBDF exhibited the lowest plastic viscosity (17 cP), the highest pH (≈10.0), and the strongest shale inhibition (6.1% swelling), while Fe2O3 provided superior filtration control (6.0 mL). CuO showed balanced rheology, whereas ZnO displayed comparatively weaker inhibition. Compared with commercial inhibitors (Amine NF and Glycol), MgO- and Fe2O3-based systems achieved comparable or improved performance with enhanced thermal and environmental robustness. These results demonstrate the potential of nanocrystalline metal oxides as sustainable additives for improving WBDF performance under high-pressure, high-temperature (HPHT) conditions.

8 July 2026 in Sustainability
Verified
Journal Article
Open access
PDF file
Neagu Daniela DoinaNeagu Daniela Doina
Neagu Daniela Doina
Liviu DumitracheLiviu Dumitrache
Liviu Dumitrache
Silvian SudituSilvian Suditu
Silvian Suditu
Gheorghe BranoiuGheorghe Branoiu
Gheorghe Branoiu
CTCHIS TIMUR-VASILE
CHIS TIMUR-VASILE
PSPetronela Cristina Simion
Petronela Cristina Simion
Carbon capture and storage (CCS) represents a critical technology for achieving climate neutrality targets, particularly for regions with significant industrial CO2 emissions. This study presents a comprehensive numerical simulation assessment of CO2 geological storage potential in the Sarmatian formations of the Getic Platform, Romania, located near the Turceni power plant—one of Europe’s largest thermal power facilities. Using ECLIPSE 300 compositional simulator with the CO2STORE option, we developed reservoir dynamic models incorporating geological properties, fluid characteristics, and pressure–volume–temperature (PVT) data specific to the Sarmatian aquifer system. Multiple injection scenarios were evaluated, including configurations with 3, 4, and 5 injection wells at varying inter-well distances (2000–10,000 m). The simulations covered a 20-year injection period followed by 300 years of monitoring. While previous assessments have provided static capacity estimates for Sarmatian formations, this study presents the first dynamic simulation-based evaluation of multi-well injection scenarios and long-term CO2 trapping behavior in this geological setting, directly linked to the Turceni Power Plant emissions profile. Results demonstrate that the study area (Zone V) can accommodate the target CO2 injection rate of 2.07 × 106 Sm3/day using five injection wells, with final reservoir pressure increasing only 7–9 bar above initial conditions, well below fracture pressure thresholds (~280 bar). Long-term simulations reveal favorable CO2 trapping behavior, with significant portions immobilized through residual and dissolution trapping mechanisms. The static storage capacity was estimated at 2.44 × 1014 kg CO2. These findings support the technical feasibility of large-scale CO2 storage in Romanian Sarmatian formations, providing quantitative evidence for CCS implementation strategies in the region.

15 October 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
GSGabriela Ioana Stan
Gabriela Ioana Stan
MTMihail Tudose
Mihail Tudose
PAPrundurel Alina
Prundurel Alina
Gheorghe BranoiuGheorghe Branoiu
Gheorghe Branoiu
Liviu DumitracheLiviu Dumitrache
Liviu Dumitrache
Rami DOUKEHRami DOUKEH
Rami DOUKEH
Water-based drilling fluids (WBMs) are widely applied in petroleum engineering due to their lower cost and reduced environmental impact compared to oil-based muds. However, their performance is severely limited in shale formations, where hydration and swelling of clay minerals lead to wellbore instability. In this study, two novel imidazoline-type inhibitors were synthesized from fatty acids: A-Lin (derived from linoleic acid) and A-Lau (derived from lauric acid). The synthesis involved amidation followed by cyclization, and the products were characterized using FTIR and TGA. Their performance as shale hydration inhibitors was evaluated in WBM formulations and compared with commercial additives (Amine NF and Glycol). The FTIR spectra confirmed successful imidazoline ring formation, while TGA demonstrated good thermal stability up to 150 °C, with A-Lin exhibiting superior resistance due to its unsaturated structure. Rheological tests showed that the synthesized additives reduced plastic viscosity, thereby improving cuttings transport efficiency. Swelling tests revealed that A-Lin achieved the lowest final swelling (6.3%), outperforming both commercial inhibitors and the saturated A-Lau analogue. Furthermore, A-Lin provided the best lubricity coefficient (0.148), reducing torque and drag during drilling. Overall, A-Lin demonstrated strong potential as an efficient, thermally stable, and environmentally compatible shale inhibitor for advanced WBM formulations. Compared to conventional inhibitors such as KCl, glycol, and amine-based additives, A-Lin uniquely combines superior swelling inhibition, enhanced lubricity, and good thermal stability, highlighting its novelty as an imidazoline derivative derived from renewable fatty acids