Liviu Dumitrache

Dr. Liviu Dumitrache

Petroleum-Gas University of Ploiești, Ploieşti, Prahova, Romania
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 February 2022
Verified
Conference Paper
Closed access
PDF file
Liviu DumitracheLiviu Dumitrache
Liviu Dumitrache
ARAlistair Roy
Alistair Roy
ABAnastasia Bird
Anastasia Bird
BGBaris Goktas
Baris Goktas
CSClaudia Sorgi
Claudia Sorgi
JAJonathan Abbott
Jonathan Abbott
The integration of data and discipline specific knowledge is a common challenge when attempting to optimize or accelerate an asset's recovery through hydraulic fracture stimulations. Any potential omission of data or understanding will increase uncertainty and a project's chance of failure. Therefore, when looking to optimize the production of a given asset, it is key to take a holistic approach that breaks down any technical and organisational barriers. This project couples the output of the different subsurface and stimulation disciplines to reduce the uncertainty associated with the production forecast of planned stimulation designs. The following paper presents the integrated approach for the Graben sector of UK's North Sea Clair oil field, largest oil field currently in Europe. Geophysicists, petrophysicists, and geologists generate a static model which is calibrated and validated by reservoir engineers through dynamic reservoir simulation. This model is used to identify the optimum exploitation scenario for a hydrocarbon reservoir and is assessed by the geomechanics engineer to deduce the subsurface stresses and strains to create a 3D mechanical earth model. The multidisciplinary validated representation is handed over to the stimulation engineer to implement various treatments, either performed or to be performed. Once these treatments are designed, the reservoir engineer produces a production forecast which is then fed back to all team members involved in the process, enabling an optimization loop. Considering that this is a multi-well (producers and injector) study, any inference is reflected by the analysis and the optimum hydraulic fracture design is chosen for implementation by an offshore stimulation vessel. Traditionally, for forecasting purposes, hydraulic fractures can be implemented using conventional reservoir simulation; however, these are very much approximated models of what the stimulation engineers are designing and implementing. Often, the reservoir, production, stimulation engineers can come up with individual forecasts that are obtained independently and omit basic information. A typical example is the way stresses might change due to stimulation and production and the possibility to account for them in an integrated way. The proposed workflow eliminates these shortcomings, and the asset team delivers a single forecast of the exact fracture design considering a fully consistent model of the subsurface, which is to be implemented by the stimulation vessel for the different wells.

8 March 2023 in Processes
Verified
Journal Article
Open access
PDF file
Liviu DumitracheLiviu Dumitrache
Liviu Dumitrache
Silvian SudituSilvian Suditu
Silvian Suditu
IGIuliana V Ghetiu
Iuliana V Ghetiu
IPIon Pana
Ion Pana
Gheorghe BranoiuGheorghe Branoiu
Gheorghe Branoiu
CECristian Eparu
Cristian Eparu
During current times, it is acknowledged that there is the often presence of extreme meteorological phenomena including floods and landslides, due to heavy rains, large wildfires, due to heat or droughts, permafrost melting, etc. At this stage, the world admits that anthropic activities have an important impact on these phenomena and considers that greenhouse gases are at the core of this climate change. The most common greenhouse gasses have general formulae COX and/or NOX, and they are released during different energy generating/conversion processes such as electric energy generation from fossil fuels or mechanical energy obtained from by-products of fossil fuels. Once acknowledged, the world’s countries have developed long-term strategies to eliminate gradually the release of these gases directly into Earth’s atmosphere. E.g., the EU aims to be climate-neutral by 2050; i.e., its economy will have net-zero greenhouse gas emissions. For this to happen, different effective methodologies have been drafted and implemented with underground gas storage in hydrocarbon depleted geological formations and/or saline aquifers being ones of significance when it comes to electric energy generation from fossil fuels in controlled spaces. The paper presents the simulation of capturing and injecting of these greenhouse gases through injection wells in neighboring depleted natural gas reservoirs using commercial numerical simulators for the Iernut natural gas (CH4) burning power plant which is one of Romania’s most important gas plants. Within this simulation study, the total CO2 quantity that can be stored via the proposed carbon capture and sequestration study and the proportion of each of the three CO2 storage mechanisms involved in the process (physical trapping, hydrodynamic trapping, and geochemical trapping) were determined and presented. Even though previous local studies investigated the potential of CO2 storage and sequestration into the Romanian underground reservoirs, none of it considered using the depleted hydrocarbon reservoirs surrounding the Iernut power plant for this process.

25 July 2025 in Sustainability
Verified
Journal Article
Open access
PDF file
Liviu DumitracheLiviu Dumitrache
Liviu Dumitrache
Silvian SudituSilvian Suditu
Silvian Suditu
Gheorghe BranoiuGheorghe Branoiu
Gheorghe Branoiu
Neagu Daniela DoinaNeagu Daniela Doina
Neagu Daniela Doina
Marian Dacian AlecuMarian Dacian Alecu
Marian Dacian Alecu
This paper presents a numerical simulation study evaluating carbon dioxide capture and storage (CCS) feasibility for the Turceni Power Plant in Oltenia, Romania, using the nearby depleted Bibești-Bulbuceni gas reservoir. A comprehensive reservoir model was developed using Petrel software, integrating geological and reservoir engineering data for the formations of the Bibești-Bulbuceni structure, which is part of the western Moesian Platform. The static model incorporated realistic petrophysical inputs for the Meotian reservoirs. Dynamic simulations were performed using Eclipse compositional simulator with Peng–Robinson equation of state for a CH4-CO2 system. The model was initialized with natural gas initially in place at 149 bar reservoir pressure, then produced through depletion to 20.85 bar final pressure, achieving 80% recovery factor. CO2 injection simulations modeled a phased 19-well injection program over 25 years, with individual well constraints of 100 bar bottom-hole pressure and 200,000 Sm3/day injection rates. Results demonstrate successful injection of a 60 Mt CO2, with final reservoir pressure reaching 101 bar. The modeling framework validates the technical feasibility of transforming Turceni’s power generation into a net-zero process through CCS implementation. Key limitations include simplified geochemical interactions and relying on historical data with associated uncertainties. This study provides quantitative evidence for CCS viability in depleted hydrocarbon reservoirs, supporting industrial decarbonization strategies. The strategy not only aligns with the EU’s climate-neutral policy but also enhances local energy security by repurposing existing geological resources. The findings highlight the potential of CCS to bridge the gap between current energy systems and a sustainable, climate-neutral future.

18 December 2025 in Sustainability
Verified
Journal Article
Open access
PDF file
Silvian SudituSilvian Suditu
Silvian Suditu
Liviu DumitracheLiviu Dumitrache
Liviu Dumitrache
Gheorghe BranoiuGheorghe Branoiu
Gheorghe Branoiu
SDStefan Dragut
Stefan Dragut
Cristian Nicolae EparuCristian Nicolae Eparu
Cristian Nicolae Eparu
PAPrundurel Alina
Prundurel Alina
In the context of intensifying global efforts to mitigate climate change, methane emissions from the oil and gas sector have emerged as a critical environmental and regulatory challenge, given methane’s high global warming potential over short timeframes. This study investigates methane emissions from representative extraction and production of oil and gas facilities in Romania, focusing on fugitive emissions from wells and associated processing infrastructure. The research is grounded in the implementation of a comprehensive Leak Detection and Repair (LDAR) program, aligned with OGMP 2.0 standards, and utilizes advanced detection technologies such as Flame Ionization Detectors (FID), Optical Gas Imaging (OGI), and Quantitative Optical Gas Imaging (QOGI). A systematic inventory and screening of thousands of components enabled the precise identification and quantification of methane leaks, providing actionable data for maintenance and emissions management. The findings highlight that, although the proportion of leaking components is relatively low, cumulative emissions are significant, with block valves, connectors, and compressor shaft seals identified as the most frequent sources of major leaks. The study underscores the importance of rigorous preventive and corrective maintenance, rapid leak remediation, and the adoption of modern detection and continuous monitoring technologies. The approach developed offers a robust framework for regulatory compliance and supports the transition from inventory-based to measurement-based emissions reporting, in line with recent European regulations. Ultimately, effective methane management not only fulfills environmental obligations but also delivers economic benefits by reducing product losses and enhancing operational efficiency, contributing to the decarbonization and sustainability objectives of the energy sector.

15 February 2018 in Revista de Chimie
Verified
Journal Article
Closed access
Liviu DumitracheLiviu Dumitrache
Liviu Dumitrache
INIulian Nistor
Iulian Nistor
Silvian SudituSilvian Suditu
Silvian Suditu
ABAna Maria Badea
Ana Maria Badea
The present study considers the causes of precipitation of dissolved salts from the reservoir water and at the current modeling solutions of the phenomenon using existing commercial reservoir simulators. Consequently, we investigate the capabilities of ECLIPSE family of simulators in terms of showing the salt falling out of solution in the near wellbore region and across the reservoir as we deplete it. The work has been undertaken due to the fact that the wells� production coming from mature dry gas reservoirs is much affected by this salt precipitation, both in the wellbore and near wellbore region, and in order to know when to intervene the well for sweet water washing of these deposits. This is the first successful approach in using Schlumberger�s ECLIPSE Thermal CO2STORE and Petrel, as a pre/post processor, in order to determine when salt falls out of solution.

15 October 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
GSGabriela Ioana Stan
Gabriela Ioana Stan
MTMihail Tudose
Mihail Tudose
PAPrundurel Alina
Prundurel Alina
Gheorghe BranoiuGheorghe Branoiu
Gheorghe Branoiu
Liviu DumitracheLiviu Dumitrache
Liviu Dumitrache
Rami DOUKEHRami DOUKEH
Rami DOUKEH
Water-based drilling fluids (WBMs) are widely applied in petroleum engineering due to their lower cost and reduced environmental impact compared to oil-based muds. However, their performance is severely limited in shale formations, where hydration and swelling of clay minerals lead to wellbore instability. In this study, two novel imidazoline-type inhibitors were synthesized from fatty acids: A-Lin (derived from linoleic acid) and A-Lau (derived from lauric acid). The synthesis involved amidation followed by cyclization, and the products were characterized using FTIR and TGA. Their performance as shale hydration inhibitors was evaluated in WBM formulations and compared with commercial additives (Amine NF and Glycol). The FTIR spectra confirmed successful imidazoline ring formation, while TGA demonstrated good thermal stability up to 150 °C, with A-Lin exhibiting superior resistance due to its unsaturated structure. Rheological tests showed that the synthesized additives reduced plastic viscosity, thereby improving cuttings transport efficiency. Swelling tests revealed that A-Lin achieved the lowest final swelling (6.3%), outperforming both commercial inhibitors and the saturated A-Lau analogue. Furthermore, A-Lin provided the best lubricity coefficient (0.148), reducing torque and drag during drilling. Overall, A-Lin demonstrated strong potential as an efficient, thermally stable, and environmentally compatible shale inhibitor for advanced WBM formulations. Compared to conventional inhibitors such as KCl, glycol, and amine-based additives, A-Lin uniquely combines superior swelling inhibition, enhanced lubricity, and good thermal stability, highlighting its novelty as an imidazoline derivative derived from renewable fatty acids