Kasra hosseinmostofi

Mr. Kasra hosseinmostofi

Institute for Sustainability and Innovation in Structural Engineering (ISISE), universidade do minho, Guimarães, Braga, Portugal
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 May 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
Fatemeh SoltanzadehFatemeh Soltanzadeh
Fatemeh Soltanzadeh
ABAli Edalat Behbahani
Ali Edalat Behbahani
Kasra hosseinmostofiKasra hosseinmostofi
Kasra hosseinmostofi
Carlos Afonso TeixeiraCarlos Afonso Teixeira
Carlos Afonso Teixeira
The environmental consequences of human activities, e.g., the depletion of non-renewable fuel resources, consumption of natural raw materials, and release of huge amounts of CO2 into the atmosphere, resulted in new challenges in materials engineering. Based on these challenges, building materials must fulfil not only mechanical performance criteria, but also produce the least environmental impact accompanied by their production. In the present study, the possibility of employing scrap tire recycled steel fibres (RSF) as a substitution to industrial steel fibres (ISF) for developing more sustainable fibre-reinforced concretes was explored by adopting a life-cycle approach, integrated both environmental and mechanical properties. Four different fibre-reinforced self-compacting concretes–FRSCCs–were tailored by means of replacing the ISFs partially/totally (i.e., 0%, 50%, 67%, 100% by mass of) with the recycled ones. The effect of applying various dosages of RSFs on mechanical behavior of FRSCC–namely compressive, flexural, and splitting tensile responses–were evaluated experimentally. The environmental impacts associated with the production of each FRSCC were also assessed through life-cycle analysis. The potentiality of the RSFs to be used as concrete reinforcement with a comparable mechanical performance to that of ISF-reinforced concrete and lower environmental footprint was evaluated through a consolidated environmental and mechanical index (EM). In this study, using RSFs instead of industrial fibres for developing FRSCC has provided up to 37% higher EM index. The results confirmed the promising prospects for the application of RSFs in developing more eco-efficient and sustainable reinforced concrete.

11 November 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
Fatemeh SoltanzadehFatemeh Soltanzadeh
Fatemeh Soltanzadeh
ABAli Edalat Behbahani
Ali Edalat Behbahani
Kasra hosseinmostofiKasra hosseinmostofi
Kasra hosseinmostofi
Ibrahim Fatih CengizIbrahim Fatih Cengiz
Ibrahim Fatih Cengiz
Joaquim OliveiraJoaquim Oliveira
Joaquim Oliveira
RRRui M. Reis
Rui M. Reis
The integration of basalt-fiber-reinforced polymer (BFRP) rebars into concrete design standards still remains unrealized due to limited knowledge on the performance of the rebars in concrete, particularly in terms of bond durability in harsh conditions. In this work, we investigated the bond durability characteristics of BFRP rebars in fiber-reinforced self-compacting concrete (FRSCC) structures. To this aim, a number of 24 FRSCC pullout specimens reinforced with either BFRP rebar or glass-fiber-reinforced polymer, GFRP, rebar, which is a commonly used type of FRP, were fabricated. Half of these specimens were submerged in simulated seawater for a two-year span, while the other 12 similar specimens were maintained in standard laboratory conditions for comparative purposes. Subsequently, all 24 specimens underwent monotonic and fatigue pull-out tests. The exploration in this study focused on investigating the influence of the environmental condition, reinforcement type, and loading type on the bond stress versus slip relationship, maximum bond stress, and failure mode of the specimens. Based on the results obtained and by adopting the durability approach of industry standards for prediction of the bond retention of FRP-reinforced concrete, the bond strength retention between BFRP/GFRP and FRSCC after 50 years of exposure to seawater was estimated. The outcomes of the study are expected to enhance engineers’ confidence in the use of FRP, especially BFRP, for constructing durable and sustainable reinforced concrete structures in aggressive environments.

5 May 2026 in Buildings
Verified
Journal Article
Open access
PDF file
Kasra hosseinmostofiKasra hosseinmostofi
Kasra hosseinmostofi
Fatemeh SoltanzadehFatemeh Soltanzadeh
Fatemeh Soltanzadeh
EPEduardo Nuno Borges Pereira
Eduardo Nuno Borges Pereira
Fiber properties significantly influence the behavior of steel fiber-reinforced self-compacting concrete (SFRSCC), mainly through their effect on fiber distribution and orientation. This study investigated two main aspects of SFRSCC: (1) the influence of fiber type (industrial and recycled steel fibers), fiber dosage, and specimen depth on fiber distribution and orientation, and (2) the structural performance of SFRSCC and its relationship with fiber type, distribution, and orientation. Four SFRSCC slabs containing different types and dosages of steel fibers were cast from the center outward. Cylindrical specimens were extracted and notched either parallel (θ = 0°) or perpendicular (θ = 90°) to the concrete flow direction to evaluate the influence of fiber orientation on tensile behavior. Splitting tensile tests were performed to assess post-cracking performance. Fiber distribution and orientation were analyzed using digital image analysis (DIA) and micro-computed tomography (CT) on cut sections of the specimens. The results indicated that the use of recycled steel fibers leads to a reduction in tensile performance compared with industrial fibers; however, their structural use remains feasible and offers environmental benefits by valorizing waste materials and reducing the carbon footprint of fiber-reinforced concrete. CT analysis provided accurate three-dimensional characterization of fiber orientation and distribution, revealing clustering effects in recycled fiber mixes not detectable by DIA.

18 September 2026 in Fibers
Verified
Journal Article
Open access
PDF file
Kasra hosseinmostofiKasra hosseinmostofi
Kasra hosseinmostofi
Fatemeh SoltanzadehFatemeh Soltanzadeh
Fatemeh Soltanzadeh
EPEduardo Nuno Borges Pereira
Eduardo Nuno Borges Pereira
Recycled tire steel fibers (RSFs) offer a resource-efficient alternative to manufactured industrial steel fibers (ISFs), but their irregular geometry and casting-induced orientation generate pronounced direction-dependent post-cracking behavior. This study develops and evaluates a three-dimensional orientation-conditioned finite element framework for notched splitting tensile tests of self-compacting concrete containing a constant total steel fiber dosage of 90 kg/m3 with ISF:RSF proportions of 90:0, 45:45, 30:60, and 0:90. The experimental mechanical response and independently measured fiber architecture provide the basis for constitutive identification and numerical–experimental assessment. The composite is represented in Abaqus/Standard using the concrete damage plasticity model and eight-node full-integration hexahedral elements. Fiber bridging is introduced through orientation-specific quadrilinear tensile stress-crack-opening laws derived from the measured peak and residual responses, allowing directional fiber effects to be represented without discrete fiber modeling. The simulations reproduce the measured peak, residual, and post-cracking responses for crack planes parallel and perpendicular to the casting flow direction, with deviations below 5% at the evaluated characteristic response points. Progressive RSF replacement reduces peak tensile resistance, whereas hybrid and mono-RSF mixtures retain a smoother post-peak decay. The higher residual capacity observed for the favorable orientation is consistent with the independently measured effective fiber population and orientation factor. The framework provides an efficient continuum strategy for incorporating casting-induced anisotropy into engineering-scale analyses of RSF-reinforced concrete.

24 October 2026 in Infrastructures
Verified
Journal Article
Open access
PDF file
Kasra hosseinmostofiKasra hosseinmostofi
Kasra hosseinmostofi
Fatemeh SoltanzadehFatemeh Soltanzadeh
Fatemeh Soltanzadeh
MVMaria Isabel Brito Valente
Maria Isabel Brito Valente
ABAli Edalat Behbahani
Ali Edalat Behbahani
EPEduardo Nuno Borges Pereira
Eduardo Nuno Borges Pereira
This study compares the drop-weight impact response of self-compacting concrete (SCC) slabs with industrial (ISF), recycled tyre-derived (RSF), and hybrid ISF–RSF steel-fibre reinforcement. Four 1200 × 1200 × 100 mm slabs were tested at 28 days: plain SCC and slabs containing 90 kg/m3 ISF, 90 kg/m3 RSF, or 45 kg/m3 of each. A 105 kg projectile was released from 4.0 m (nominal potential energy 4.12 kJ). Damage, mean underside deflection, contact force and local acceleration were recorded. The plain slab perforated and developed rear-face scabbing; none of the fibre-reinforced slabs exhibited these failure modes under the investigated condition. The ISF slab showed the smallest peak and terminal residual average deflections, while the hybrid slab exhibited the largest peak and the RSF slab the largest terminal residual deflection. Peak contact forces were 285.83, 256.52 and 258.00 kN for ISF, hybrid and RSF, compared with 110.00 kN for plain SCC. Because one slab represented each mixture and matrix compositions varied, the comparisons are descriptive and do not isolate fibre-type effects or establish energy-absorption capacities or design values.

28 October 2026 in Materials
Verified
Journal Article
Open access
PDF file
Kasra hosseinmostofiKasra hosseinmostofi
Kasra hosseinmostofi
Fatemeh SoltanzadehFatemeh Soltanzadeh
Fatemeh Soltanzadeh
ABAli Edalat Behbahani
Ali Edalat Behbahani
MVMaria Isabel Brito Valente
Maria Isabel Brito Valente
EPEduardo Nuno Borges Pereira
Eduardo Nuno Borges Pereira
Selecting fiber-reinforced concrete (FRC) for thin marine shells is a multi-constraint decision because lower cradle-to-gate global warming potential (GWP) at equal volume may be offset by post-cracking requirements, interface behavior, impact response, or detailing. This study introduces a performance-constrained, multi-evidence screening framework and illustrates it with traceable mechanical, fiber-field, marine-bond, impact, and life-cycle datasets for four self-compacting concrete systems with 90 kg/m3 of industrial and/or recycled steel fibers. Unlike a compensatory environmental–mechanical index, the framework applies simultaneous normalized response constraints, independent interface and component gates, deterministic ranking-sensitivity analysis, and component carbon-parity budgets. Compressive strengths were 60.03–66.10 MPa, whereas post-cracking properties varied substantially. At 80% retained performance, beam work favors I30R60, whereas an additional 3 mm splitting constraint favors I45R45. For a 0.144 m3 panel, I45R45 has 3.89 kg CO2-eq less reported cradle-to-gate GWP than I90R0, corresponding to only 5.50% additional concrete before carbon parity under the source inventory. Results depend on published means and inventory assumptions. The four documented 4.0 m impact tests (one slab per tested composition) illustrate the component gate as a proof of concept rather than a statistically supported pass/fail criterion. Replicated component testing and project-specific verification are required before design qualification.