KENZHEBEK MYRZABEKOV

Mr. KENZHEBEK MYRZABEKOV

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 January 2026 in Engineering Proceedings
Verified
Conference Paper
Open access
PDF file
KENZHEBEK MYRZABEKOVKENZHEBEK MYRZABEKOV
KENZHEBEK MYRZABEKOV
Kuanysh AlipbayevKuanysh Alipbayev
Kuanysh Alipbayev
ABAkylbek Bapyshev
Akylbek Bapyshev
Zhandos KozhabekZhandos Kozhabek
Zhandos Kozhabek
NKNazgul Kaliyeva
Nazgul Kaliyeva
MNMakpal Nogaibayeva
Makpal Nogaibayeva
The paper offers a practical method for selecting an electric pump and battery pack for low-thrust liquid rocket engines. The approach combines 0D/1D modeling of hydraulic, electromechanical, and thermal subsystems in a single environment and is supplemented by sensitivity analysis, correlation analysis, and Monte Carlo simulation with N = 3000 iterations to verify the stability of the estimates. The methodology has been tested on mission profiles in the 5–50 kN thrust range and shows that the electric pump scheme is most effective at low thrusts, while an increase in thrust leads to a disproportionate increase in energy and thermal loads and narrows the scope of applicability. The determining factors remain the hydraulic efficiency of the pump η_pump and the oxidizer pressure; electrical parameters such as bus voltage and internal battery resistance have less influence and become noticeable at high power levels. Modeling confirms the stability of the obtained estimates; at a thrust of 20 kN, the spread of the battery block mass is close to ±10%. The proposed methodology provides quantitative guidelines in the early stages of design and helps to justify the scope of application of electric pump liquid rocket engines; expansion beyond low thrust requires progress in battery technologies.

25 June 2025 in Drones
Verified
Journal Article
Open access
PDF file
AFAlina Fazylova
Alina Fazylova
Kuanysh AlipbayevKuanysh Alipbayev
Kuanysh Alipbayev
KENZHEBEK MYRZABEKOVKENZHEBEK MYRZABEKOV
KENZHEBEK MYRZABEKOV
Alisher AdenAlisher Aden
Alisher Aden
Teodor IlievTeodor Iliev
Teodor Iliev
For unmanned aerial vehicles with long-duration autonomous missions, efficient energy management is critically important. One of the most promising solutions is solar power, the implementation of which requires the continuous orientation tracking of the Sun’s position. This study presents a three-axis active solar tracking system based on a gimbal mount, providing full kinematic control of the panel in space. A mathematical model of orientation is developed using the Earth-Centered Inertial, local geographic frame, and unmanned aerial vehicle body coordinate systems. An aerodynamic analysis is conducted, including a quantitative assessment of drag, lift, and torque on the panel. Based on the obtained characteristics, limiting conditions for the safe operation of the tracker are formulated. An adaptive control algorithm is introduced, minimizing a generalized objective function that accounts for angular deviation, aerodynamic loads, and current energy balance. Numerical simulations are described, demonstrating system stability under various scenarios: turbulence, maneuvers, power limitations, and sensor errors. The results confirm the effectiveness of the proposed approach under real-world operating conditions.

1 January 2026 in International Journal of Aerospace Engineering
Verified
Journal Article
Open access
KENZHEBEK MYRZABEKOVKENZHEBEK MYRZABEKOV
KENZHEBEK MYRZABEKOV
HKHasan Karabay
Hasan Karabay
Kuanysh AlipbayevKuanysh Alipbayev
Kuanysh Alipbayev
ABAkylbek Bapyshev
Akylbek Bapyshev
Electric pump systems are increasingly being considered as an alternative to turbopumps in liquid rocket engines. Interest is driven by the potential for reduced dry mass and increased system efficiency. This systematic review analyzes 89 peer‐reviewed publications from 2008 to 2025. The applicability limits of EPS architecture are defined based on normalized metrics that ensure comparability of results. Sources were selected through a systematic search of leading scientific databases in accordance with the PRISMA procedure. The “battery‐to‐thrust ratio” indicator was introduced for interarticle comparison. A reduction in the “dry” weight of the engine by 0.23–0.46 kg/kN in the thrust range of 10–100 kN is shown, mainly due to the elimination of the hot turbomachine and a reduction in the number of high‐temperature and mechanically loaded components. The current level of EPS already meets the requirements of light and medium launch vehicles. Further development is linked to an increase in the specific energy of batteries to 600 W·h/kg, the improvement of cryogenic heat dissipation solutions, the qualification of large‐sized products manufactured using additive manufacturing techniques, and the bench validation of multiphysical digital twins. The implementation of these areas will accelerate the transition to serial EPS engines and expand the possibilities for creating reusable and more environmentally friendly rocket systems.

15 June 2026 in Robotics
Verified
Journal Article
Open access
PDF file
AFAlina Fazylova
Alina Fazylova
Kuanysh AlipbayevKuanysh Alipbayev
Kuanysh Alipbayev
Teodor IlievTeodor Iliev
Teodor Iliev
FOFariza Oraz
Fariza Oraz
KENZHEBEK MYRZABEKOVKENZHEBEK MYRZABEKOV
KENZHEBEK MYRZABEKOV
This paper proposes a physically based hybrid architecture for controlling mobile robot drives. It combines a model-based controller, an adaptive neural network compensator for residual dynamics, and a Lyapunov-based stability supervision mechanism. Unlike existing hybrid control approaches, the proposed architecture implements a structured injection of neural network correction directly into the physical drive model with a controlled Lyapunov-based adaptation constraint. A mathematical model of the electromechanical drive of a differential mobile platform is developed, taking into account electrical and mechanical dynamics, wheel-to-surface contact interaction, and the system’s energy characteristics. Numerical simulation results demonstrate that the hybrid approach improves tracking accuracy, improves transient response, and ensures stable operation of the control system under parametric uncertainty, adhesion changes, and external disturbances. The proposed architecture maintains the physical interpretability of the model while simultaneously enhancing the system’s adaptability. The obtained results confirm the effectiveness of the developed method and its potential for application in control systems for mobile robotic platforms.

7 September 2026 in Machines
Verified
Journal Article
Open access
PDF file
KENZHEBEK MYRZABEKOVKENZHEBEK MYRZABEKOV
KENZHEBEK MYRZABEKOV
AFAlina Fazylova
Alina Fazylova
Kuanysh AlipbayevKuanysh Alipbayev
Kuanysh Alipbayev
ABAkylbek Bapyshev
Akylbek Bapyshev
Teodor IlievTeodor Iliev
Teodor Iliev
Electric pump-fed liquid rocket engines require coordinated propellant delivery under coupled hydraulic, electrical, actuator, and thermal constraints. This study develops an integrated reduced-order model of a dual-channel electric pump-fed propellant system, including the battery and DC bus, power converters, two independently driven motor–pump units, hydraulic feed lines, control valves, combustion chamber, and thermal states. A hierarchical constrained multi-criteria supervisory controller is formulated to regulate chamber pressure, oxidizer-to-fuel mixture ratio, feed-channel coordination, electrical loading, and thermal response. Performance is compared with a conventional PI controller and an enhanced PI configuration incorporating feedforward and disturbance compensation under nominal, degraded, long-duration, and constraint-active scenarios. Relative to the baseline PI controller, the proposed controller reduced the startup pressure peak from 2.64 to 2.32 MPa, pressure RMSE from 0.016 to 0.006 MPa, and mean branch synchronization error from 0.112 to 0.028 MPa. The minimum battery voltage increased from 87.0 to 90.4 V, while the peak motor current decreased from approximately 88 to 65 A. In the 1800 s thermal case, the maximum fuel-drive temperature decreased from approximately 104 to 74 °C. Numerical verification and comparison with published experimental benchmarks supported the physical plausibility and equilibrium-scale behavior of the reduced-order model, while differences in absolute transient time scales limit its use for quantitative prediction of hardware transient dynamics. The results indicate improved coordinated control within the investigated operating envelope and support the use of the framework for comparative system-level assessment and preliminary design of small-class electric-pump propulsion systems.

14 September 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
FOFariza Oraz
Fariza Oraz
KENZHEBEK MYRZABEKOVKENZHEBEK MYRZABEKOV
KENZHEBEK MYRZABEKOV
KIKonstantin Ivanov
Konstantin Ivanov
Kuanysh AlipbayevKuanysh Alipbayev
Kuanysh Alipbayev
This study presents a comprehensive dynamic analysis of mechanical systems incorporating elastic joints and introduces an adaptive vibration actuator with an integrated transmission variator. The system’s behavior is modeled through kinematic and dynamic formulations, utilizing both analytical and numerical methods. The analysis reveals that the inclusion of elastic elements enables a force adaptation effect, allowing the output element to adjust dynamically to variations in external loading. Under conditions of constant input power, the output speed varies inversely with the load, ensuring reliable adaptive performance. Furthermore, the elastic joints facilitate internal force redistribution, enhancing energy efficiency and reducing mechanical losses. These findings hold relevance for applications in industrial automation and robotics, where consistent functionality under variable load conditions is essential.