The study aims to identify the main reason of the thermal response time difference between historical and modern buildings. Therefore, in this study, the thermal response time of historical and modern wall structures and its effect on the interior air temperature change was investigated parametrically. Considering the environmental conditions of Kocaeli province, Turkey, the thermal response time of a historical building wall made of a cut stone was compared with those of brick and gas concrete wall structures having the same overall heat transfer coefficient using the second-order lumped capacitance approach. The insulation thicknesses of the three different construction materials for U-values of 0.6, 0.4 and 0.2 W/m2K were calculated and temperature variations of indoor environment, wall and insulation material were analyzed. In addition, the required thicknesses of insulation material to obtain the same heat transfer coefficients were determined in case of using the 0.1 m thickness of cut stone, brick and gas concrete structure materials. The maximum and minimum amplitudes of the inside air temperature were recorded as 0.59 and 0.18oC for the aerated concrete in Case 3 and for the cut stone in Case 2, respectively. As a result, the walls with high thermal inertia are less affected by the changes in the environmental temperature although their U-value is relatively high. For this reason, it can be stated that one of the reasons why historical buildings have thick walls is to increase thermal inertia and thereby improve thermal comfort by reducing energy loss.
1 January 2026 in International Journal of Aerospace Engineering
Electric pump systems are increasingly being considered as an alternative to turbopumps in liquid rocket engines. Interest is driven by the potential for reduced dry mass and increased system efficiency. This systematic review analyzes 89 peer‐reviewed publications from 2008 to 2025. The applicability limits of EPS architecture are defined based on normalized metrics that ensure comparability of results. Sources were selected through a systematic search of leading scientific databases in accordance with the PRISMA procedure. The “battery‐to‐thrust ratio” indicator was introduced for interarticle comparison. A reduction in the “dry” weight of the engine by 0.23–0.46 kg/kN in the thrust range of 10–100 kN is shown, mainly due to the elimination of the hot turbomachine and a reduction in the number of high‐temperature and mechanically loaded components. The current level of EPS already meets the requirements of light and medium launch vehicles. Further development is linked to an increase in the specific energy of batteries to 600 W·h/kg, the improvement of cryogenic heat dissipation solutions, the qualification of large‐sized products manufactured using additive manufacturing techniques, and the bench validation of multiphysical digital twins. The implementation of these areas will accelerate the transition to serial EPS engines and expand the possibilities for creating reusable and more environmentally friendly rocket systems.