Calcium looping systems constitute a promising candidate for thermochemical energy storage (TCES) applications, as evidenced by the constantly escalating scientific and industrial interest. However, the technologically feasible transition from the research scale towards industrial and highly competitive markets sets as a prerequisite the optimal design and operation of the process, especially corresponding reactors. The present study investigates for the first time the development of a detailed, one-dimensional mathematical model for the steady-state simulation of a novel drop-tube carbonator reactor as a core equipment unit in a concentrated solar power (CSP)-thermochemical energy storage integration plant. A validated kinetic mathematical model for a carbonation reaction (CaO(s) + CO2(g) → CaCO3(s)) focused on thermochemical energy storage conditions was developed and implemented for different material conditions. The fast gas–solid reaction kinetics conformed with the drop-tube reactor concept, as the latter is suitable for very fast reactions. Reaction kinetics were controlled by the reaction temperature. Varying state profiles were computed across the length of the reactor by using a mathematical model in which reactant conversions, the reaction rate, and the temperature and velocity of gas and solid phases provided crucial information on the carbonator’s performance, among other factors. Through process simulations, the model-based investigation approach revealed respective restrictions on a tailor-made reactor of 10 kWth, pointing out the necessity of detailed models as a provision for design and scale-up studies.
The shipping sector is responsible for a considerable share of global CO2 emissions and is under pressure to reduce emissions and adopt carbon-neutral fuels. Among the proposed alternatives, methanol produced from green hydrogen and biogenic CO2 represents a promising option. However, the feasibility of its production is significantly influenced by the composition and variability of the bio-CO2 feedstock, which can negatively impact the complete value chain. To address these challenges, sampling campaigns were carried out at actual bio-CO2-emitting sites, namely biogas and biomass combustion facilities, to characterize the impurity profiles and determine the appropriate conditioning requirements. A novel membrane gas absorption system with a Diethanolamine solution was deployed directly in the field to capture, as well as purify to a certain extent, the CO2 stream. The system demonstrated high efficiency in removing most impurities, achieving high CO2 capture rates and impurity reduction close to 90%. However, residual chlorine species were detected in the CO2 streams from biogas plants, suggesting the need for additional conditioning to meet the purity specifications required for methanol synthesis. Given that the feedstock composition and upstream process conditions could significantly affect the final output and present considerable variations, the implementation of additional cleaning measures is recommended before synthesis.
In the present work, a novel foam burner design is proposed and experimentally evaluated for operation with highly diluted syngas mixtures. The lab-scale burner consists of a purpose-built, square-shaped, high-temperature-grade stainless steel tubular reactor filled with square-sectioned siliconized silico carbide (SiSiC) foams. The assembly was installed in an electrical furnace. Spatially resolved temperature measurements were obtained along the reactor axis, while simultaneous measurements of CO, CO2, H2, O2, and N2 were taken at the burner exit and the water levels were recorded upstream and downstream of the reactor. The results clearly show that flames can be stabilized along the reactor for a range of foam characteristics and operating conditions. Hydrogen conversion efficiencies in excess of 98%, and overall thermal efficiencies close to 95% were achieved for the selected operating conditions. Overall, the denser 10 ppi foam demonstrated superior combustion characteristics in terms of stability, lower enthalpy rises, and a wider operating range at the expense of a very modest pressure drop penalty. Finally, scanning electron microscopy, coupled with energy dispersion spectroscopy (SEM/EDS) and Raman spectroscopy analyses, was used to determine the morphological and compositional characteristics of the pristine and aged foams. After more than 100 h of operation, no significant performance degradation was observed, even though the burner design was subjected to considerable thermal stress.