MD RAKIBUL ISLAM

Mr. MD RAKIBUL ISLAM

University of Central Florida, Orlando, Florida, USA
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 2018 in Journal of Materials in Civil Engineering
Verified
Journal Article
Closed access
MNMd. Abu Noaman
Md. Abu Noaman
MIMd. Nazrul Islam
Md. Nazrul Islam
MD RAKIBUL ISLAMMD RAKIBUL ISLAM
MD RAKIBUL ISLAM
MKMd. Rezul Karim
Md. Rezul Karim
The objective of this research was to determine the mechanical properties, including among others compressive strength (fc′) , tensile strength (fsp) , flexural strength (fr) , modulus of elasticity (Ec) , and Poisson’s ratio (ν) of a brick aggregate concrete (BAC) containing rice husk ash (RHA) as a partial replacement of cement. Concrete cylinders with 100-mm diameter and 200-mm height were cast using 0–25% RHA as a partial replacement of cement with water-to-binder ratios of 0.45, 0.50, and 0.55, with a mix ratio of 1:1.5:3, and cured in water at room temperature. The experimental results indicated that fc′ and fsp increased gradually with the increasing RHA up to 15%. However, the maximum values of these were observed with 10% RHA. By contrast, fr of BAC containing up to 25% RHA was found lower than that of control concrete. Ec and ν of BAC with RHA were higher than those of control concrete. It was observed that mechanical properties of BAC were influenced significantly due to the inclusion of 15% RHA as a partial replacement of cement with a water-to-binder ratio of 0.50.

22 April 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
MD RAKIBUL ISLAMMD RAKIBUL ISLAM
MD RAKIBUL ISLAM
AMAbdel-Baset Mohamed
Abdel-Baset Mohamed
ZIZubayer Islam
Zubayer Islam
SZShile Zhang
Shile Zhang
The COVID-19 pandemic has had a global impact, disrupting the normal trends of our everyday life. More specifically, the effects of COVID-19 on road safety are still largely unexplored. Hence, this study aims to investigate the change in road safety trends due to COVID-19 using real-time traffic parameters. Results from the extensive analyses of the 2017 to 2020 data of Interstate-4 show that traffic volume decreased by 13.6% in 2020 compared to the average of 2017–2019’s volume, whereas there is a decreasing number of crashes at the higher volume. Average speed increased by 11.3% during the COVID-19 period; however, the increase in average speed during the COVID-19 period has an insignificant relationship with crash severities. Fatal crashes increased, while total crashes decreased, during the COVID-19 period; severe crashes decreased with the total crashes. Alcohol-related crashes decreased by 22% from 2019 to 2020. Thus, the road-safety trend due to the impact of COVID-19 has evidently changed and presents a unique trend. The findings of the study suggest a larger need for a more in-depth study to analyze the impact of COVID-19 on road safety, to minimize fatalities on roads through appropriate policy measures.


22 May 2024 in npj Sustainable Mobility and Transport
Verified
Journal Article
Open access
PDF file
MD RAKIBUL ISLAMMD RAKIBUL ISLAM
MD RAKIBUL ISLAM
DWDongdong Wang
Dongdong Wang
MAMohamed Abdel-Aty
Mohamed Abdel-Aty
Real-time crash and severity prediction is a complex task, and there is no existing framework to predict crash likelihood and severity together. Creating such a framework poses numerous challenges, particularly not independent and identically distributed (non-IID) data, large model sizes with high computational costs, missing data, sensitivity vs. false alarm rate (FAR) trade-offs, and real-world deployment strategies. This study introduces a novel modeling technique to address these challenges and develops a deployable real-world framework. We used extensive real-time traffic and weather data to develop a crash likelihood prediction modeling prototype, leveraging our preliminary work of spatial ensemble modeling. Next, we equipped this spatial ensemble model with local model regularization to calibrate model confidence training. The investigated regularizations include weight decay, label smoothing and knowledge distillation. Furthermore, post-calibration on model outputs was conducted to improve severity rating identification. We tested the framework to predict crashes and severity in real-time, categorizing crashes into four levels. Results were compared with benchmark models, real-world deployment mechanisms were explained, traffic safety improvement potential and sustainability aspects of the study were discussed. Modeling results demonstrated excellent performance, and fatal, severe, minor and PDO crash severities were predicted with 91.7%, 83.3%, 85.6%, and 87.7% sensitivity, respectively, and with very low FAR. Similarly, the viability of our model to predict different severity levels for specific crash types, i.e., all-crash types, rear-end crashes, and sideswipe/angle crashes, were examined, and it showed excellent performance. Our modeling technique showed great potential for reducing model size, lowering computational costs, improving sensitivity, and, most importantly, reducing FAR. Finally, the deployment strategy for the proposed crash and severity prediction technique is discussed, and its potential to predict crashes with severity levels in real-time will make a substantial contribution to tailoring specific strategies to prevent crashes.

31 October 2018 in IET Intelligent Transport Systems
Verified
Journal Article
Open access
PDF file
MD RAKIBUL ISLAMMD RAKIBUL ISLAM
MD RAKIBUL ISLAM
MHMd. University of Engineering and Hadiuzzaman
Md. University of Engineering and Hadiuzzaman
SBSaurav Barua
Saurav Barua
TSTahmida Hossain Shimu
Tahmida Hossain Shimu
Limitation of probe sensor‐based technique to collect traffic data in the temporal domain tends to combine it with the fixed sensor. This combination technique involves extra equipment installation difficulties when the road segment becomes non‐homogeneous due to traffic operations or lane configurations. Particularly, in developing countries, chaotic traffic pattern and the absence of a fixed sensor in the roadway create the trajectory reconstruction even more challenging. Video‐sensor (also, other fixed‐sensor) based trajectory reconstruction techniques require sensors for each non‐homogeneous road segment and need separate fundamental diagram (FD) to estimate the required traffic parameters. These difficulties can be overcome by using probe sensors. Thus, this research proposes an approach of estimating traffic parameters from probe data considering variable road capacity. Those parameters are used as input to reconstruct the trajectories of all vehicles in the traffic stream (i.e. also non‐probe vehicles, in particular) through the application of a lopsided network. The proposed approach improves the percent root mean square error of estimated travel time by around 38% compared with that which uses traffic parameters obtained from FD with respect to ground‐truth travel time. This approach is very appropriate, economical and reliable, especially where the required number of fixed sensors is unavailable.

22 May 2023 in Transportation Research Record: Journal of the Transportation Research Board
Verified
Journal Article
Closed access
MD RAKIBUL ISLAMMD RAKIBUL ISLAM
MD RAKIBUL ISLAM
AMAbdel-Baset Mohamed
Abdel-Baset Mohamed
ZIZubayer Islam
Zubayer Islam
AAAmr Abdelraouf
Amr Abdelraouf
This study proposes a three-stage framework for real-time crash likelihood and severity prediction. Firstly, a real-time crash likelihood prediction model was developed. Secondly, a real-time crash severity clustering model was proposed to cluster the crashes into different severity levels. Thirdly, a severity clustering validation model was developed to assess the performance of the proposed severity clustering model. Extensive data processing techniques were employed to collect real-time features from State Road 408 in Orlando, Florida, and a total of 6,750,072 events (625 crash events and 6,749,447 non-crash events) along with 24 real-time features were used. To develop the crash likelihood prediction model, nine machine-learning techniques were attempted, and the convolutional neural network model was found to provide the best result with respect to the sensitivity (0.916), false alarm rate (0.111), and area under the receiver operating characteristic curve (0.967). Davies–Bouldin index criteria were used to find the detector location that generated the most accurate traffic information to cluster the crashes into severity levels, and based on this traffic information, k-means clustering was applied to develop the severity clustering model. Finally, a severity clustering validation model was developed after investigating nine machine-learning techniques to validate the developed severity clustering model, and the decision tree model provided the best results based on three levels of sensitivity and specificity values. The developed framework has the potential to help traffic management centers to warn road users or develop transportation systems management and operations strategies in real time to avoid crashes or minimize the severity and, thus, can significantly contribute to improving road safety.