The research on population shows that the count of overweight people has been constantly growing. Therefore, designing and modifying utility items, e.g., furniture should be brought into focus. Indeed, furniture function and safety is associated with the weight of a user. Current processes and standards dealing with the design of seating furniture do not meet the requirements of overweight users. The research is aimed at designing flexible chairs consisting of lamellae using the finite element method (FEM). Three types of glued lamellae based on wood with different number of layers and thickness were made and subsequently, their mechanical properties were tested. Values for modulus of elasticity and modulus of rupture were used to determine stress and deformation applying the FEM method for modelling flexible chairs. In this research, the methodology for evaluating the ultimate state of flexible chairs used to analyse deformation and stability was defined. The analysis confirms that several designed constructions meet the requirements of actual standards (valid for the weight of a user up to 110 kg) but fail to meet the requirements for weight gain of a population.
Good quality sleep is a prerequisite for regenerating the human body, hence, beds should be optimized for specific group of users, taking into consideration their size or age. Current research studies show similar trends in adult populations around the world, where increases in height as well as in weight can be observed. Not only the ergonomics but also the safety of beds, which is determined by the quality and dimensions of structural elements, must be taken into account in bed design. Designing the structural elements for users with a high body weight is presented in the paper. The properties of a bed’s structural elements, which ensure comfort as well as the safety of a bed are affected by the excess weight of users. New requirements for cross sections, suitable materials and construction of structural elements were set in accordance with the standard EN 1725:1998. Also, an analysis of stresses was done using the finite element method (FEM) and the calculation of allowable stresses related to a user weighing 150 kg. The results of our research provide complete standards and regulations associated with the safety requirements of bedroom furniture for users with a weight more than 110 kg to ensure that the manusfacture of quality products in Slovakia.
The reliability of furniture constitutes one of the most important features taken into consideration when buying furniture. However, to evaluate furniture reliability, furniture manufacturers often rely on their own experiences and common patterns without the usage of specialized tools. The presented work aimed to develop a mathematical apparatus to be used in a specially created web application that would enable the calculation of the reliability of the selected furniture joints and whole case furniture structures. This paper describes the functionality features of the newly created web application, which could be used in the furniture industry practice providing a valuable support tool for engineering works. In this paper, the reliability calculations are presented for the examples of furniture eccentric joints and case-type furniture made of those joints. Two different materials, namely MDF and laminated three-layer particleboard, of 18 mm are considered. The achieved results confirm the higher reliability of the furniture eccentric joints made of MDF of 18 mm in comparison to the furniture eccentric joints made of particleboard of the same thickness. The calculations of reliability for the analyzed construction of furniture confirmed also that the reliability improved when the parallel reliability structure was adapted. That was the case for both the MDF and laminated three-layer particleboard.
Cross-laminated timber (CLT) is gaining popularity as a sustainable alternative to traditional building materials. However, the decline of natural vegetation and the growth of plantation hardwoods has led the researchers to consider alternatives. This study presents a comparative analysis of bending and rolling shear performance of homogenous poplar (Populus nigra L.) CLT and hybrid CLT, with maple (Acer platanoides L.), in the outer layer and poplar in the core, compared to spruce (Picea abies (L.), H. Karst.) CLT. The CLT panels were prepared using one-component polyurethane (1C-PUR) and melamine adhesive (ME). Poplar CLT exhibited equal or better properties than spruce CLT. The outer maple layer in the hybrid CLT enhanced the global bending modulus (Emg) and bending strength (fm) by 74% and 37%, respectively, due to its higher modulus of elasticity better shear resistance by reducing the cross-layer stress concentrations and rolling shear failure. Additionally, both the adhesive types and wood species significantly influenced the fm, Emg, and rolling shear strength (fr) independently, while their interaction effect was found to be non-significant. The experimental bending stiffness was higher than the theoretical values. The shear analogy method provided the most accurate results for bending and shear strengths, while bending stiffness was best predicted by the modified gamma method, with minor variations. The finite-element models (FEMs) also produced results with a deviation of only 10%.
With their properties, upholstery covering materials significantly influence the quality of upholstered products. These materials form the surface layer of upholstered furniture; any damage to this material is immediately visible to the user. We consider the stitches connecting the covering fabrics to be one of the critical points of the upholstered surface, therefore they must have the required strength. Faux leather is one of the most used upholstery materials. The main aim of the paper is to determine the effect of upholstery faux leather, stitch length, point needle, and needle size on the strength of the stitches and the seam efficiency. The results of the experiment proved the suitability of using a sewing needle LR for joining covering materials such as faux leathers. The highest force to seam a rupture in the joints was achieved in the direction of the warp yarns of the underlying layer of PU (Polyurethane) faux leather with a stitch length of 4 mm and needle type LR/90. The highest seam efficiency was achieved with seams in the direction of the weft yarns of the PVC (Polyvinyl chloride) faux leather underlying layer with a stitch length of 4 mm and needle type LR/90. If the underlying layer of faux leather is a fabric with canvas binding, a higher seam efficiency of joints is assumed.