Neyda de la Caridad Om Tapanes

Dr. Neyda de la Caridad Om Tapanes

Metallurgy Department, State University of Rio de Janeiro, Rio de Janeiro, Brazil
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 August 2023 in Polymers
Verified
Journal Article
Open access
PDF file
Pedro Henrique Poubel Mendonça da SilveiraPedro Henrique Poubel Mendonça da Silveira
Pedro Henrique Poubel Mendonça da Silveira
MSMônica Cristina Celestino Santos
Mônica Cristina Celestino Santos
YCYago Soares Chaves
Yago Soares Chaves
MRMatheus Ribeiro
Matheus Ribeiro
BMBelayne Zanini Marchi
Belayne Zanini Marchi
DBDaniele Cruz Bastos
Daniele Cruz Bastos
This article presents a comprehensive study on the physical, mechanical, thermal, and chemical properties of polypropylene (PP) composites reinforced with hemp fibers (HF) and compatibilized with maleic anhydride (MAPP). The composites were processed using a twin-screw extruder, followed by hot compression at 190 °C. Subsequently, the composites were analyzed using Izod impact and Shore D hardness tests to evaluate their mechanical properties. Thermal properties were investigated through differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), while X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR) were employed to study their chemical properties. Additionally, a statistical analysis was conducted to compare the average results of the impact and hardness tests. XRD analysis revealed that the addition of HF and MAPP led to the disappearance of peaks corresponding to the beta phase in pure PP. Hemp fibers exhibited an impressive crystallinity of 82.10%, surpassing other natural fibers, and had a significant molecular orientation angle (MFA) of 6.06°, making them highly desirable for engineering applications. The crystallite size was observed to be relatively large, at 32.49 nm. FTIR analysis demonstrated strong interactions between the fiber, compatibilizing agent, and polymer matrix. TGA tests showed that the addition of 5 and 10 wt.% MAPP resulted in complete degradation of the composites, similar to pure PP. DSC analyses indicated a reduction in crystallinity (Xc) due to the incorporation of HF and MAPP. Shore D hardness tests revealed an increase in hardness with the addition of 5 wt.% MAPP, while a steep decline in this property was observed with 10 wt.% MAPP. In terms of impact resistance, fractions of 3 and 5 wt.% MAPP in the composites exhibited improved performance compared to the pure polymer. Analysis of variance (ANOVA) was employed to ensure the statistical reliability of the mechanical test results. This comprehensive study sheds light on the diverse properties of PP composites reinforced with hemp fibers and compatibilized with MAPP, emphasizing their potential as sustainable materials for engineering applications. The results contribute to the understanding of the structural and functional aspects of these composites, guiding future research and developments in the field.

29 August 2022 in Polymers
Verified
Journal Article
Open access
PDF file
Roberta Anastácia Palermo FernandesRoberta Anastácia Palermo Fernandes
Roberta Anastácia Palermo Fernandes
Pedro Henrique Poubel Mendonça da SilveiraPedro Henrique Poubel Mendonça da Silveira
Pedro Henrique Poubel Mendonça da Silveira
BBBeatriz Cruz Bastos
Beatriz Cruz Bastos
PPPatricia Soares da Costa Pereira
Patricia Soares da Costa Pereira
Valdir Agustinho de MeloValdir Agustinho de Melo
Valdir Agustinho de Melo
DBDaniele Cruz Bastos
Daniele Cruz Bastos
Composites based on virgin and recycled polypropylene (PP and rPP) reinforced with 15 wt% sisal fibers, with and without alkali treatment, were prepared by compression molding in a mat composed of a three-layer sandwich structure. The sisal was characterized by Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). The composites were characterized according to physical and mechanical properties. Additionally, a factorial experimental design was used to statistically evaluate the mechanical properties of the composite. The FTIR and XRD indicated the partial removal of amorphous materials from the surface of the sisal after alkali treatment. The composites’ density results varied from 0.892 to 0.927 g·cm−3, which was in the desirable range for producing lightweight automotive components. A slight decrease in the hardness of the pure rPP and rPP composites in relation to the PP was observed. The water absorption was higher in rPP composites, regardless of the chemical treatment. Moreover, the impact resistance of PP and its composites was higher than the values for rPP. Statistical analysis showed that the alkali treatment was a significant factor for the hardness of the rPP and PP composites, and that the addition of the sisal layer was relevant to improve the impact resistance of the composites.

19 July 2024 in Polymers
Verified
Journal Article
Open access
PDF file
Pedro Henrique Poubel Mendonça da SilveiraPedro Henrique Poubel Mendonça da Silveira
Pedro Henrique Poubel Mendonça da Silveira
MCMarceli Do Nascimento Da Conceicao
Marceli Do Nascimento Da Conceicao
DPDavi Nascimento de Pina
Davi Nascimento de Pina
PPPedro Afonso de moraes Paes
Pedro Afonso de moraes Paes
Sergio Neves MonteiroSergio Neves Monteiro
Sergio Neves Monteiro
DBDaniele Cruz Bastos
Daniele Cruz Bastos
The use of mineral reinforcements in polymer matrix composites has emerged as an alternative for sustainable production, reducing waste and enhancing the physical and mechanical properties of these materials. This study investigated the impact of the melt flow index (MFI) of HDPE and the particle size of two mineral reinforcements, Bahia Beige (BB) and Rio Grande do Norte Limestone (CRN), on the composites. All composites were processed via extrusion, followed by injection, with the addition of 30 wt.% reinforcement. Chemical analyses revealed similar compositions with high CaO content for both minerals, while X-ray diffraction (XRD) identified predominantly calcite, dolomite, and quartz phases. Variations in the MFI, reinforcement type, and particle size showed a minimal influence on composite properties, supported by robust statistical analyses that found no significant differences between groups. Morphological analysis indicated that composites with lower MFI exhibited less porous structures, whereas larger particles of BB and CRN formed clusters, affecting impact resistance, which was attributed to poor interfacial adhesion.

1 January 2022 in Polímeros
Verified
Journal Article
Open access
GCGabriella Neto Chagas
Gabriella Neto Chagas
MBMaiccon Martins Barros
Maiccon Martins Barros
ALAriadne Gonçalves de Leão
Ariadne Gonçalves de Leão
NTNeyda de la Caridad Om Tapanes
Neyda de la Caridad Om Tapanes
RRROBERTO CARLOS Ribeiro
ROBERTO CARLOS Ribeiro
DBDaniele Cruz Bastos
Daniele Cruz Bastos

3 July 2014 in Acta Scientiae et Technicae
Verified
Journal Article
Open access
LELauren Espinosa
Lauren Espinosa
NTNeyda de la Caridad Om Tapanes
Neyda de la Caridad Om Tapanes
DGDonato Alexandre Gomes
Donato Alexandre Gomes
YCYordanka Reyes Cruz
Yordanka Reyes Cruz

27 August 2020 in Revista Univap
Verified
Journal Article
Closed access
PDF file
SRSusan Melo da Rocha
Susan Melo da Rocha
ECElisa Pereira de Carvalho
Elisa Pereira de Carvalho
NSNathalia Cerqueira da Silva
Nathalia Cerqueira da Silva
RPRodrigo França Pacheco
Rodrigo França Pacheco
LFLaerte Soares Filho
Laerte Soares Filho
ASAna Isabel De Carvalho Santana
Ana Isabel De Carvalho Santana
As ligas de alumínio vêm sendo aplicadas na indústria de transporte e automobilística em virtude de propriedades tais como leveza e resistência à corrosão. Os biocombustíveis estão entre as alternativas avaliadas para substituir os combustíveis fósseis, pois apresentam como vantagem a biodegradabilidade e são provenientes de fontes renováveis. Esse trabalho realizou uma avaliação da resistência a corrosão de ligas de alumínio em biodiesel de soja, com diferentes concentrações de ácido oleico através de ensaios gravimétricos. Observou-se que a taxa de corrosão das ligas em biodiesel de soja puro é mais significativa nas primeiras horas de imersão, e apresenta uma significativa diminuição em tempos mais longos. Amostras de biodiesel de soja com teor de 20% de ácido oleico aumentaram a corrosão da liga de alumínio 6061 em comparação com amostras imersas em biodiesel puro.