This article presents a comprehensive study on the physical, mechanical, thermal, and chemical properties of polypropylene (PP) composites reinforced with hemp fibers (HF) and compatibilized with maleic anhydride (MAPP). The composites were processed using a twin-screw extruder, followed by hot compression at 190 °C. Subsequently, the composites were analyzed using Izod impact and Shore D hardness tests to evaluate their mechanical properties. Thermal properties were investigated through differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), while X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR) were employed to study their chemical properties. Additionally, a statistical analysis was conducted to compare the average results of the impact and hardness tests. XRD analysis revealed that the addition of HF and MAPP led to the disappearance of peaks corresponding to the beta phase in pure PP. Hemp fibers exhibited an impressive crystallinity of 82.10%, surpassing other natural fibers, and had a significant molecular orientation angle (MFA) of 6.06°, making them highly desirable for engineering applications. The crystallite size was observed to be relatively large, at 32.49 nm. FTIR analysis demonstrated strong interactions between the fiber, compatibilizing agent, and polymer matrix. TGA tests showed that the addition of 5 and 10 wt.% MAPP resulted in complete degradation of the composites, similar to pure PP. DSC analyses indicated a reduction in crystallinity (Xc) due to the incorporation of HF and MAPP. Shore D hardness tests revealed an increase in hardness with the addition of 5 wt.% MAPP, while a steep decline in this property was observed with 10 wt.% MAPP. In terms of impact resistance, fractions of 3 and 5 wt.% MAPP in the composites exhibited improved performance compared to the pure polymer. Analysis of variance (ANOVA) was employed to ensure the statistical reliability of the mechanical test results. This comprehensive study sheds light on the diverse properties of PP composites reinforced with hemp fibers and compatibilized with MAPP, emphasizing their potential as sustainable materials for engineering applications. The results contribute to the understanding of the structural and functional aspects of these composites, guiding future research and developments in the field.
The Amazon rainforest, spanning multiple countries in South America, is the world’s largest equatorial expanse, housing a vast array of relatively unknown plant and animal species. Encompassing the planet’s greatest flora, the Amazon offers a tremendous variety of plants from which natural lignocellulosic fibers (NLFs) can be extracted. In this century, NLFs, which have long been utilized by indigenous populations of the Amazon, have garnered interest as potential reinforcements for composites, whether polymer- or cement-based, in various technical applications such as packaging, construction, automotive products, and ballistic armor. A comparison with synthetic materials like glass, carbon, and aramid fibers, as well as other established NLFs, highlights the cost and specific property advantages of Amazon natural fibers (ANFs). Notably, the sustainable cultivation and extraction of ANFs, as alternatives to deforestation and livestock pasture, contribute to the preservation of the Amazon rainforest. This review article provides a comprehensive examination of recent studies directly related to ANF-reinforced polymer matrix composites. The specific advantages, proposed applications, and reported challenges are highlighted, shedding light on the potential of these unique natural fibers.
The production of synthetic materials generally uses non-renewable forms of energy, which are highly polluting. This is driving the search for natural materials that offer properties similar to synthetic ones. In particular, the use of natural lignocellulosic fibers (NLFs) has been investigated since the end of 20th century, and is emerging strongly as an alternative to replace synthetic components and reinforce composite materials for engineering applications. NLFs stand out in general as they are biodegradable, non-polluting, have comparatively less CO2 emission and are more economically viable. Furthermore, they are lighter and cheaper than synthetic fibers, and are a possible replacement as composite reinforcement with similar mechanical properties. In the present work, a less known NLF from the Amazon region, the ubim fiber (Geonoma bacculifera), was for the first time physically characterized by X-ray diffraction (XRD). Fiber density was statistically analyzed by the Weibull method. Using both the geometric method and the Archimedes’ technique, it was found that ubim fiber has one of the lowest densities, 0.70–0.73 g/cm3, for NLFs already reported in the literature. Excluding the porosity, however, the absolute density measured by pycnometry was relatively higher. In addition, the crystallinity index, of 83%, microfibril angle, of 7.42–7.49°, and ubim fiber microstructure of lumen and channel pores were also characterized by scanning electron microscopy. These preliminary results indicate a promising application of ubim fiber as eco-friendly reinforcement of civil construction composite material.
The search for unexplored natural materials as an alternative to synthetic components has driven the development of novel polymeric composites reinforced with environmentally-friendly materials. Natural lignocellulosic fibers (NLFs) have been highlighted as potential reinforcement in composite materials for engineering applications. In this work, a less known Amazonian fiber, the ubim fiber (Geonoma baculifera), is investigated as a possible reinforcement in epoxy composites and was, for the first time, thermally characterized by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Additionally, its chemical structure was elucidated by Fourier transform infrared spectroscopy (FTIR). Ballistic tests were also performed against the threat of a 7.62 mm high-speed lead projectile. The results were statistically analyzed by the Weibull statistical analysis method. FTIR analysis showed the functional groups normally found for NLFs highly rich in cellulose, hemicellulose, and lignin. The TGA/DTG results showed the onset of thermal degradation for the composites (325~335 °C), which represents better thermal stability than isolated ubim fiber (259 °C), but slightly lower than that of pure epoxy (352 °C). The DSC results of the composites indicate endothermic peaks between 54 and 56 °C, and for the ubim fibers, at 71 °C. Ballistic tests revealed higher energy absorption in composites with lower fiber content due to the more intense action of the brittle fracture mechanisms of the epoxy resin, which tended to dissipate more energy. These failure mechanisms revealed the presence of river marks, cracks, and broken fibers with a detachment interface. These results may contribute to the production of ubim fiber-reinforced composites in engineering applications, such as ballistic armors.
Natural lignocellulosic fibers (NLFs) have shown a great potential as reinforcements in composites in recent decades. Among other reasons, environmental concerns and the depletion of oil reserves justify research on natural composites as they offer an environmentally friendly alternative and align with the principles of sustainable development. Among the plethora of NLFs available in nature, the ubim fiber (Geonoma baculifera) has not yet been investigated as a reinforcement for composites in potential engineering applications. Therefore, this study evaluates, for the first time, the mechanical properties of epoxy composites with 10, 20, and 30 vol% of ubim fibers. These properties were assessed through Izod impact, tensile and flexural tests as well as dynamic mechanical analysis (DMA). The data were statistically analyzed using the ANOVA method. Scanning electron microscopy (SEM) analysis indicated a transition from a purely brittle fracture mechanism to a ductile-brittle combination as the fiber volume in the composite increased. Tensile tests of the composites demonstrated an increasing trend in strength and elastic modulus with fiber volume. The results of the flexural tests also displayed a similar trend in strength and elasticity modulus for the composites. The results of DMA tests showed that composite materials with a 30 vol% of ubim fibers exhibited a high glass transition temperature and a low tan δ value, suggesting higher stiffness of this composite compared to others. Overall, the results indicated that the incorporation of 30 vol% ubim fibers into the composites significantly improved their mechanical properties compared to other tested fiber fractions. Additionally, their functional characteristics, such as simplicity in the manufacturing process, low cost, and excellent strength-to-weight ratio, make these composites particularly suitable for applications in sectors such as the automotive industry, construction panels, and packaging. These factors contribute to the development of an efficient, sustainable, recyclable and environmentally friendly composite.
This study investigates the ballistic performance and energy dissipation mechanisms of epoxy composites reinforced with raffia fabric at fiber volume fractions of 10%, 20%, and 30% under 9 mm full metal jacket projectile impact. Ballistics tests were conducted to determine impact and residual velocities, absorbed energy, absorption efficiency, equivalent ballistic limit, and momentum reduction. All tests were performed at similar impact velocities (≈433 m/s), corresponding to an incident energy of approximately 750 J. The results revealed a clear inverse relationship between raffia content and energy absorption capability. The ER10 composite exhibited the highest performance, with an absorbed energy of 176.7 ± 9.7 J, absorption efficiency of 23.5 ± 0.9%, and momentum reduction of 0.1253 ± 0.0053. Increasing the fiber fraction to 20% (ER20) and 30% (ER30) led to progressive reductions in absorbed energy to 119.7 ± 2.7 J and 77.7 ± 9.0 J, with efficiencies of 15.95 ± 0.26% and 10.30 ± 1.12%, respectively. The residual velocity increased from 379.3 ± 2.5 m/s (ER10) to 397.0 ± 2.1 m/s (ER20) and 411.1 ± 1.6 m/s (ER30). One-way ANOVA detected statistically significant differences in absorbed energy and absorption efficiency among the different fiber volume fractions (p < 0.001). The results demonstrate a trade-off between stiffness and toughness and indicate that raffia-reinforced composites can play complementary roles in sustainable multilayered armor systems.