Pedro Henrique Poubel Mendonça da Silveira

Dr. Pedro Henrique Poubel Mendonça da Silveira

Military Institute of Engineering, Rio de Janeiro, Brazil
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 June 2021 in Polymers
Verified
Journal Article
Open access
PDF file
TSThuane Teixeira da Silva
Thuane Teixeira da Silva
Pedro Henrique Poubel Mendonça da SilveiraPedro Henrique Poubel Mendonça da Silveira
Pedro Henrique Poubel Mendonça da Silveira
MRMatheus Ribeiro
Matheus Ribeiro
MLMauricio Ferrapontoff Lemos
Mauricio Ferrapontoff Lemos
ASAna Paula da Silva
Ana Paula da Silva
LNLucio Nascimento
Lucio Nascimento
Kenaf (Hibiscus cannabinus L.) is one of the most investigated and industrially applied natural fibers for polymer composite reinforcement. However, relatively limited information is available regarding its epoxy composites. In this work, both thermal and chemical properties were, for the first time, determined in kenaf fiber reinforced epoxy matrix composites. Through XRD analysis, a microfibrillar angle of 7.1° and crystallinity index of 44.3% was obtained. The FTIR analysis showed the functional groups normally found for natural lignocellulosic fibers. TMA analysis of the composites with 10 vol% and 20 vol% of kenaf fibers disclosed a higher coefficient of thermal expansion. The TG/DTG results of the epoxy composites revealed enhanced thermal stability when compared to plain epoxy. The DSC results corroborated the results obtained by TGA, which indicated a higher mass loss in the first stage for kenaf when compared to its composites. These results might contribute to kenaf fiber composite applications requiring superior performance.

19 April 2025 in Polymers
Verified
Journal Article
Open access
PDF file
AAAry Machado de Azevedo
Ary Machado de Azevedo
Pedro Henrique Poubel Mendonça da SilveiraPedro Henrique Poubel Mendonça da Silveira
Pedro Henrique Poubel Mendonça da Silveira
TLThomaz Jacintho Lopes
Thomaz Jacintho Lopes
OCOdilon Leite Barbosa da Costa
Odilon Leite Barbosa da Costa
Sergio Neves MonteiroSergio Neves Monteiro
Sergio Neves Monteiro
André Ben-Hur da FigueiredoAndré Ben-Hur da Figueiredo
André Ben-Hur da Figueiredo
This article explores the foundational principles of ionizing radiation and provides a comprehensive overview of its impact on thermoplastic polymers. Ionizing radiation, encompassing gamma rays, X-rays, and electron beams, has been extensively studied due to its capacity to alter the molecular structure of polymers. These changes enable advancements in various applications by promoting molecular crosslinking, controlled degradation, molecular grafting, and crystallinity adjustments. The article delves into the fundamental mechanisms of radiation thermoplastic polymer interactions, including ionization, electronic excitation, and free radical formation. It highlights how these processes lead to structural transformations that enhance the physical, thermal, and mechanical properties of thermoplastic polymers. Factors such as radiation type, absorbed doses, temperature, and environmental conditions are discussed in the context of their role in controlling these modifications. Key practical applications are identified across fields such as medicine, food packaging, aerospace, and industry. Examples include the production of sterilizable medical devices, enhanced food packaging for longer shelf life, and radiation-resistant materials for the aerospace and nuclear sectors. Despite its many advantages, the article also emphasizes challenges such as process variability, polymer sensitivity to radiation, and standardization difficulties. The review underscores emerging research directions, including optimizing irradiation parameters and integrating advanced characterization techniques like Fourier Transform Infrared Spectroscopy (FT-IR) and X-ray diffraction (XRD). The development of new polymer blends and composites, designed for irradiation-induced property enhancement, represents a promising area of innovation.

1 August 2023 in Polymers
Verified
Journal Article
Open access
PDF file
Pedro Henrique Poubel Mendonça da SilveiraPedro Henrique Poubel Mendonça da Silveira
Pedro Henrique Poubel Mendonça da Silveira
MSMônica Cristina Celestino Santos
Mônica Cristina Celestino Santos
YCYago Soares Chaves
Yago Soares Chaves
MRMatheus Ribeiro
Matheus Ribeiro
BMBelayne Zanini Marchi
Belayne Zanini Marchi
DBDaniele Cruz Bastos
Daniele Cruz Bastos
This article presents a comprehensive study on the physical, mechanical, thermal, and chemical properties of polypropylene (PP) composites reinforced with hemp fibers (HF) and compatibilized with maleic anhydride (MAPP). The composites were processed using a twin-screw extruder, followed by hot compression at 190 °C. Subsequently, the composites were analyzed using Izod impact and Shore D hardness tests to evaluate their mechanical properties. Thermal properties were investigated through differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), while X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR) were employed to study their chemical properties. Additionally, a statistical analysis was conducted to compare the average results of the impact and hardness tests. XRD analysis revealed that the addition of HF and MAPP led to the disappearance of peaks corresponding to the beta phase in pure PP. Hemp fibers exhibited an impressive crystallinity of 82.10%, surpassing other natural fibers, and had a significant molecular orientation angle (MFA) of 6.06°, making them highly desirable for engineering applications. The crystallite size was observed to be relatively large, at 32.49 nm. FTIR analysis demonstrated strong interactions between the fiber, compatibilizing agent, and polymer matrix. TGA tests showed that the addition of 5 and 10 wt.% MAPP resulted in complete degradation of the composites, similar to pure PP. DSC analyses indicated a reduction in crystallinity (Xc) due to the incorporation of HF and MAPP. Shore D hardness tests revealed an increase in hardness with the addition of 5 wt.% MAPP, while a steep decline in this property was observed with 10 wt.% MAPP. In terms of impact resistance, fractions of 3 and 5 wt.% MAPP in the composites exhibited improved performance compared to the pure polymer. Analysis of variance (ANOVA) was employed to ensure the statistical reliability of the mechanical test results. This comprehensive study sheds light on the diverse properties of PP composites reinforced with hemp fibers and compatibilized with MAPP, emphasizing their potential as sustainable materials for engineering applications. The results contribute to the understanding of the structural and functional aspects of these composites, guiding future research and developments in the field.

16 October 2022 in Polymers
Verified
Journal Article
Open access
PDF file
MRMatheus Ribeiro
Matheus Ribeiro
Pedro Henrique Poubel Mendonça da SilveiraPedro Henrique Poubel Mendonça da Silveira
Pedro Henrique Poubel Mendonça da Silveira
FBFábio Braga
Fábio Braga
Sergio Neves MonteiroSergio Neves Monteiro
Sergio Neves Monteiro
As destructive power of firearms raises over the years, ballistic armors are in continuous need of enhancement. For soft armors, this improvement is invariably related to the increase of stacked layers of high-strength fiber fabrics, which potentially restrains wearer mobility. A different solution was created in the early 2000s, when a research work proposed a new treatment of the ballistic panels with non-Newtonian colloidal shear thickening fluid (STF), in view of weight decreasing with strength reinforcement and cost-effective production. Since then, databases reveal a surge in publications generally pointing to acceptable features under ballistic impact by exploring different conditions of the materials adopted. As a result, several works have not been covered in recent reviews for a wider discussion of their methodologies and results, which could be a barrier to a deeper understanding of the behavior of STF-impregnated fabrics. Therefore, the present work aims to overview the unexplored state-of-art on the effectiveness of STF addition to high-strength fabrics for ballistic applications to compile achievements regarding the ballistic strength of this novel material through different parameters. From the screened papers, SiO2, Polyethylene glycol (PEG) 200 and 400, and Aramid are extensively being incorporated into the STF/Fabric composites. Besides, parameters such as initial and residual velocity, energy absorbed, ballistic limit, and back face signature are common metrics for a comprehensive analysis of the ballistic performance of the material. The overview also points to a promising application of natural fiber fabrics and auxetic fabrics with STF fluids, as well as the demand for the adoption of new materials and more homogeneous ballistic test parameters. Finally, the work emphasizes that the ballistic application for STF-impregnated fabric based on NIJ standards is feasible for several conditions.

2 September 2022 in Polymers
Verified
Journal Article
Open access
PDF file
TSThuane Teixeira da Silva
Thuane Teixeira da Silva
Pedro Henrique Poubel Mendonça da SilveiraPedro Henrique Poubel Mendonça da Silveira
Pedro Henrique Poubel Mendonça da Silveira
André Ben-Hur da FigueiredoAndré Ben-Hur da Figueiredo
André Ben-Hur da Figueiredo
Sergio Neves MonteiroSergio Neves Monteiro
Sergio Neves Monteiro
MRMatheus Ribeiro
Matheus Ribeiro
LNLucio Nascimento
Lucio Nascimento
Several industry sectors have sought to develop materials that combine lightness, strength and cost-effectiveness. Natural lignocellulosic natural fibers have demonstrated to be efficient in replacing synthetic fibers, owing to several advantages such as costs 50% lower than that of synthetic fibers and promising mechanical specific properties. Polymeric matrix composites that use kenaf fibers as reinforcement have shown strength increases of over 600%. This work aims to evaluate the performance of epoxy matrix composites reinforced with kenaf fibers, by means of dynamic-mechanical analysis (DMA) and ballistic test. Through DMA, it was possible to obtain the curves of storage modulus (E′), loss modulus (E″) and damping factor, Tan δ, of the composites. The variation of E′ displayed an increase from 1540 MPa for the plain epoxy to 6550 MPa for the 30 vol.% kenaf fiber composites, which evidences the increase in viscoelastic stiffness of the composite. The increase in kenaf fiber content induced greater internal friction, resulting in superior E″. The Tan δ was considerably reduced with increasing reinforcement fraction, indicating better interfacial adhesion between the fiber and the matrix. Ballistic tests against 0.22 caliber ammunition revealed similar performance in terms of both residual and limit velocities for plain epoxy and 30 vol.% kenaf fiber composites. These results confirm the use of kenaf fiber as a promising reinforcement of polymer composites for automotive parts and encourage its possible application as a ballistic armor component.

8 March 2023 in Eng
Verified
Journal Article
Open access
PDF file
RJRaí Felipe Pereira Junio
Raí Felipe Pereira Junio
Pedro Henrique Poubel Mendonça da SilveiraPedro Henrique Poubel Mendonça da Silveira
Pedro Henrique Poubel Mendonça da Silveira
Lucas NeubaLucas Neuba
Lucas Neuba
Sergio Neves MonteiroSergio Neves Monteiro
Sergio Neves Monteiro
LNLucio Nascimento
Lucio Nascimento
Auxetic structures (AXSs) are a novel class of materials with unique mechanical deformation behavior associated with negative Poisson ratio. The combination of AXS configurations with various types of materials has unveiled a wide field of applications, including military high-velocity protection against explosions and ballistic projectiles. However, the characteristic geometric re-entrant model of AXSs imposes limitations and difficulties when using conventional manufacturing methods to assemble the structure lattice. Additive manufacturing (AM) has recently been explored as a more efficient and cost-effective method to fabricate AXSs, regardless of the type of material. This review paper focuses on the development and applications of AM processed AXSs. The review highlights the significance and great potential for this class of materials that can be produced relatively fast and at a low cost. The advantages of AXS/AM are expected to extend to important industrial sectors, particularly for military ballistic armor, where the feasibility for products with improved properties is critical. The use of AM offers a viable solution to overcome the difficulties associated with the conventional manufacturing methods, and thus offers greater design flexibility, cost efficiency, and reduced material waste. This review paper aims to contribute to the understanding of the current state-of-the-art and future research prospects for the production and applications of AXS/AM.