This paper presents a study on form-finding of four-stage class one self-equilibrated spine biotensegrity models. Advantageous features such as slenderness and natural curvature of the human spine, as well as the stabilizing network that consists of the spinal column and muscles, were modeled and incorporated in the mathematical formulation of the spine biotensegrity models. Form-finding analysis, which involved determination of independent self-equilibrium stress modes using generalized inverse and their linear combination, was carried out. Form-finding strategy for searching the self-equilibrated models was studied through two approaches: application of various combinations of (1) twist angles and (2) nodal coordinates. A total of three configurations of the spine biotensegrity models with different sizes of triangular cell were successfully established for the first time in this study. All members in the spine biotensegrity models satisfied the assumption of linear elastic material behavior. With the established spine biotensegrity model, the advantageous characteristics of flexibility and versatility of movement can be further studied for potential application in deployable structures and flexible arm in the robotic industry.
This paper evaluates the mechanical performances of green engineered cementitious composites (ECC) by means of compressive strength and flexural behaviour. Green ECC made of cement, ground granulated blast-furnace slag (GGBS), river sand or recycled concrete fine (RCF), polypropylene (PP) fiber, water and superplasticizer (SP) was employed in this study. Compression test result implies that green ECC incorporating either sieved river sand or sieved RCF (below 600 μm) in series G60 and G70 exhibited greater compressive strength compared with green ECC with unsieved river sand. In series G80, compressive strength of green ECC was not affected by RCF content. Flexural stress-mid deflection curves demonstrated that all green ECC specimens performed more ductile compared to normal concrete as they undergone large deformation capacity after the first cracking strength. Both compression and flexural tests suggested that mixture G80SRCF0.4 containing large amount of sieved RCF and least amount of cement is the best green ECC mixture in this study.
8 November 2018 in IOP Conference Series: Materials Science and Engineering
This paper investigates the mechanical properties of engineered cementitious composites (ECC) in terms of compressive strength and flexural behaviour. A new version of ECC made of cement, ground granulated blast-furnace slag (GGBS), local sand, polypropylene (PP) fibers, water and superplasticizer (SP) was employed in this study. Few series of ECC mixtures were designed, cast, and tested in compression and flexural after 28 days of curing. The effect of the fiber content and sand content were studied in different cement-GGBS combination. Compression test results indicated that all ECC mixtures obtained at least 1.8 times compressive strength compared to normal concrete. They also demonstrated more ductile flexural behavior compared to normal concrete from three-point bending test. Increasing fiber content from 1.5% to 2.0% and 2.5% has negative effect on compressive strength but significantly improved modulus of toughness of ECC mixtures. The compressive strength of ECC was reduced when the sand to binder ratio adjusted to 0.4 and 0.6. The flexural behaviour of ECC was slightly improved with the increasing of sand content.