This research aimed to determine riveted carbon/epoxy composites’ mechanical performance when fabricated by resin transfer molding (RTM). As this manufacturing process is gaining importance in the aeronautics and automotive industries, assembly methods and their reliability must be studied in terms of their airworthiness and transportation implementation. The study case resumes the determination of the bearing strength of RTM-woven carbon composites for different rivet joint diameters (1/8, 5/32 and 3/16 in). The joint shear strength was obtained following the ASTM D5961 instructions, and post-failure analysis was carried out by a computerized tomography scan. A residual strength curve is provided with the results to infer the bearing strength for the riveted composites as a function of the rivet width-to-diameter ratio. A discussion of the fracture mechanism and tensile strength is carried out to assess the understanding of the riveted woven composites.
15 April 2012 in Journal of Applied Polymer Science
In order to produce gelatin-starch polymer matrix reinforced with cellulose using twin-screw extrusion and compression molding, gelatin-potato starch and gelatin-corn starch formulations were plasticized with glycerol (25% w/w) and reinforced with cellulose (0.34% w/w and 0.68% w/w dry basis) to produce flat sheets. According to the analysis of variance performed, adding TEMPO-cellulose in the formulations decreased tensile strain at yield, but increased Young's modulus depending on the type of starch used in the formulation. Scanning electron microscopy and thermogravimetric analyses showed that the formation of a polymer matrix from gelatin/potato starch/TEMPO-cellulose and gelatin/corn starch/TEMPO-cellulose was successfully achieved.