Ricardo David Araguillin

Mr. Ricardo David Araguillin


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 June 2021 in Journal of Modern Optics
Verified
Journal Article
Closed access
RARicardo David Araguillin
Ricardo David Araguillin
LBLigia Ciocci Brazzano
Ligia Ciocci Brazzano
LPLiliana Inés Perez
Liliana Inés Perez
FVFrancisco E. Veiras
Francisco E. Veiras
Sensors based on surface plasmon resonance present attractive features for the detection of narrow acoustic pulses since they can behave as quasi-point detectors. In order to detect fast ultrasound pressure waves, the system senses the intensity of the reflected beam for a fixed angle of incidence and for a fixed wavelength. Therefore, optimal conditions for Kretschmann's glass-metal-water configuration are presented. Optimization is performed by means of numerical simulations of the reflectivity curves for different low-cost metallic films with different thicknesses and angles of incidence. Zn, Ti, Cr, Al, and Cu are evaluated and compared with Au. In addition, the wavelength selection is discussed, and the oxidation effects are also briefly analysed.

1 February 2025 in Sensors
Verified
Journal Article
Open access
PDF file
RARicardo David Araguillin
Ricardo David Araguillin
AMAngel Dickerson Méndez-Cevallos
Angel Dickerson Méndez-Cevallos
CCCesar Costa-Vera
Cesar Costa-Vera
This work identifies and models the inline devices in an experimental surface-plasmon resonance spectroscopy setup to determine the system’s transfer function. This allows for the comparison of theoretical and experimental responses and the analysis of the dynamics of the components of an analyte placed on the sensor at the nanometer scale. The transfer functions of individual components, including the light source, polarizers, spectrometer, optical fibers, and the SPR sensor, were determined experimentally and theoretically. The theoretical model employed Planck’s law for the light source, manufacturer specifications for some components, and experimental characterization for others, such as the polarizers and optical fibers. The SPR sensor was modeled using characteristic matrix theory, incorporating the optical constants of the prism, gold film, chromium adhesive layer, and analyte. The combined transfer functions created a comprehensive model of the entire experimental system. This model successfully reproduced the experimental SPR spectrum with a similarity greater than 95%. The system’s operational range was also extended, constrained by the signal-to-noise ratio at the spectrum’s edges. The detailed model allows for the accurate correction of the measured spectra, which will be essential for the further analysis of nanosuspensions and molecules dissolved in liquids.



24 July 2026 in Journal of Science: Advanced Materials and Devices
Verified
Journal Article
Open access
DODevi Orozco
Devi Orozco
CCCesar Costa-Vera
Cesar Costa-Vera
Juan Molina M.Juan Molina M.
Juan Molina M.
JGJosé Luis Gonzalez
José Luis Gonzalez
RARicardo David Araguillin
Ricardo David Araguillin
Thomas CadenbachThomas Cadenbach
Thomas Cadenbach

18 December 2024 in Preprints.org
Verified
Preprint
Open access
PDF file
RARicardo David Araguillin
Ricardo David Araguillin
AMAngel Dickerson Méndez-Cevallos
Angel Dickerson Méndez-Cevallos
CCCesar Costa-Vera
Cesar Costa-Vera
This work identifies and models the inline devices in an experimental surface plasmon resonance spectroscopy setup to determine the system’s transfer function. This allows for the comparison of theoretical and experimental responses and the analysis of the dynamics of the components of an analyte placed on the sensor at the nanometer scale. The transfer functions of individual components, including the light source, polarizers, spectrometer, optical fibers, and the SPR sensor, were determined experimentally and theoretically. The theoretical model employed Planck’s law for the light source, manufacturer specifications for some components, and experimental characterization for others, such as the polarizers and optical fibers. The SPR sensor was modeled using characteristic matrix theory, incorporating the optical constants of the prism, gold film, chromium adhesive layer, and analyte. The combined transfer functions created a comprehensive model of the entire experimental system. This model successfully reproduced the experimental SPR spectrum with a similarity greater than 90%. The system’s operational range was also extended from 400-700 nm to 400-1000 nm, constrained by the signal-to-noise ratio at the spectrum’s edges. The detailed model allows accurate correction of the measured spectra, which will be essential for further analysis of nanosuspensions and molecules dissolved in liquids.