This paper investigates the problem of fault detection and reconstruction in direct current microgrids (DC MGs) with nonlinear loads. First, a state-space representation of the DC MG with nonlinear constant power loads (CPLs) is obtained. The faults in components, actuators, and sensors in a DC MG system are modeled by using additive terms in the state-space and measurement equations. A novel robust nonlinear detector is then proposed to estimate and reconstruct the faults. The proposed detector deploys a sliding mode technique and a polytopic linear parameter varying (LPV) approach. The proposed approach utilizes the robustness and simplicity offered by the sliding mode and polytopic LPV approaches to provide a simple, but effective, detector. By employing the Lyapunov stability theory, sufficient detector design conditions are derived in terms of linear matrix inequalities (LMIs) which are numerically solved by convex optimization techniques. The proposed approach is experimentally tested on a practical DC MG benchmark connected to a CPL. Furthermore, the results are compared with other state-of-the-art methods.
6 January 2020 in Journal of Vibration and Control
Appearing faults in a practical system is dispensable, and if it is not compensated, it results in poor system performance or even dysfunction of the system. The fault detection has become a promising challenging issue to guarantee the safety and reliability of systems. In this paper, a novel fuzzy-based sliding mode observer for the simultaneous actuator and sensor fault reconstruction of nonlinear systems subjected to external disturbance is proposed. The proposed approach employs the Takagi-Sugeno fuzzy model, sliding mode observer and non-quadratic Lyapunov function. First, by filtering the system output, a fictitious system whose actuator faults are the original actuator and sensor faults is constructed. Then, by considering the performance criteria, the effect of disturbance on the state estimations is minimized. It is proved that the estimations asymptotically converge to their actual values for non-perturbed systems. In the process of designing the observer gains, some transformation matrices are obtained by solving linear matrix inequalities. The proposed approach has some superiority over the existing methods. First, considering the non-quadratic Lyapunov function leads to relaxed results and good estimation performance. Second, using the sliding mode observer makes the proposed approach insensitive to the uncertainties and unknown inputs and determines the shape and size of the fault. Third, assuming the premise variables are immeasurable makes the presented approach more applicable. In conclusion, two practical systems are considered and simulation results illustrate the merits of the proposed approach in comparison with the recent methods from the fast and precise fault detection performance viewpoints.
This paper proposes a Takagi–Sugeno (TS) fuzzy sliding mode observer (SMO) for simultaneous actuator and sensor fault reconstruction in a class of nonlinear systems subjected to unknown disturbances. First, the nonlinear system is represented by a TS fuzzy model with immeasurable premise variables. By filtering the output of the TS fuzzy model, an augmented system whose actuator fault is a combination of the original actuator and sensor faults is constructed. An performance criteria is considered to minimize the effect of the disturbance on the state estimations. Then, by using two further transformation matrices, a non-quadratic Lyapunov function (NQLF), and fmincon in MATLAB as a nonlinear optimization tool, the gains of the SMO are designed through the stability analysis of the observer. The main advantages of the proposed approach in comparison to the existing methods are using nonlinear optimization tools instead of linear matrix inequalities (LMIs), utilizing NQLF instead of simple quadratic Lyapunov functions (QLF), choosing SMO as the observer, which is robust to the uncertainties, and assuming that the premise variables are immeasurable. Finally, a practical continuous stirred tank reactor (CSTR) is considered as a nonlinear dynamic, and the numerical simulation results illustrate the superiority of the proposed approach compared to the existing methods.
Precision motion control is essential for the reliable and efficient operation of industrial and autonomous systems. This article presents an adaptive neural network (NN) controller that achieves high-accuracy trajectory tracking and disturbance rejection in the presence of nonlinear effects, such as cogging and friction forces. The key contribution lies in incorporating a history-of-error learning mechanism into the NN objective function, enabling the controller to adapt based on both instantaneous and past tracking dynamics. This temporal formulation enhances learning efficiency and disturbance suppression compared to conventional instantaneous-error methods. The controller employs a single-layer feedforward NN to estimate unknown dynamics, with a modified backpropagation algorithm and e-modification ensuring stable weight adaptation. A Lyapunov-based stability analysis is presented that guarantees bounded tracking errors and weight convergence. The resulting control law achieves robust real-time implementation without compromising computational efficiency. Experimental results on a cylindrical robot subjected to friction and cogging torque disturbances show over 60% improvement in tracking accuracy and up to 40% enhancement in disturbance rejection relative to NN and proportional integral derivative (PID) baselines. These results confirm the effectiveness of the proposed history-enhanced adaptive neural control framework for precision motion systems.
The increasing penetration of inverter-based resources has significantly reduced system inertia, motivating the emergence of Fast Frequency Response (FFR) as a dedicated ancillary service. Existing methods for enabling wind power systems to deliver FFR universally treat the wind farm as a single equivalent turbine under uniform wind conditions, an assumption that is invalid in real large-scale wind farms where heterogeneous turbine types, rated capacities, inertia constants, and spatially non-uniform wind speed distributions render uniform allocation strategies suboptimal or operationally unsafe. This paper proposes a centralized wind farm-level FFR control framework that coordinates heterogeneous wind turbine generators (WTGs) and supercapacitor energy storage systems (SCESSs) through a prioritized two-tier dispatch hierarchy, in which SCESSs are assigned the highest dispatch priority and WTGs are engaged only when aggregate storage capacity is insufficient. A constrained optimization problem is formulated to allocate the individual FFR contribution of each WTG by minimizing the total kinetic energy extracted from the wind farm, while enforcing torque, electrical power, and rotor speed constraints for every unit with respect to turbine type, inertia constant, and prevailing wind condition. A coordinated rotor speed recovery strategy further eliminates secondary frequency disturbances during the post-FFR transition. The proposed framework is validated on a 138 MW heterogeneous wind farm simulation model comprising both Doubly-Fed Induction Generator and Permanent Magnet Synchronous Generator units interconnected to a modified IEEE 14-bus test system. The proposed method achieves a 38.85% improvement in frequency nadir relative to a baseline with no FFR provision, outperforming all investigated state-of-the-art approaches, while reducing total kinetic energy extraction from the wind turbine generators and eliminating secondary frequency disturbances during the post-FFR recovery phase.