Sapunaru Valerica Olga

Dr. Sapunaru Valerica Olga

Department of Chemistry and Chemical Engineering, Ovidius University, Constanţa, Romania
orcid
-

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 January 2024 in Fuels
Verified
Journal Article
Open access
PDF file
Ancaelena SterpuAncaelena Sterpu
Ancaelena Sterpu
BSBianca Georgiana Simedrea
Bianca Georgiana Simedrea
CTCHIS TIMUR-VASILE
CHIS TIMUR-VASILE
SOSapunaru Valerica Olga
Sapunaru Valerica Olga
Biodiesel has emerged as a progressively widespread and significant alternative to traditional diesel fuel within the transportation sector. Despite its growing popularity, the issue of corrosive tendencies upon interaction with both moving and static components of diesel engines and fuel systems poses a serious concern. This research endeavors to assess the corrosion characteristics of materials commonly found in automotive fuel systems when exposed to various blends of rapeseed oil biodiesel and diesel. The study involved static immersion tests, lasting 3360 h at room temperature, using B0, B20, B40, B60, B80, and B100 fuels. Copper, brass, aluminum, zinc, and stainless steel plate samples were subjected to these tests. The evaluation at the conclusion of the study included weight loss measurements, corrosion rate calculations, and observation of changes in the exposed metal surfaces. Surface morphology was scrutinized using a Bresser LCD MICRO 5MP digital microscope. Additionally, the total acid number (TAN) was employed to assess alterations in fuel acidity before and after the immersion tests.

15 February 2023 in Energies
Verified
Journal Article
Open access
PDF file
SOSibel (Geacai) Osman
Sibel (Geacai) Osman
SOSapunaru Valerica Olga
Sapunaru Valerica Olga
Ancaelena SterpuAncaelena Sterpu
Ancaelena Sterpu
CTCHIS TIMUR-VASILE
CHIS TIMUR-VASILE
Claudia Irina KONCSAGClaudia Irina KONCSAG
Claudia Irina KONCSAG
Bioethanol and dimetyl carbonate (DMC) are considered alternative fuels and additives to the synthesis compounds used now, since bioethanol is a biofuel and dimethyl carbonate (DMC) is non-toxic, biodegradable and can be produced in a cleaner way. In this study, the effect of adding dimethyl carbonate (DMC) and ethanol to gasoline on the volatility was investigated. The volatility was the main goal of this research but also, the effect on the antiknock properties was studied. Mixtures of gasoline with DMC or with bioethanol were prepared in different proportions of additive: 3%, 6% and 9% v/v. Additionally, mixtures with 3% v/v ethanol plus 3% or 6% v/v DMC, and3% DMC plus 6% v/v ethanol were prepared. For the volatility evaluation, the ASTM distillation curve and vapor pressure of these mixtures were determined experimentally in order to predict the performance of the resulting fuels. When adding oxygenated compounds, the increase in vapor pressure was proportional to the additive quantity. Additionally, modifications of the ASTM distillation curves were observed, with these indicating the formation of minimum boiling point azeotropes and the corresponding increase in volatility, with good effect on the ease of ignition in the engine. Based on the experimental results, the vapor lock index VLI, drivability index DI and vapor–liquid ratio temperature T(V/L=20) were calculated to quantify the volatility. The experimental results showed that gasoline mixtures with these oxygenated compounds show a significant increase in antiknock properties. Thus, for mixtures with ethanol, the research octane number (RON) increases by up to 2.2 units and the motor octane number (MON) increases by up to 1.2 units. Gasoline mixtures with DMC have another behavior: RON increased by up to 1.5 units, while the MON value increased by up to 2.5 units. For an initial gasoline with RON = 94.7 and MON 84.7, these increases are important and make the difference by exceeding the RON = 95 limit. Adding dimethyl carbonate to gasoline–ethanol blends improves the sensitivity of the fuel.

8 April 2025 in Fire
Verified
Journal Article
Open access
PDF file
Grigore CicanGrigore Cican
Grigore Cican
VSValentin Silivestru
Valentin Silivestru
RMRadu Mirea
Radu Mirea
SOSibel (Geacai) Osman
Sibel (Geacai) Osman
FPFlorin Popescu
Florin Popescu
RERazvan Ene
Razvan Ene
This study examines the impact of alcohol blends on the performance and emissions of aviation micro-turbojet engines. Thus, propanol, butanol, pentanol, hexanol, heptanol, and octanol were tested at 10%, 20%, and 30% concentrations and mixed with Jet A, as well as with an additional 5% heptanol blend to preserve base fuel properties, to fuel a JetCat P80 micro-turbojet. Physicochemical properties such as density, viscosity, and elemental composition were analyzed before engine testing. Carbon dioxide (CO2) emissions from 1 kg of fuel combustion varied, with propanol yielding the lowest at 3.02 kg CO2 per kg of fuel and octanol yielding the highest at 3.22 kg CO2 per kg of fuel. The following results were obtained: alcohol blends lowered exhaust gas temperature by up to 7.5% at idle and intermediate thrust but slightly increased it at maximum power; fuel mass flow increased with alcohol concentration, peaking at 20.4% above Jet A for 30% propanol; and thrust varied from −4.92% to +7.4%. While specific fuel consumption increased by up to 12.8% for propanol, thermal efficiency declined by 1.8–5.6% and combustion efficiency remained within ±2% of Jet A. Butanol and octanol emerged as viable alternatives, balancing emissions reduction and efficiency. The results emphasize the need for an optimal trade-off between environmental impact and engine performance.

30 May 2024 in Lubricants
Verified
Journal Article
Open access
PDF file
SOSapunaru Valerica Olga
Sapunaru Valerica Olga
Ancaelena SterpuAncaelena Sterpu
Ancaelena Sterpu
CVCyrille A. Vodounon
Cyrille A. Vodounon
JNJack Nasr
Jack Nasr
CDCristina Dusescu-Vasile
Cristina Dusescu-Vasile
Claudia Irina KONCSAGClaudia Irina KONCSAG
Claudia Irina KONCSAG
Biobased greases are derived from renewable resources, are considered more environmentally friendly, and offer comparable performance to petroleum-based greases. In this study, lubricating greases from frying cooking oils were prepared, thus valorizing waste in order to obtain sustainable and environmentally friendly products. Twelve batches (500 g each) were produced from sunflower and palm frying oils, with 20% by weight calcium/lithium stearate soaps prepared in situ and filled with 15 wt.% cellulose or lignin sulfate. The greases were rheologically characterized. Their consistency was assessed by the penetration test performed before and after working the greases. Dropping point determinations offered information about the stability at higher temperatures, and oil bleeding tests were performed. The average values of the friction coefficient (COF), the contact resistance, and the wear scar diameter were measured through mechanical tests. The greases prove to be comparable to those obtained from mineral oils, with good rheological properties, soft consistency, and good antiwearing behavior, e.g., in open or total-loss lubricating systems, like in open gears and certain food processing machinery; they are thermally stable andprone touse in low-loading working mechanisms.

16 April 2024 in Preprints.org
Verified
Preprint
Open access
PDF file
SOSapunaru Valerica Olga
Sapunaru Valerica Olga
Ancaelena SterpuAncaelena Sterpu
Ancaelena Sterpu
CVCyrille Alode Vodounon
Cyrille Alode Vodounon
JNJack Nasr
Jack Nasr
CDCristina Dusescu-Vasile
Cristina Dusescu-Vasile
Claudia Irina KONCSAGClaudia Irina KONCSAG
Claudia Irina KONCSAG
Biobased greases are derived from renewable resources, being considered more environmentally friendly, and offering comparable performance with petroleum-based greases. In this study, lubricating greases from frying cooking oils were prepared, thus valorizing waste, in order to obtain sustainable and environmentally friendly products. 12 batches (500 g each) were produced from sunflower and palm frying oils, with 20% by weight calcium/ lithium stearate soaps prepared in situ, and additivated with 15% wt. cellulose or lignin sulphate. The greases were rheologically characterized. Their consistency was assessed by the penetration test, performed before and after working the greases. Dropping point determinations offered information about the stability at higher temperatures, and oil bleeding tests were performed. The average values of the friction coefficient (COF), the contact resistance and the wear scar diameter were measured, through mechanical tests. Additivated greases prove to be comparable with those obtained from mineral oils, with good rheological properties, soft consistency and good antiwearing behavior, e.g.in open or total- loss lubricating systems, like in open gears and certain food processing machinery; they are thermally stable, and prone for use in low-loading working mechanisms.

4 December 2021 in Processes
Verified
Journal Article
Open access
PDF file
Ana-Maria SivriuAna-Maria Sivriu
Ana-Maria Sivriu
SOSapunaru Valerica Olga
Sapunaru Valerica Olga
Ancaelena SterpuAncaelena Sterpu
Ancaelena Sterpu
RTRoxana Doinita Tirpan
Roxana Doinita Tirpan
CTCHIS TIMUR-VASILE
CHIS TIMUR-VASILE
TDTanase Dobre
Tanase Dobre
The aim of this study was to improve the quality of a vegetable oil, having in view its use as a quenchant for metallic parts in aircrafts. A process of pyrolysis under vacuum was applied to obtain a bio-oil with reduced viscosity and good quenching properties. Preliminarily, the rapeseed oil was fast pyrolyzed at temperature in the range of 300–375 °C and absolute pressure of 1 μbar. Some results such as viscosity and yields of bio-oil were obtained with a narrowing of the temperature range between 300–320 °C, for further processing. Quenching tests with bio-oils on stainless steel 25CD4 showed cooling curves closer to those of the standard mineral oil (Castrol IloquenchTM 1), by comparing them with unprocessed vegetable oil. The hardness of the steel after treatment rose from 29–30 HRC to 43–45 HRC, in accordance with requirements (35–45 HRC). Therefore, the conclusion is that bio-oils obtained by pyrolysis under vacuum are good quenchant proceeds from this study.