In this study, we propose a bidirectional chemical sensor platform based on a reconfigurable ion-sensitive field-effect transistor (R-ISFET) architecture. The device incorporates Ni-silicide Schottky barrier source/drain (S/D) contacts, enabling ambipolar conduction and bidirectional turn-on behavior for both p-type and n-type configurations. Channel polarity is dynamically controlled via the program gate (PG), while the control gate (CG) suppresses leakage current, enhancing operational stability and energy efficiency. A dual-control-gate (DCG) structure enhances capacitive coupling, enabling sensitivity beyond the Nernst limit without external amplification. The extended-gate (EG) architecture physically separates the transistor and sensing regions, improving durability and long-term reliability. Electrical characteristics were evaluated through transfer and output curves, and carrier transport mechanisms were analyzed using band diagrams. Sensor performance—including sensitivity, hysteresis, and drift—was assessed under various pH conditions and external noise up to 5 Vpp (i.e., peak-to-peak voltage). The n-type configuration exhibited high mobility and fast response, while the p-type configuration demonstrated excellent noise immunity and low drift. Both modes showed consistent sensitivity trends, confirming the feasibility of complementary sensing. These results indicate that the proposed R-ISFET sensor enables selective mode switching for high sensitivity and robust operation, offering strong potential for next-generation biosensing and chemical detection.
Understanding and controlling charge trapping is critical for achieving reliable operation of amorphous oxide semiconductor thin-film transistors (TFTs), particularly under low thermal budget conditions where defect states are not fully passivated. In this work, we investigate the charge-trapping dynamics and bias-stress stability of indium–tungsten oxide (IWO) TFTs processed at temperatures ≤ 300 °C, with an emphasis on the relationship between defect states and device reliability. Systematic bias-stress measurements reveal that IWO TFTs exhibit significantly reduced threshold-voltage shifts (ΔVth) under both positive and negative gate bias stress, accompanied by longer charge-trapping time constants (τ) and lower effective trap density (Dit) compared with conventional amorphous oxide counterparts. The stretched-exponential analysis indicates slower carrier trapping kinetics in IWO, suggesting suppressed defect activation and reduced trap-assisted charge capture. These improvements are consistent with a more stable oxygen-bonding and defect environment; the specific role of strong W–O bonding is supported by prior literature, which mitigates the formation of oxygen-vacancy-related defect states and stabilizes the amorphous structure under thermally constrained processing conditions. In addition, long-term environmental measurements demonstrate minimal degradation in electrical characteristics over extended ambient exposure, supporting the enhanced long-term environmental stability of IWO under unpassivated conditions. The results establish a direct correlation between defect-state suppression and enhanced bias-stress reliability, providing a materials-physics framework for designing oxide TFTs with improved stability under low thermal budget processing.
28 April 2026 in Japanese Journal of Applied Physics
This study introduces a complementary metal–oxide–semiconductor (CMOS)-compatible, vertically stacked dual-gate reconfigurable field-effect transistor (RFET) featuring nickel-silicide (NiSi) Schottky source/drain junctions. Two device configurations—upper program gate (UPG) and upper control gate (UCG)—were implemented. The proposed design preserves the inherent benefits of doping-free operation and low-thermal-budget fabrication while enabling ambipolar conduction and dynamic reconfigurability through PG and CG bias modulation. Separate dielectric stacks for the PG and CG facilitate material-specific optimization and enhance functional versatility. Moreover, the vertical stacking architecture improves lithography tolerance, overlay alignment, scalability, and integration density. The fabricated RFETs exhibit stable reconfigurable switching between p- and n-type configurations with distinct transfer and output characteristics. Load–resistor (L–R) and CMOS-like inverter circuits confirm complementary logic operation, displaying well-defined voltage transfer curves, rail-to-rail output, and consistent dynamic inversion behavior across varying supply voltages. Hence, the proposed RFET is a thermally efficient, fabrication-friendly, and integration-ready platform for next-generation reconfigurable semiconductor technologies.
Heterojunction engineering provides an effective route to modulate carrier transport and threshold voltage in amorphous oxide semiconductor thin-film transistors (TFTs); however, thermal processing can induce interfacial intermixing and defect redistribution, potentially obscuring the designed electronic structure. In this work, Al-doped In–Zn–Sn–O/Zn–Sn–O (AIZTO/ZTO) heterojunction channels were integrated with microwave annealing (MWA) to control the interfacial electronic structure and oxygen-related defect states while maintaining a low thermal budget. Optical and ultraviolet photoelectron spectroscopy revealed a conduction-band offset across the AIZTO/ZTO heterointerface, giving rise to a potential-well-like region that promotes interfacial carrier accumulation and transport. X-ray photoelectron spectroscopy, including depth profiling, further showed that MWA suppressed excessive cation intermixing and altered the distribution of oxygen-related bonding states across the heterointerface relative to conventional thermal annealing. Optimization of the AIZTO/ZTO thickness ratio further enabled simultaneous regulation of carrier transport and threshold voltage. The optimized microwave-annealed heterojunction TFT exhibited a near-zero threshold voltage of −0.38 V, together with a high linear field-effect mobility of 37.64 cm2 V−1 s−1 and a subthreshold swing of 202.09 mV dec−1. Furthermore, the device exhibited reduced threshold-voltage shifts of +0.52 and −1.59 V under positive and negative bias stress, respectively. These results demonstrate that microwave-controlled heterointerface engineering enables the coupled regulation of band alignment, oxygen-related defect states, and interfacial cation mixing, providing a materials-engineering strategy for mitigating the mobility–threshold-voltage–stability trade-off in oxide TFTs.