21 August 2026 in SSRN Electronic Journal
Heterojunction engineering provides an effective route to modulate carrier transport and threshold voltage in amorphous oxide semiconductor thin-film transistors (TFTs); however, thermal processing can induce interfacial intermixing and defect redistribution, potentially obscuring the designed electronic structure. In this work, Al-doped In–Zn–Sn–O/Zn–Sn–O (AIZTO/ZTO) heterojunction channels were integrated with microwave annealing (MWA) to control the interfacial electronic structure and oxygen-related defect states while maintaining a low thermal budget. Optical and ultraviolet photoelectron spectroscopy revealed a conduction-band offset across the AIZTO/ZTO heterointerface, giving rise to a potential-well-like region that promotes interfacial carrier accumulation and transport. X-ray photoelectron spectroscopy, including depth profiling, further showed that MWA suppressed excessive cation intermixing and altered the distribution of oxygen-related bonding states across the heterointerface relative to conventional thermal annealing. Optimization of the AIZTO/ZTO thickness ratio further enabled simultaneous regulation of carrier transport and threshold voltage. The optimized microwave-annealed heterojunction TFT exhibited a near-zero threshold voltage of −0.38 V, together with a high linear field-effect mobility of 37.64 cm2 V−1 s−1 and a subthreshold swing of 202.09 mV dec−1. Furthermore, the device exhibited reduced threshold-voltage shifts of +0.52 and −1.59 V under positive and negative bias stress, respectively. These results demonstrate that microwave-controlled heterointerface engineering enables the coupled regulation of band alignment, oxygen-related defect states, and interfacial cation mixing, providing a materials-engineering strategy for mitigating the mobility–threshold-voltage–stability trade-off in oxide TFTs.