The paper presents a method for processing acoustic signals which allows the extraction, from a very noisy signal, of components which contain diagnostically useful information on the increased valve clearance of a combustion engine. This method used two-stage denoising of the acoustic signal performed by means of a discrete wavelet transform. Afterwards, based on the signal cleaned-up in this manner, its entropy was calculated as a quantitative measure of qualitative changes caused by the excessive clearance. The testing and processing of the actual acoustic signal of a combustion engine enabled clear extraction of components which contain information on the valve clearance being diagnosed.
The subject of the considerations presented herein is experimental research of effectiveness of disc brakes on various road surfaces in both dry and wet road conditions on the example of a passenger car equipped with different kinds of tyres. The factors affecting the length of the braking distance of a passenger car were described on the basis of which braking delays were measured for three selected tyre types with a different tread depth for three vehicle speeds of 50 km/h, 70 km/h and 100 km/h in order to determine how selected factors affect the braking distance of the vehicle. The experiments were conducted on a dry asphalt surface, a wet asphalt surface contaminated with sand as well as for comparison purposes, on a wet and dry concrete surface. The tests were conducted with the use of mid-range vehicles equipped with disc brakes with a diameter of 288 mm, 312 mm and 320 mm. The author hereof complied an analysis of the results for various combinations of discs, tyres, surfaces and vehicle speeds. The experiments demonstrated that the difference in the length of the braking distance between a dry and wet surface amounts to 1.87 m for 50 km/h, 3.18 m for 70 km/h and 4.97 m for 100 km/h. On the basis of the conducted experiments it might be concluded that braking is more efficient on an asphalt surface. With each type of the analysed brake discs, the distance needed stop the tested vehicle on a concrete surface was longer.
The paper presents the genesis of intensive development of electric drives with their own energy sources in the form of batteries. It also discusses the most popular lithium cells, which are the basis for the production of battery modules. The paper presents the size of a possible reduction of fuel consumption depending on the degree of electrification of the vehicle (micro hybrid, plug in hybrid, pure electric etc.) The paper shows limit parameters form cells determining their correct functioning. Against this background, the goals of constructing BMS systems have been outlined. As well as their most important performance parameters. It also discusses the following features of BMS: Architecture, Communication, Protection, Recuperation. The paper also points at legal restrictions connected with the safety risk being caused because of its ability to spontaneous combustion or its toxic properties.
The description attempt of the system person-vehicle-environment as an element of the system person-technical object-environment has been made. In the system analysis the reliability of the machine exploiter – a car driver has been taken into account. It has been pointed out that technical system operators (in this case – the drivers) have to be considered important in the structure of reliability of these systems. The operational and biological reliability characteristic of a human being – technical system operator has been carried out. The necessity for conducting different psychological tests for assessment of the quality of the human being – operator of each technical system – has been indicated.
24 November 2015 in Transport and Telecommunication Journal
The purpose of this paper was to present a reliability comparison of two types of city transport buses. Case study on the example of the well-known brands of city buses: Solaris Urbino 12 and Mercedes-Benz 628 Conecto L used at Municipal Transport Company in Lublin was presented in details. A reliability index for the most failure parts and complex systems for the period of time failures was determined. The analysis covered damages of the following systems: engine, electrical system, pneumatic system, brake system, driving system, central heating and air-conditioning and doors. Reliability was analyzed based on Weibull model. It has been demonstrated, that during the operation significant reliability differences occur between the buses produced nowadays.
The following article presents a proprietary real-time localization system using temporal analysis techniques and detection and localization algorithms supported by machine learning mechanisms. It covers both the technological aspects, such as proprietary electronics, and the overall architecture of the system for managing human and fixed assets. Its origins lie in the ever-increasing degree of automation in the management of company processes and the energy optimization associated with reducing the execution time of tasks in an intelligent building supported by in-building navigation. The positioning and tracking of objects in the presented system was realized using ultra-wideband radio tag technology. An exceptional focus has been placed on reducing the energy requirements of the components in order to maximize battery runtime, generate savings in terms of more efficient management of other energy consumers in the building and increase the equipment’s overall lifespan.