It is known that the yttria-stabilized zirconia (YSZ) material has superior thermal, mechanical, and electrical properties. This material is used for manufacturing products and components of air heaters, hydrogen reformers, cracking furnaces, fired heaters, etc. This work is aimed at searching for the optimal sintering mode of YSZ ceramics that provides a high crack growth resistance. Beam specimens of ZrO2 ceramics doped with 6, 7, and 8 mol% Y2O3 (hereinafter: 6YSZ, 7YSZ, and 8YSZ) were prepared using a conventional sintering technique. Four sintering temperatures (1450 °C, 1500 °C, 1550 °C, and 1600 °C) were used for the 6YSZ series and two sintering temperatures (1550 °C and 1600 °C) were used for the 7YSZ and 8YSZ series. The series of sintered specimens were ground and polished to reach a good surface quality. Several mechanical tests of the materials were performed, namely, the microhardness test, fracture toughness test by the indentation method, and single-edge notch beam (SENB) test under three-point bending. Based on XRD analysis, the phase balance (percentages of tetragonal, cubic, and monoclinic ZrO2 phases) of each composition was substantiated. The morphology of the fracture surfaces of specimens after both the fracture toughness tests was studied in relation to the mechanical behavior of the specimens and the microstructure of corresponding materials. SEM-EDX analysis was used for microstructural characterization. It was found that both the yttria percentage and sintering temperature affect the mechanical behavior of the ceramics. Optimal chemical composition and sintering temperature were determined for the studied series of ceramics. The maximum transformation toughening effect was revealed for ZrO2-6 mol% Y2O3 ceramics during indentation. However, in the case of a SENB test, the maximum transformation toughening effect in the crack tip vicinity was found in ZrO2-7 mol% Y2O3 ceramics. The conditions for obtaining YSZ ceramics with high fracture toughness are discussed.
This work presents the results of metallographic studies and the tensile, impact, and fatigue crack growth (FCG) resistance tests of 17H1S main gas pipeline steel in the as-received (AR) state and after a long-term operation (LTO). A significant number of non-metallic inclusions forming chains stretched along the direction of pipe rolling were found in the microstructure of the LTO steel. The lowest values of elongation at break and impact toughness of the steel were determined for the lower part of the pipe close to its inner surface. FCG tests at a low stress ratio (R = 0.1) did not reveal a significant change in its growth rate in degraded 17H1S steel compared to steel in the AR state. During tests at a stress ratio R = 0.5, the effect of degradation was more pronounced. The Paris’ law region of the da/dN—∆K diagram for the LTO steel corresponding to the lower part of the pipe close to its inner surface was higher than those for the steel in the AR state and the LTO steel corresponding to the higher part of the pipe. Fractographically, a significant number of delaminations of non-metallic inclusions from the matrix were recognized. Their role in the embrittlement of steel, especially steel from the lower part of the pipe close to its inner surface, was noted.
One of the key barriers to neural network adoption is the lack of computational resources and high-quality training data—particularly for unique objects without existing datasets. This research explores methods for generating realistic synthetic images that preserve the visual properties of target objects, ensuring their similarity to real-world appearance. We propose a flexible approach for synthetic data generation, focusing on improved accuracy and adaptability. Unlike many existing methods that rely heavily on specific generative models and require retraining with each new version, our method remains compatible with state-of-the-art models without high computational overhead. It is especially suited for user-defined objects, leveraging a 3D representation to preserve fine details and support integration into diverse environments. The approach also addresses resolution limitations by ensuring consistent object placement within high-quality scenes.