Alaa Ali Ghanem

Dr. Alaa Ali Ghanem

Egyptian Petroleum Research Institute, Cairo, Al Qāhirah, Egypt
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 January 2024 in Scientific Reports
Verified
Journal Article
Open access
PDF file
RERaghda A El-Nagar
Raghda A El-Nagar
NKN. A. Khalil
N. A. Khalil
YAY. Atef
Y. Atef
MNMaher I. Nessim
Maher I. Nessim
AGAlaa Ali Ghanem
Alaa Ali Ghanem
The features of this work on corrosion inhibition have been investigated based on the ecological awareness and according to the strict environmental legislations. This was done by studying how different imidazolium derivatives ionic liquids containing different alkyl chains R8, R10 and R12 affected the corrosion reaction of carbon steel specimen immersed in 1 M hydrochloric acid at various temperatures. Weight loss, potentiodynamic polarization and electrochemical impedance spectroscopy were utilized to examine the corrosion inhibition behavior on carbon steel. In addition, FT-IR spectroscopy was used to analyze the coated film that has been formed on the metal surface. The prepared ionic liquids showed effective inhibition efficiency, where the corrosion rate after the using of 100 ppm of R8-IL, R10-IL and R12-IL was decreased from 5.95 (µg cm−2 min−1) to 0.66, 0.56, and 0.44 (µg cm−2 min−1), respectively at 20 °C. In the polarization curves, the corrosion current, Icorr, decreases by ILs addition and suggest that ILs act as mixed type inhibitors. From EIS findings, the increase in Rct and decrease in Cdl values proves the adherence of inhibitor molecules on carbon steel surface. The temperature effect was also studied on the film formed, where increasing the temperature from 20 to 50 °C, the corrosion rate increased and the inhibitors efficacy decreased. The increasing in the length of the attached alkyl chain, the efficacies of the prepared inhibitors increases. Various thermodynamic parameters such as the reaction activation free energy (ΔG*), the entropy of activation (ΔS*), and the enthalpy of activation (ΔH*), as well as the adsorption isotherm were investigated in order to interpret the mechanism and obtain the most accurate perception.

4 May 2023 in International Journal of Hydrogen Energy
Verified
Journal Article
Closed access
AIAdewale Kabir Ipadeola
Adewale Kabir Ipadeola
AAAhmed Abdelgawad
Ahmed Abdelgawad
BSBelal Salah
Belal Salah
AGAlaa Ali Ghanem
Alaa Ali Ghanem
MCMira Chitt
Mira Chitt
KEKamel Eid
Kamel Eid

21 February 2022 in Materials
Verified
Journal Article
Open access
PDF file
AGAlaa Ali Ghanem
Alaa Ali Ghanem
RARima Alharthy
Rima Alharthy
SDSaad M. Desouky
Saad M. Desouky
RERaghda A El-Nagar
Raghda A El-Nagar
With the projected increase in the production of heavy oil due to the energy crisis, asphaltene-related issues are likely to come to the forefront. This leads to operational problems, safety hazards, and oil production deficiencies, resulting in huge economic losses for the petroleum industry. Therefore, in this work, we aimed to inhibit asphaltene precipitation using ionic liquid (IL) compounds. ILs with long alkyl chains can inhibit the precipitation of asphaltene molecules due to the π–π* interactions between them and the formation of hydrogen bonds. A series of imidazolium-based ionic liquids, IL-0, IL-4, IL-10, and IL-16, were synthesized with yield percents of 79, 81, 80, and 83%, respectively. The prepared materials were characterized well using FTIR, 1H-NMR, and Elemental Analysis. The surface tension, interfacial tension (IFT), and different surface parameters were investigated at different temperatures to simulate the reservoir temperature. IL-0, IL-4, IL-10, and IL-16 displayed their γcmc values at 35, 34, 31, and 32 mN/m at 303 °K, respectively. It was found that the prepared ILs are good surfactants with low values of interfacial tension. Quantum structure–activity relationships using Density Functional Theory (DFT) were used to investigate the geometry optimization electronic structures, the energy gap (ΔE), and the reactivity of the cations of the prepared ILs. The synthesized ILs were evaluated as asphaltene dispersants using two different techniques. The viscometric technique showed that the asphaltene onset precipitation was 28.5 vol.%. This percent was postponed to 42.8, 50, 78.5, and 64.3 vol.%, after adding IL-0, IL-4, IL-10, and IL-16, respectively, and the spectroscopic technique confirmed the results.

11 October 2023 in Scientific Reports
Verified
Journal Article
Open access
PDF file
AGAlaa Ali Ghanem
Alaa Ali Ghanem
MNMaher I. Nessim
Maher I. Nessim
NKN. A. Khalil
N. A. Khalil
RERaghda A El-Nagar
Raghda A El-Nagar
Deposition of asphaltene aggregates can easily depress the oil production, because it may clog the wellbores, annulus, pipelines, and surface facilities. Moreover, asphaltene molecules have a negative effect on the catalytic reactions in the refinery process. Therefore, in this work, three different ionic liquids (IL-H, IL-CH3, and IL-NO2) were synthesized, and characterized using FT-IR and NMR spectroscopy to evaluate their efficiency as asphaltene dispersants. The thermal gravimetric analysis of the prepared ILs showed that IL-H, IL-NO2, and IL-CH3 were thermally stable up to 280 °C. The ILs showed good dispersion activity of the petroleum asphaltenes, where the asphaltene onset precipitation (AOP) was changed from 7.5 to 10.5, 11, and 13.5 ml added n-heptane after the use of IL-H, IL-NO2, and IL-CH3, respectively. Moreover, the colloidal instability index of crude oil was changed from 0.92 (unstable asphaltene) to 0.69 (stable asphaltene). It is noted during the experiments that the presence of an alkyl chain attached to the ionic liquid moiety increases the efficiency of the dispersant. This may be owing to the formation of π–π* with asphaltene molecules due to the presence of electron donating group. Quantum chemical parameters were calculated for the prepared ILs, and the theoretical data confirmed the experimental results.

11 March 2023 in Scientific Reports
Verified
Journal Article
Open access
PDF file
RERaghda A. El-Nagar
Raghda A. El-Nagar
MNMaher I. Nessim
Maher I. Nessim
DIDina A. Ismail
Dina A. Ismail
MMManal G. Mohamed
Manal G. Mohamed
AGAlaa Ali Ghanem
Alaa Ali Ghanem
Precipitation and deposition of asphaltene are considered as catastrophic issues facing the petroleum industry. Asphaltene deposition mainly occurs at variety places such as formation pore spaces, pumps, pipelines, wellbore, wellhead, tubing, surface facilities and safety valves causing operational problems, production deficiencies and enormous economic losses. This work aims to study the effect of series of synthesized aryl ionic liquids (ILs) containing different alkyl chains, named as R8-IL, R10-IL, R12-IL, and R14-IL, on the onset precipitation point of asphaltene in crude oil. R8-IL, R10-IL, R12-IL, and R14-IL were synthesized with high yields (the yield varied between 82 and 88%) and characterized via different tools of analysis (FTIR, 1H NMR, and Elemental Analysis). Their Thermal Gravimetric Analysis (TGA) was investigated and showed a reasonable degree of stability. It was found that R8-IL (short alkyl chain) has the highest stability, while R14-IL (long alkyl chain) is the lowest one. Quantum chemical calculations were conducted to study the reactivity and geometry of their electronic structures. Moreover, surface and interfacial tension of them were studied. It was found that the efficiency of the surface active parameters increased by increasing the length of the alkyl chain. The ILs were evaluated to delay the onset precipitation point of asphaltene using to different methods; the kinematic viscosity and the refractive index. Results from the two methods showed delaying of onset precipitation after the addition of the prepared ILs. The asphaltene aggregates was dispersed due to the π–π* interactions and hydrogen bonds formation with the ILs.

1 June 2023 in Heliyon
Verified
Journal Article
Open access
AIAdewale Kabir Ipadeola
Adewale Kabir Ipadeola
BHBelal Hussien
Belal Hussien
AGAlaa Ali Ghanem
Alaa Ali Ghanem
DADoniyorbek Kambaraliyevich Ahmadaliev
Doniyorbek Kambaraliyevich Ahmadaliev
MSM. A. Sharaf
M. A. Sharaf
KEKamel Eid
Kamel Eid
Morphologically controlled Pd-based nanocrystals are the most efficient strategies for improving the electrocatalytic ethanol oxidation reaction (EOR) performance; however, their morphological-EOR activity relationship and effect of electrolytes at a wide pH range are still ambiguous. Here, we have synthesized porous self-standing Pd clustered nanospheres (Pd-CNSs) and Pd nanocubes (Pd-NCBs) for the EOR in acidic (H2SO4), alkaline (KOH), and neutral (NaHCO3) electrolytes compared to commercial spherical-like Pd/C catalysts. The fabrication process comprises the ice-cooling reduction of Pd precursor by sodium borohydride (NaBH4) and l-ascorbic acid to form Pd-CNSs and Pd-NCBs, respectively. The EOR activity of Pd-CNSs significantly outperformed those of Pd-NCBs, and Pd/C in all electrolytes, but the EOR activity was better in KOH than in H2SO4 and NaHCO3. This is due to the 3D porous clustered nanospherical morphology that makes Pd active centers more accessible and maximizes their utilization during EOR. The EOR specific/mass activities of Pd-CNSs reached (8.51 mA/cm2/2.39 A/mgPd) in KOH, (2.98 mA/cm2/0.88 A/mgPd) in H2SO4, and (0.061 mA/cm2/0.0083 A/mgPd) in NaHCO3, in addition to stability after 1000 cycles. This study affirms that porous 3D spherical Pd nanostructures are preferred for the EOR than those of 0D spherical-like and multi-dimensional cube-like nanostructures.