Xianbo Li

Xianbo Li

Auto-generated profile, based on publicly available information

Xianbo Li

School of Electronics and Information Technology, Sun Yat-sen University, Guangzhou, China

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 March 2018 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
XLXianbo Li
Xianbo Li
BHBabar Hussain
Babar Hussain
LWLi Wang
Li Wang
JJJunmin Jiang
Junmin Jiang
CYC. Patrick Yue
C. Patrick Yue
This paper presents an energy-efficient visible light communication (VLC) receiver system-on-a-chip (SoC) that employs ambient light rejection (ALR) and post-equalization techniques for emerging light fidelity (Li-Fi) applications using ordinary phosphorescent white light-emitting diodes (LEDs). A current-reuse transimpedance amplifier is proposed for energy-efficient applications. An ALR unit is implemented to eliminate the potential DC interference under strong ambient light. A two-stage continuous-time linear equalizer is utilized to compensate for the limited bandwidth of white LEDs, which is below 3 MHz. Implemented in a 0.18 μm CMOS process, the receiver occupies an area of 0.7 × 0.4 mm 2 and consumes 2.2 mW of power at 24 Mb/s from a 1.8 V power supply. An IEEE 802.15.7 PHY-II compliant Li-Fi link that employs the proposed receiver SoC and a custom transmitter SoC is demonstrated based on 1-W phosphorescent white LEDs without using blue filtering, achieving a bit error rate of 1 × 10 -9 for data rates up to 24 Mb/s over 1.6 m distance, and 22 Mb/s over 2.7 m distance, with on-off keying modulation and 2 11 -1 pseudorandom binary sequence (PRBS-11) optical inputs. The receiver SoC achieves a bit efficiency six times better than that of the prior art using off-the-shelf discrete components, and can tolerate an ambient light level of 3500 lx. A figure of merit accommodating the most important system parameters is also proposed for a comprehensive comparison of different VLC systems.

1 March 2023 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
XLXianbo Li
Xianbo Li
HWHengbo Wang
Hengbo Wang
JZJianping Zhu
Jianping Zhu
Chik Patrick YueChik Patrick Yue
Chik Patrick Yue
This article presents two dual-photodiode (PD) differential optical receivers that achieve double photodetection area to support gigabit-per-second optical wireless communication (OWC), while maintaining the receiver bandwidth. To enable differential light detection with a single incident light beam, a dual-PD OWC receiver architecture is proposed. In this architecture, two PDs are connected to the receiver complementarily without sacrificing the receiver bandwidth, and meanwhile, remain properly reversely biased. In addition, an adaptive dc photocurrent cancellation (ADPC) circuit is employed to prevent the saturation of the receivers under strong and imbalanced incident light. Based on the proposed architecture, two OWC receivers are implemented, including a proposed receiver and a reference one. In the proposed receiver, a low-noise shunt-feedback transimpedance amplifier (SF-TIA) with differential-pair-based current reuse and cross-coupled resistive feedback is proposed to enhance the sensitivity. In contrast, the reference receiver employs positive capacitive feedback to improve the transimpedance amplifier (TIA) performance. Both receivers have been fabricated with a standard 180 nm CMOS process and have been wire-bonded to two PDs. Experimental results indicate that both receivers can detect optical signals with data rates up to 2 Gb/s, and the proposed receiver architecture has significantly improved the bit error rate (BER) at 1.5 Gb/s from worse than $10^{-6}$ – $10^{-9}$ (error-free) with constrained optical power density. Moreover, the proposed receiver achieves an input sensitivity of $3.4~\mu \text{A}_{\mathrm {pp}}$ due to the superior performance of the proposed TIA, which outperforms the sensitivity of $10.4~\mu \text{A}_{\mathrm {pp}}$ from the reference receiver. Both sensitivities are measured at 1.5 Gb/s for a BER of $10^{-9}$ (error-free). The power consumption of the proposed and the reference receiver are 24.3 and 19.1 mW, respectively, excluding the output driver.

25 October 2022 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
XLXianbo Li
Xianbo Li
DLDerun Li
Derun Li
CTChao Tang
Chao Tang
SLShaoxian Liu
Shaoxian Liu
This paper presents the design and characterization of a fully-integrated receiver based on single-photon avalanche diodes (SPADs) with nanosecond dead time for high-speed high-sensitivity optical wireless communication (OWC). The receiver consists of a 4x4 SPAD array that is based on a p-well/deep n-well (DNW) structure, and each SPAD is integrated with a tunable front-end circuit to perform quench and reset. In addition, an OR tree is designed to combine the 16 channels of output from the front-end circuits to generate a single data stream for signal processing, and an output buffer is implemented as the interface to drive 50-Ω loading for testing purpose. Fabricated in a standard 180 nm CMOS process, the receiver achieves a minimum dead time of about 2.5 ns. Bit error rate (BER) measurement of the implemented receiver indicates a sensitivity of -31.6 dBm at 100 Mb/s for a BER of 2x10 -3 and a wavelength of 520 nm, where on-off keying (OOK) modulation and a 2 15 -1 pseudorandom binary sequence (PRBS-15) are employed. To recover the transmitted data stream from the received signal, a signal processing flow specific for SPAD-based receivers is proposed and implemented.

1 April 2019 in Electronics Letters
Verified
Journal Article
Open access
PDF file
XLXianbo Li
Xianbo Li
CYC. Patrick Yue
C. Patrick Yue
In this Letter, a novel inverter‐based trans‐impedance amplifier (TIA) with enhanced gain and sensitivity is presented for Gb/s visible light communication (VLC). By employing capacitive feedback with a large negative equivalent capacitance to reduce the TIA input capacitance, the proposed TIA achieves a trans‐impedance gain of 89.4 dBΩ with 5.7 dB improvement and an input referred noise current of 0.43 µA rms with 1.8 dB improvement when compared to a reference TIA without capacitive feedback. Both the proposed TIA and the reference TIA have the same −3 dB bandwidth (BW) of 3 GHz and the same power consumption of 1 mW, and they are designed with a 40 nm CMOS process.

15 January 2019 in IEEE Photonics Journal
Verified
Journal Article
Open access
XLXianbo Li
Xianbo Li
BHBabar Hussain
Babar Hussain
JKJian Kang
Jian Kang
HKHoi Sing Kwok
Hoi Sing Kwok
CYC. Patrick Yue
C. Patrick Yue

21 July 2023 in Electronics
Verified
Journal Article
Open access
PDF file
YZYubu Zhou
Yubu Zhou
HGhuayu gao
huayu gao
JWJing Wang
Jing Wang
Fion Sze Yan YeungFion Sze Yan Yeung
Fion Sze Yan Yeung
SLShenghuang Lin
Shenghuang Lin
Baiquan LiuBaiquan Liu
Baiquan Liu
Organic light-emitting diodes (OLEDs) are promising for displays and lighting technologies because of their excellent advantages, such as high efficiency, high luminance, low power consumption, light weight, and flexibility. In recent years, ultrathin emitting nanolayers (UENs) have been used to develop OLEDs without the doping technique, which can simplify device structure, reduce material loss, achieve good exciton utilization, and realize comparable performance to doped devices such as the external quantum efficiency of 28.16%, current efficiency of 63.84 cd/A, and power efficiency of 76.70 Lm/W for white OLEDs. In this review, we comprehensively summarize the recent progress in the field of UEN-based OLEDs. Firstly, the host–guest-doped OLEDs and doping-free UEN-based OLEDs are compared. Then, various effective approaches for designing UEN-based OLEDs are presented, including both monochromatic and white devices. In particular, the properties of materials, the design of device structures, and the main working mechanisms of UEN-based OLEDs are highlighted. Finally, an outlook on the future development of UEN-based OLEDs is provided.