1 February 2022 in IEEE Transactions on Biomedical Circuits and Systems
During the global epidemic, non-contact methods for monitoring the vital signs of several people have become particularly important. Advanced signal processing techniques have recently been demonstrated to separate and track the vital signs of multiple people. In this paper, we further develop the multi-person vital signs identification (VSign-ID) system to make non-contact detection available in public places. VSign-ID not only extracts multi-person vital signs but also states from whom these vital signs are collected. We utilize multiple doppler radars to expand the effective range of the measurement area and propose a space and time matching mechanism for vital signs identification. We use a thermal camera to detect the number of people and their movements. VSign-ID efficiently coordinates these two types of sensors (i.e., the doppler radars and the thermal camera) to track and identify the respiration rates and heartbeat rates of multiple people. A series of experiments and simulations are conducted to measure the efficiency of VSign-ID. In the case of five people sitting closely, the estimation errors for respiration and heartbeat rates are −4.85 dB and −2.36 dB lower than the standard resolution of the system, respectively, despite using only two independent radars.
4 December 2020 in IEEE Transactions on Microwave Theory and Techniques
This article presents the combination of a self-injection-locked (SIL) radar with frequency-modulated continuous-wave (FMCW) and switched phased-array (SPA) techniques to locate multiple people and detect their vital signs with high resolution and high sensitivity. The proposed system utilizes a subharmonic upconverter/downconverter with a 1.675-2.175-GHz chirp local oscillator (LO) signal to convert between a 2.45-GHz SIL IF signal and a 5.8-6.8-GHz FMCW RF signal. It transmits the FMCW RF signal and receives the echo signal using a transmit (Tx) antenna and a switched receive (Rx) antenna array, respectively, and processes the SIL IF signal to produce a range-azimuth map (RAM) that displays the positions of all people, their respiration rates (RRs), and their heart rates (HRs) in the monitoring region. The key advantage of combining the FMCW and SPA techniques is the provision of higher spatial resolution than obtained using each technique alone. This article also proposes a Doppler-weighted RAM to improve the identifiability of the images that are generated by two persons close to each other. Finally, the presented system was experimentally validated by measuring the locations and vital signs of up to five seated persons at a range of more than 1.5 m, of which two persons were seated almost shoulder by shoulder.
3 February 2020 in IEEE Transactions on Microwave Theory and Techniques
This article presents a single-conversion self-injection-locked (SIL) (SCSIL) hybrid mode radar with a novel frequency estimation algorithm, which improves the range resolution in a frequency-modulated continuous-wave (FMCW) mode and simultaneously detects the vital signs of multiple subjects in the CW mode. The system architecture includes an SIL oscillator (SILO), a frequency converter, two antennas, and a noncoherent frequency demodulator. Due to the frequency-phase relationship in the spectrum of the beat signal in the FMCW mode, the distance to the closely spaced subjects can be determined. Moreover, the algorithm will identify the most dominant component and remove it from the input signal, and the steps are repeated until the residual-to-input energy ratio is less than the threshold value. This iterative method can thus distinguish multiple signals whose frequencies are close to each other and can support a superresolution analysis in both FMCW and CW modes. In an experiment, the radar with a 150-MHz bandwidth and a sensing period of 20 s can simultaneously provide accurate range and vital sign information of two adjacent subjects with radial and azimuth spacings of 60 cm and 5°, respectively.
8 October 2020 in IEEE Transactions on Biomedical Circuits and Systems
Noninvasive monitoring is an important internet-of-things application, which is made possible with the advances in radio-frequency based detection technologies. Existing techniques however rely on the use of antenna array and/or frequency modulated continuous wave radar to detect vital signs of multiple adjacent objects. Antenna size and limited bandwidth greatly limit the applicability. In this paper, we propose our system termed ‘DeepMining’ which is a single-antenna, narrowband Doppler radar system that can simultaneously track the respiration and heartbeat rates of multiple persons with high accuracy. DeepMining uses a number of signal observations over a period of time as input and returns the trajectory of the respiration and heartbeat rates of each person. The extraction is based on frequency separation algorithms using successive signal cancellation. The proposed system is implemented using the self-injection locking radar architecture and tested in a series of experiments, showing accuracies of 90% and 85% for two and three objects, respectively, even for closely located persons.
16 November 2023 in IEEE Communications Letters
In this study, we develop an active reconfigurable intelligent surface (RIS)-assisted multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) prototype compliant with the 5G New Radio standard at 3.5 GHz. The experimental results clearly indicate that active RIS plays a vital role in enhancing MIMO performance, surpassing passive RIS. Furthermore, when considering factors such as complexity, energy consumption, and performance, the comparative evaluation between passive RIS and active RIS reinforces the critical role of active RIS in MIMO systems. These findings underscore the practical significance of active RIS in improving MIMO gain in 5G scenarios.
7 March 2024 in IEEE Transactions on Antennas and Propagation
Future wireless networks require the ability to actively adjust the wireless environment to meet strict performance indicators. Reconfigurable Intelligent Surface (RIS) technology is gaining attention for its advantages of low power consumption, cost-effectiveness, and ease of deployment. However, existing channel models for RIS often ignore important properties, such as the impairment in the RIS’s switch component and the polarization efficiency among antennas, limiting their practical use. In this paper, we propose a new channel model for RIS that considers these ignored properties, including the reflected field, scattered field, and antenna resonant mode. We verify the proposed model through practical implementation of a 4 × 4 RIS array with patch antennas in the 3.5 GHz band, using a phase shifter as the switch component of a RIS element. The equivalent model of the phase shifter is also formulated and incorporated into the channel model. We propose a blind controlling algorithm to discuss the properties of our channel model and emphasize the importance of considering polarization and tracking mechanisms for the controlling algorithm. Our channel model is an improvement over existing models and can be used in the practical design of RIS technology. The proposed algorithm provides a practical approach to controlling the wireless environment, suitable for various wireless applications.