In this numerical study, the impact of equidistant trapezoidal ribs on the characteristics of premixed H2-air micro-combustion was investigated, with a specific focus on the rib height. The study comprehensively examined flame structure, flame front position, flame speed, and combustion efficiency. A comparative analysis was performed between a backward-facing step micro combustor (MCSD) and micro combustors with varying rib heights: MCRD1 (0.5 mm), MCRD2 (0.6 mm), and MCRD3 (0.7 mm). The incorporation of trapezoidal ribs resulted in the creation of elongated and evenly distributed recirculation zones, significantly enhancing mixing and promoting flame stability, particularly at higher rib heights. The recirculation zones played a critical role in influencing the chemical reaction rate and the species distribution, leading to higher flame speed and greater combustion intensity. The findings highlight the outcomes of incorporating ribs in terms of combustion efficiency. The combustion efficiency values for MCRD1, MCRD2, and MCRD3 were recorded as 96.95%, 96.75%, and 96.61%, respectively, while the MCSD had a combustion efficiency of 97.14%. Hence, the recommended range of rib height is considered advantageous in ensuring an optimal balance between improved flame stabilization and maintaining a satisfactory level of combustion efficiency. The findings provide valuable insights for optimizing micro-thermophotovoltaic systems.
20 July 2026 in International Journal of Thermofluids
This study presents a detailed computational investigation of internal flow dynamics within a centrifugal compressor using advanced computational fluid dynamics techniques. The primary objective is to elucidate the thermodynamic interactions and flow structures influencing compressor performance across various operating conditions. High-fidelity simulations are performed on a single-passage configuration at a fixed rotational speed of 80 000 rpm, capturing critical phenomena such as flow separation, vortex leakage, recirculation zones, and secondary flows. A comprehensive hub-to-shroud analysis reveals the spatial evolution of pressure fields, temperature gradients, and turbulence characteristics, highlighting distinct aerodynamic regimes: uniform flow with minimal gradients near the hub (20% span), balanced effects at mid-span (50%), and intensified flow disturbances and thermal gradients near the shroud (80%). The results emphasize the dominance of secondary flows and separation, particularly under off-design conditions, with complex helical structures and recirculation zones becoming more prominent at higher pressure ratios. Blade loading analysis further indicates that the leading-edge and tip regions are most susceptible to adverse pressure gradients and flow detachment. These findings underscore the critical importance of geometric optimization in mitigating loss-inducing flow features and improving compressor efficiency. The outcomes offer valuable insights for enhancing the performance and reliability of compressors in diesel engine applications and contribute to the broader field of high-performance turbomachinery design.