Jacobo Alvarez

Jacobo Alvarez

Auto-generated profile, based on publicly available information

Jacobo Alvarez

Electronics Technology Department, University of Vigo, Spain ES-36210

Research Focus & Metrics

Academic Career Length

29Years (1998-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 April 2008 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
OSOscar López Sánchez
Oscar López Sánchez
JAJacobo Alvarez
Jacobo Alvarez
Jesus Doval-GandoyJesus Doval-Gandoy
Jesus Doval-Gandoy
FFFrancisco D. Freijedo
Francisco D. Freijedo
In the last few years, interest in multiphase converter technology has increased due to the benefits of using more than three phases in drive applications. Besides, multilevel converter technology permits the achievement of high power ratings with voltage limited devices. Multilevel multiphase technology combines the benefits of both technologies, but new modulation techniques must be developed in order to take advantage of multilevel multiphase converters. In this paper, a novel space vector pulsewidth modulation (SVPWM) algorithm for multilevel multiphase voltage source converters is presented. This algorithm is the result of the two main contributions of this paper: the demonstration that a multilevel multiphase modulator can be realized from a two-level multiphase modulator, and the development of a new two-level multiphase SVPWM algorithm. The multiphase SVPWM algorithm presented in this paper can be applied to most multilevel topologies; it has low computational complexity and it is suitable for hardware implementations. Finally, the algorithm was implemented in a low-cost field-programmable gate array and it was tested in a laboratory with a real prototype using a five-level five-phase inverter.

4 April 2008 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
OSOscar López Sánchez
Oscar López Sánchez
JAJacobo Alvarez
Jacobo Alvarez
Jesus Doval-GandoyJesus Doval-Gandoy
Jesus Doval-Gandoy
FFFrancisco D. Freijedo
Francisco D. Freijedo
AMAndres Augusto Nogueiras Melendez
Andres Augusto Nogueiras Melendez
CPCarlos M. Penalver
Carlos M. Penalver
Multilevel converters can meet the increasing demand of power ratings and power quality associated with reduced harmonic distortion and lower electromagnetic interference. When the number of levels increases, it is necessary to control more and more switches in parallel. Field programmable gate arrays (FPGAs), with their concurrent processing capability, are suitable for the implementation of multilevel modulation algorithms. Among them, space vector pulsewidth modulation algorithms offer great flexibility to optimize switching waveforms and are well suited for digital implementation. In this paper, two algorithms, 2-D and 3-D, are analyzed and implemented in an FPGA. In order to carry out the implementation, both algorithms have been described in very high speed integrated circuit hardware description language, partly hand coded, and partly automatically generated using the system generator tool. Both implementations are compared in terms of implementation complexity and logic resources required. Finally, test results with a neutral-point-clamped inverter are presented.

26 August 2008 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
OSOscar López Sánchez
Oscar López Sánchez
JAJacobo Alvarez
Jacobo Alvarez
Jesus Doval-GandoyJesus Doval-Gandoy
Jesus Doval-Gandoy
FFFrancisco D. Freijedo
Francisco D. Freijedo
Multilevel multiphase technology combines the benefits of multilevel converters and multiphase machines. Nevertheless, new modulation techniques must be developed to take advantage of multilevel multiphase converters. In this paper, a new space vector pulsewidth modulation algorithm for multilevel multiphase voltage source converters with switching state redundancy is introduced. As in three-phase converters, the switching state redundancy permits to achieve different goals like extending the modulation index and reducing the number of switchings. This new algorithm can be applied to the most usual multilevel topologies; it has low computational complexity, and it is suitable for hardware implementations. Finally, the algorithm was implemented in a field-programmable gate array, and it was tested by using a five-level five-phase inverter feeding a motor.

14 August 2019 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
OSOscar López Sánchez
Oscar López Sánchez
JAJacobo Alvarez
Jacobo Alvarez
Alejandro G. YepesAlejandro G. Yepes
Alejandro G. Yepes
FBFernando Baneira
Fernando Baneira
Diego Pérez-EstévezDiego Pérez-Estévez
Diego Pérez-Estévez
Jesus Doval-GandoyJesus Doval-Gandoy
Jesus Doval-Gandoy
The space vector pulse width modulation (PWM) (SVPWM) techniques enhance the performance of multilevel multiphase inverters. With multilevel (three-phase) inverters and with (two-level) multiphase inverters, it is widely accepted that the typical SVPWM strategies have an equivalent carrier-based PWM (CBPWM) counterpart, which produces identical results. However, the conclusions reached in the papers that show these cannot be applied, nor even extended, to SVPWM techniques with more than two levels and three phases. This paper shows that the most widely accepted multilevel multiphase SVPWM techniques have a fully equivalent CBPWM counterpart, which consists of a phase disposition PWM (PDPWM) with an appropriate zero-sequence injection scheme. Closed-form expressions to calculate the zero sequences are provided. The proposed modulation techniques are simulated and then implemented in a field-programmable gate array (FPGA), showing that the equivalent CBPWM techniques produce identical results as the original SVPWM ones, but with a significant reduction of hardware requirements. The proposed methodology can be generalized to other multilevel multiphase SVPWM techniques.

22 January 2016 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
OSOscar López Sánchez
Oscar López Sánchez
JAJacobo Alvarez
Jacobo Alvarez
JMJano Malvar
Jano Malvar
Alejandro G. YepesAlejandro G. Yepes
Alejandro G. Yepes
AVAna Vidal
Ana Vidal
Jesus Doval-GandoyJesus Doval-Gandoy
Jesus Doval-Gandoy
Switching common-mode voltage (CMV) generated by the pulse width modulation (PWM) of the inverter causes common-mode currents, which lead to motor bearing failures and electromagnetic interference problems in multiphase drives. Such switching CMV can be reduced by taking advantage of the switching states of multilevel multiphase inverters that produce zero CMV. Specific space-vector PWM (SVPWM) techniques with CMV elimination, which only use zero CMV states, have been proposed for three-level five-phase drives, and for open-end winding five-, six-, and seven-phase drives, but such methods cannot be extended to a higher number of levels or phases. This paper presents a general (for any number of levels and phases) SVPMW with CMV elimination. The proposed technique can be applied to most multilevel topologies, has low computational complexity and is suitable for low-cost hardware implementations. The new algorithm is implemented in a low-cost field-programmable gate array and it is successfully tested in the laboratory using a five-level five-phase motor drive.

20 October 2009 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
Jose I. LeonJose I. Leon
Jose I. Leon
OSOscar López Sánchez
Oscar López Sánchez
LFLeopoldo Franquelo
Leopoldo Franquelo
Jesus Doval-GandoyJesus Doval-Gandoy
Jesus Doval-Gandoy
Sergio Vazquez PerezSergio Vazquez Perez
Sergio Vazquez Perez
FFFrancisco D. Freijedo
Francisco D. Freijedo
Multiphase converters have been applied to an increasing number of industrial applications in recent years. On the other hand, multilevel converters have become a mature technology mainly in medium- and high-power applications. One of the problems of multilevel converters is the dc voltage unbalance of the dc bus. Depending on the loading conditions and the number of levels of the converter, oscillations appear in the dc voltages of the dc link. This paper presents a feedforward modulation technique for multilevel multiphase converters that reduces the distortion under balanced or unbalanced dc conditions. The proposed modulation method can be applied to any multilevel-converter topology with any number of levels and phases. Experimental results are shown in order to validate the proposed feedforward modulation technique.