6 February 2026 in IEEE Transactions on Instrumentation and Measurement
Cilium-based micro-electromechanical system (MEMS) vector hydrophones are critical in underwater acoustic detection, but their performance is highly sensitive to cilium geometry. Traditional trial-and-error methods are inefficient under complex constraints. This study presents an optimization approach using the constrained optimization by linear approximation (COBYLA) algorithm, combined with multiphysics finite element analysis, to improve sensitivity while precisely controlling the first-order characteristic frequency (FOCF). The cilium is parameterized with a seven-node interpolation curve, and an acoustic-structural coupled model is built in COMSOL. Under a 1000-Hz FOCF constraint, the maximum stress at the beam (MSB) is selected as the optimization objective. COBYLA enables automatic iterative shape optimization with real-time performance feedback. Simulation results show a frequency deviation of less than 0.17% and a 21.3 dB@1-kHz improvement in sensitivity. A prototype fabricated using MEMS and 3-D printing technologies was tested in a standing wave tube, yielding a measured linear bandwidth of the sensor of 1000 Hz and a sensitivity of −175.8 dB@1 kHz re 1 V/ $\mu $ Pa, matching simulation predictions. Meanwhile, the fabricated sensor demonstrated stable operation after withstanding a 100-g shock and a hydrostatic pressure of 7 MPa. This work demonstrates a high-efficiency, high-accuracy framework for MEMS hydrophone design, offering enhanced performance in complex underwater acoustic environments.