Minodora Maria Pasare

Minodora Maria Pasare

Auto-generated profile, based on publicly available information

Minodora Maria Pasare

Department of Industrial Engineering and Automation, Faculty of Engineering, Constantin Brancusi University, Tineretului Street, No. 4, 210185 Targu Jiu, Romania

Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 August 2017 in Revista de Chimie
Verified
Journal Article
Closed access
Rami DOUKEHRami DOUKEH
Rami DOUKEH
MBMihaela Bombos
Mihaela Bombos
ATAncuta Trifoi
Ancuta Trifoi
MPMinodora Pasare
Minodora Pasare
IBIonut Banu
Ionut Banu
IBIon Bolocan
Ion Bolocan
Hydrodesulphurization of dimethyldisulphide was performed on Ni-Co-Mo /�-Al2O3 catalyst. The catalyst was characterized by determining the adsorption isotherms, the pore size distribution and the acid strength. Experiments were carried out on a laboratory echipament in continuous system using a fixed bed catalytic reactor at 50-100�C, pressure from 10 barr to 50 barr, the liquid hourly space velocity from 1h-1 to 4h-1 and the molar ratio H2 / dimethyldisulphide 60/1. A simplified kinetic model based on the Langmuir�Hinshelwood theory, for the dimethyldisulphide hydrodesulfurization process of dimethyldisulphide has been proposed. The results show the good accuracy of the model.

10 August 2021 in Materials
Verified
Journal Article
Open access
PDF file
MAMARIOARA ABRUDEANU
MARIOARA ABRUDEANU
MDMARIA-MAGDALENA DICU
MARIA-MAGDALENA DICU
MPMaria Minodora Pasăre
Maria Minodora Pasăre
Zircaloy-4 has an important role in the construction of generation III nuclear reactors. An important application is the fuel element sheath, which must have excellent corrosion resistance in the working environment, adequate mechanical characteristics and very good heat transfer properties from the combustible element to the coolant. The corrosion processes at high temperatures, the accidents that lead to significant increases in temperature and the structural transformations associated with them affect the heat transfer process. The paper presents research on the influence of high temperatures on the microstructure and thermal diffusivity of the zy-4 alloy. The samples were treated in air, at temperatures between 850 and 1050 °C for 60 min. The corrosion layers were characterized microstructurally and chemically. Furthermore, the transformations produced in the base material under the corrosion layer were analyzed. The values of thermal diffusivity were determined and correlated with the structural transformations. Considering the state of research on the materials appropriate to be used for new generation reactors, the current importance of third-generation reactors for energy systems and the fact that they will operate in the coming years, we consider that the study offers useful outcomes in the field of nuclear energy.

3 November 2015 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
MPM M Pasare
M M Pasare
Composite materials are extensively studied, especially in recent years, which have a wide application in industry. Among these composite materials, in this paper we studied about electrolyte composites obtained. The matrix is made up of particles of Ni-P on which have been deposited Si-C hard particles. The amount of phosphorus incorporated into the layer increases with increasing the content of phosphorous acid in the electrolyte. The content of phosphorus incorporated into the coating composition evolves as both solid as well as particle-free solutions. When the content of phosphorous acid in the electrolyte is low and where alloys are micro crystallized, the presence of particulates changes a little the phosphorus content. At the increase of phosphorus content included in the coating is observed that the incorporation of phosphorus is higher for increasing the amount of silicon carbide particles. This matrix study was done according to the amount of phosphorus in the deposited layer. The co-deposited phosphorus modifies the crystallization mechanism so the super saturation nickel network by phosphorus allows the inhibition of the growth of nickel crystallites whose size decreases until the complete amorphization of the solid solution. The development of these deposits was aimed at determining the influence of the variation of phosphorous acid in the electrolyte, and therefore the change in the content of phosphorus included in the layer for the SiC particulate, on the one hand, and, on the other hand, it was intended the influence of heat treatment on the deposition hardness. After the measurements, it is noted that the layer thicknesses are higher for the deposition obtained from electrolyte with small containing of phosphorous acid. The structure of the Ni-P alloy and the composite material Ni-P / SiC, depends on the amount of phosphorus contained in the layer and varies from the crystalline state (the low content of phosphorus) to the amorphous state (the high content of phosphorus). Metallographic investigation and X-ray diffraction on the P20S40 sample structure reveals the existence of nano-crystalline state of the layer, and it is noted that the grains of Ni-P alloy is lower than that incorporated SiC particles that are more evident. Following heat treatment, it was found that the microcrystalline structure of the deposits, consisting of a solid nickel solution supersaturated in phosphorus, is maintained up to 463 K, and at higher temperatures it is producing the precipitation of the Ni3P compound into the nickel matrix.

16 April 2026 in Applied Sciences
Verified
Journal Article
Open access
PDF file
CPCosmin Ionut Pirvu
Cosmin Ionut Pirvu
DIDumitru Alina- Iulia
Dumitru Alina- Iulia
ASAlexandru Sover
Alexandru Sover
Denis NEGREADenis NEGREA
Denis NEGREA
SMSorin Moga
Sorin Moga
MAMARIOARA ABRUDEANU
MARIOARA ABRUDEANU
This study presents an experimental investigation of the influence of dopant type and calcination temperature on BaTiO3-based piezoceramics synthesized by a solid-state calcination process. The effects of Mn, Nb, La, and Ce dopants on the structural, morphological, and piezoelectric characteristics of powders calcined at 1000 °C and 1100 °C were systematically evaluated. In addition, two co-doped BaTiO3 compositions, namely Mn–Nb and La–Nb, calcined at 1000 °C, were investigated in order to assess the combined effect of acceptor–donor and donor–donor doping strategies on microstructural evolution and structural stability. The synthesized powders were characterized by scanning electron microscopy (SEM), particle size analysis, energy-dispersive X-ray spectroscopy (EDS), elemental mapping, and X-ray diffraction (XRD), in comparison with a commercial BaTiO3 reference powder. The piezoelectric response was assessed by correlating the structural modifications induced by doping with the estimated piezoelectric coefficient d33, calculated as a function of the tetragonality ratio (c/a) and further correlated with the crystallite size. The results reveal significant variations in grain growth, dopant distribution, and crystallographic stability, highlighting the critical role of dopant chemistry and calcination temperature in tailoring the functional properties of BaTiO3 for piezoelectric applications.

30 March 2025 in Journal of Research and Innovation for Sustainable Society
Verified
Journal Article
Open access
MPMinodora- Maria Pasăre
Minodora- Maria Pasăre
NMNicoleta-Maria Mihuț
Nicoleta-Maria Mihuț
BGBUCIU GABRIEL
BUCIU GABRIEL
Bone cements have undergone significant evolution in recent decades, adapting to clinical and technological needs. From the simple use of polymethyl methacrylate (PMMA) cement in the mid-20th century, there has been the development of advanced materials that combine mechanical functionality with biological benefits and sustainability.

1 January 2011 in ANNALS OF THE ORADEA UNIVERSITY. Fascicle of Management and Technological Engineering.
Verified
Journal Article
Open access
MPMinodora Pasäƒre
Minodora Pasäƒre
NMNicoleta Mihuå£
Nicoleta Mihuå£