This review explores the integration of polymer materials into piezoelectric composite structures, focusing on their application in sensor technologies, and wearable electronics. Piezoelectric composites combining ceramic phases like BaTiO₃, KNN, or PZT with polymers such as PVDF exhibit significant potential due to their enhanced flexibility, processability, and electrical performance. The synergy between the high piezoelectric sensitivity of ceramics and the mechanical flexibility of polymers enables the development of advanced materials for biomedical devices, energy conversion, and smart infrastructure applications. This review discusses the evolution of lead-free ceramics, the challenges in improving polymer–ceramic interfaces, and innovations like 3D printing and surface functionalization, which enhance charge transfer and material durability. It also covers the effects of radiation on these materials, particularly in nuclear applications, and strategies to enhance radiation resistance. The review concludes that polymer materials play a critical role in advancing piezoelectric composite technologies by addressing environmental and functional challenges, paving the way for future innovations.

Ceramic coatings have many advantages for industrial and medical applications due to their exceptional properties. Ceramic coatings with a thickness of approximately 45 μm, after grinding, were grown using a robotic arm that used the atmospheric plasma spraying procedure. The thermal shock stresses—a common situation in applications but difficult to reproduce under laboratory conditions—of the ceramic layers on top of the metal substrate was achieved using solar energy focused by a concentrating mirror, based on experiments conducted in the CNRS-PROMES laboratory, UPR 8521, belonging to the French National Centre for Scientific Research (CNRS). The ceramic layers showed excellent stability at 1000 °C, even at high heating or cooling rates. At high temperatures (above 1800 °C), the exfoliation of the complex ceramic layer was observed. No differences in the structural, phase, mechanical or adhesion properties of the ceramic layer were observed after the thermal shock cycles (in the literature, there have been quite few reports regarding the properties of the ceramic layers after the thermal shock application). Scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), atomic force microscopy (AFM) and X-ray diffraction (XRD) techniques were used to characterize the complex ceramic coating and the effects of thermal shock cycling. The phases and chemical composition of the complex coatings remained similar, insensitive to thermal shock at 1000 °C, consisting of a mixture of crystalline yttrium zirconium oxide and α and γ alumina. For all cases, the main residual stress state was tensile. After 5 or 10 cycles of thermal shocks, a smoothing of the residual stress state was observed in the investigated area. A higher temperature (above 1800 °C), applied as thermal shock, led to higher residual stresses and resulted in large cracks and the spallation of the coating layer.

Combined analysis methods such as optical microscopy (OM), cathodoluminescence (CL) microscopy, X-ray diffraction (XRD), and scanning electron microscopy–energy dispersive X-ray spectrometry (SEM–EDX) have made it possible to obtain the first physico-chemical data of Dacian potsherds, exhumed at the archeological site of Ocnița-Buridava, Romania; the samples were provided by the “Aurelian Sacerdoțeanu” County Museum Vâlcea, dating from the 2nd century BC to the 1st century AD. The mineralogical and petrographic analyses revealed two types of ceramic pastes, taking into account the granulometry of the inclusions and highlighting the choice of the potter for fabricating the ceramic either by wheel or by hand. All samples showed an abundance in quartz, mica (muscovite and biotite), and feldspars. These observations were confirmed by cathodoluminescence imagery, revealing heterogeneous pastes with varied granulometric distributions. The XRD patterns indicated the presence of the mineral phases, indicating a firing temperature below 900 °C. The wheel-made ceramics have a fine, compact matrix with very fine inclusions (<40 µm). On the other hand, the hand-made ceramics present a coarse matrix, with inclusions whose granulometry reaches approximately 2 mm. The difference between these two types of ceramics is also confirmed by the mineralogical and chemical analysis. The wheel-made potsherds are more abundant in MgO, Al₂O₃, and CaO contents.

This paper presents research on the degradation processes of the fresco painting in the cave church of Corbii de Piatră Hermitage under the influence of meteoric infiltration water and environmental factors. The medieval fresco dates from the end of the 13th century and the beginning of the 14th century, being painted on a sandstone wall. The infiltration of meteoric water through this wall, the temperature variations, the environment and the repeated wetting/drying processes determined the degradation of the fresco, resulting in its detachment from large surfaces. This research established correlations between the processes that take place, the structural transformations, the changes in composition and the adhesion of the fresco to the sandstone wall. The results have been made available to conservation and restoration specialists, in order to choose appropriate materials and technologies. This paper presents findings regarding the pictorial material and introduces new analysis techniques in research on the degradation processes of the fresco painting in the cave church of Corbii de Piatră Hermitage under the influence of meteoric infiltration water and environmental factors.

The Zr-2.5%Nb alloy used to manufacture the pressure tubes for the CANDU 600 power plant experiences continual corrosion when the reactor’s fuel channels are functioning normally. Analysis of the hydrogen accumulation circumstances, the creation of zirconium hydride platelets, evaluation of the platelets’ reorientation in the thermo–mechanical field at volumetric flaws, and determination of the hydrogen morphology are therefore significant goals of the worldwide research being conducted in this field. In this paper, pressure tube alloy samples with artificial V flaws were hydrided by the technique of electrolytic deposition of a hydrogen film layer, followed by a specific thermal treatment. Micrographs of the Zr-2.5%Nb alloy samples in the radial cross-section were taken to examine the hydride reorientation phenomenon that occurred when the samples were heated under mechanical stress. The complex stress field around a tip flaw promoted the formation of some circles from hydride filaments. To characterize the zirconium hydride morphology in the reorientation zone at the volumetric flaw tip, image analysis and processing techniques were applied. To better characterize the reorientation zone from the point of view of embrittlement and mechanical behavior, this paper proposes a novel metric for the morphology of hydrides located in the reorientation zone. This work’s findings are beneficial for the investigation of CANDU fuel channels’ structural integrity.

The Inconel 718 superalloy, a precipitation-hardenable material, is of particular interest for applications involving components operating under extreme conditions due to its excellent mechanical properties, high corrosion resistance at temperatures up to 700 °C, and good workability. At high temperatures, thermal transfer processes are crucial for temperature distribution across the component’s section, structural transformations, and variations in the alloy’s properties. The history of accidental overheating events is critical for the microstructure and properties of the alloy. Studies on thermal transfer in the Inconel 718 alloy available in the literature typically focus on the alloy in its as-delivered state. The experimental research presented in this paper examines the influence of repeated overheating history on the thermal diffusivity of the alloy.