22 January 2021 in Science
Opening charge transport pathways: In perovskite solar cells, the insulating nature of passivation layers needed to boost open-circuit voltage also increases the series resistance of the cell and limits the fill factor. Most improvements in power conversion efficiency have come from higher open-circuit voltage, with most fill factor improvements reported for very small-area cells. Peng et al. used a nanostructured titanium oxide electron transport layer to boost the fill factor of larger-area cells (1 square centimeter) to 0.84 by creating local regions with high conductivity. Science , this issue p. 390
16 April 2025 in Nature Nanotechnology
Tin halide perovskites (THPs) have emerged as promising lead-free candidates for eco-friendly perovskite solar cells, but their photovoltaic performance still lags behind that of lead-based counterparts due to poor thin-film quality. Constructing two-dimensional/three-dimensional (2D/3D) heterostructures can effectively regulate crystallization and suppress defect formation for developing high-quality THP thin films. However, the high aggregation barrier prevents large 2D perovskite colloids from forming stable clusters, making 2D THPs nucleate more slowly than their 3D analogues. Such distinct nucleation kinetics cause undesirable 2D/3D phase segregation that compromises both photovoltaic performance and device durability. Here we introduce small inorganic caesium cations to partially replace bulky organic cations in the electrical double layers of 2D THP colloids, reducing the colloid size to lower their aggregation barrier. The reduced electrostatic repulsion promotes the coagulation of 2D and 3D THP colloids in the precursor solution, synchronizing their nucleation kinetics for the growth of 2D/3D heterostructured THP thin films with a homogeneous microstructure and markedly reduced trap states. Consequently, the caesium-incorporated THP solar cells deliver an excellent power conversion efficiency of 17.13% (certified 16.65%) and exhibit stable operation under continuous one-sun illumination for over 1,500 h in nitrogen without encapsulation. This study offers new insights into the colloidal chemistry and crystallization engineering of mixed-dimensional heterostructures, paving the way for high-performance lead-free perovskite photovoltaics.
2 March 2011 in Physical Review Letters
Swift heavy-ion irradiation of elemental metal nanoparticles (NPs) embedded in amorphous SiO2 induces a spherical to rodlike shape transformation with the direction of NP elongation aligned to that of the incident ion. Large, once-spherical NPs become progressively more rodlike while small NPs below a critical diameter do not elongate but dissolve in the matrix. We examine this shape transformation for ten metals under a common irradiation condition to achieve mechanistic insight into the transformation process. Subtle differences are apparent including the saturation of the elongated NP width at a minimum sustainable, metal-specific value. Elongated NPs of lesser width are unstable and subject to vaporization. Furthermore, we demonstrate the elongation process is governed by the formation of a molten ion-track in amorphous SiO2 such that upon saturation the elongated NP width never exceeds the molten ion-track diameter.
29 May 2018 in Nature Communications
Despite the fact that non-aqueous uranium chemistry is over 60 years old, most polarised-covalent uranium-element multiple bonds involve formal uranium oxidation states IV, V, and VI. The paucity of uranium(III) congeners is because, in common with metal-ligand multiple bonding generally, such linkages involve strongly donating, charge-loaded ligands that bind best to electron-poor metals and inherently promote disproportionation of uranium(III). Here, we report the synthesis of hexauranium-methanediide nanometre-scale rings. Combined experimental and computational studies suggest overall the presence of formal uranium(III) and (IV) ions, though electron delocalisation in this Kramers system cannot be definitively ruled out, and the resulting polarised-covalent U = C bonds are supported by iodide and δ-bonded arene bridges. The arenes provide reservoirs that accommodate charge, thus avoiding inter-electronic repulsion that would destabilise these low oxidation state metal-ligand multiple bonds. Using arenes as electronic buffers could constitute a general synthetic strategy by which to stabilise otherwise inherently unstable metal-ligand linkages.
28 October 2019 in Applied Physics Letters
Epitaxial film quality is critical to the success of high-performance α-Ga2O3 vertical power devices. In this work, the origins of threading dislocation generation and annihilation in thick α-Ga2O3 films heteroepitaxially grown on sapphire by the mist-CVD technique have been examined by means of high-resolution X-ray diffraction and transmission electron microscopies. By increasing the nominal thickness, screw dislocations exhibit an independent characteristic with a low density of about 1.8 × 106 cm−2, while edge dislocations propagating along the c-axis are dominant, which decrease down to 2.1 × 109 cm−2 in density for an 8 μm-thick α-Ga2O3 layer and exhibit an inverse dependence on the thickness. In the framework of the glide analytical model, parallel edge dislocations are generated at the interface due to the misfit-induced strain relaxation, while the dislocation glide and coalescence result in the annihilation and fusion behaviors. The optimal thick α-Ga2O3 with low dislocation densities may provide a prospective alternative to fully realize α-Ga2O3 power devices.
22 May 2020 in Science Advances
Explosive energy conversion materials with extremely rapid response times have broad and growing applications in energy, medical, defense, and mining areas. Research into the underlying mechanisms and the search for new candidate materials in this field are so limited that environment-unfriendly Pb(Zr,Ti)O3 still dominates after half a century. Here, we report the discovery of a previously undiscovered, lead-free (Ag0.935K0.065)NbO3 material, which possesses a record-high energy storage density of 5.401 J/g, enabling a pulse current ~ 22 A within 1.8 microseconds. It also exhibits excellent temperature stability up to 150°C. Various in situ experimental and theoretical investigations reveal the mechanism underlying this explosive energy conversion can be attributed to a pressure-induced octahedral tilt change from a−a−c+ to a−a−c−/a−a−c+, in accordance with an irreversible pressure-driven ferroelectric-antiferroelectric phase transition. This work provides a high performance alternative to Pb(Zr,Ti)O3 and also guidance for the further development of new materials and devices for explosive energy conversion.