22 October 2024 in IEEE Microwave and Wireless Technology Letters
This work presents the design and measurement of a low-power wide-band cryogenic low-noise amplifier (LNA) that operates at both room and cryogenic temperatures using 16 nm FinFET technology. The LNA is packaged and measured at both room and cryogenic temperatures. It features a compact multistage cascode topology and operates between 2.2 and 6.9 GHz, with a noise figure (NF) of 0.36 dB, a peak gain of 31.4 dB, and a total dc power consumption of 4 mW at 18 K temperature.
12 July 2023 in RSC Advances
We present a method for assessing the spreading resistance of electrodes immersed in a lossy medium, useful for the calibration of scanning microwave microscopy and also in other fields such as fluidic sensors.
4 July 2023 in IEEE Microwave and Wireless Technology Letters
This letter presents a mm-wave wideband amplifier implemented in a 130-nm SiGe BiCMOS technology operating up to 100 GHz. For the wideband operation, a new wideband technique based on low-impedance coupled line structure was proposed and adopted to the amplifier in combination with other bandwidth extension techniques. The enhancement of the amplifier bandwidth with the low-impedance coupled lines employed at the input and output matching networks is introduced in detail along with methodologies for actual implementation. The fabricated amplifier showed a peak gain of 13.2 dB with a 3-dB bandwidth of 90 GHz, covering from 10 to 100 GHz. The power consumption of the amplifier is 117 mW. The chip size is 865 $\times$ 344 $\mu$ m $^{2}$ excluding probing pads.
14 October 2025 in IEEE Journal of Microwaves
This work presents temperature-compensated cryogenic complementary metal-oxide-semiconductor (CMOS) modulators operating over a 10 K to 300 K temperature range, suitable for intra- and inter-thermal cryogenic communications. Conventional metal-based coax cables suffer from a fundamental trade-off between thermal load and frequency-dependent attenuation, where lower thermal load results in higher electromagnetic attenuation. The recent surge in cryogenic high-performance computing and quantum computing has driven the demand for scalable cryogenic interconnect solutions. New techniques in optical fibers and millimeter-wave backscatter transceivers have demonstrated the ability to transport digital data between thermally isolated temperatures without the need for coaxial cables. Our new modulator can integrate (at the package or chip level) with millimeter-wave transmitters co-located on the same thermal condition while supporting bandwidth-efficient modulations such as multi-level pulse amplitude modulations. Based on this motivation, we implemented a current-steering 2-bit modulator in a 65-nanometer (nm) bulk CMOS process. The modulator achieves a data rate of 13 gigabits per second (Gb/s) while consuming 15.4 mW under a 1.2 V supply at 10 K, resulting in an energy efficiency of 1.18 picojoules per bit (pJ/b). In addition to previously demonstrated optical fibers and millimeter-wave backscatter, we implemented a 150 GHz (GHz) transmitter utilizing the same current-steering modulator scheme in a 28-nm CMOS process. We established contactless connections between thermally isolated systems operating at 10 K and 300 K, achieving a data rate of 8 Gb/s.
4 November 2025 in IEEE Transactions on Microwave Theory and Techniques
This article presents a method for locating a wireless signal source using signal strength measurements taken along the border of a $256\times 256$ -m2 area. This method leverages a deep residual neural network (ResNet) to predict the location of the transmitter within the area of interest. This approach reduces data collection and computational overhead associated with traditional localization methods. The method is validated through simulated data as well as measurements at 2.7 GHz, with an average error of 7.23 m and a standard deviation of 3.32 m. This work addresses the need for scalable and low-cost transmitter localization methods, particularly in environments where conventional approaches are hindered by obstacles or require extensive data collection.
9 December 2025 in IEEE Transactions on Microwave Theory and Techniques
Optically reconfigurable beam steering at millimeter-wave (mm-wave) frequencies requires engineered semiconductor surfaces with high-power optical sources. This article presents the first demonstration of beam steering using a commercially available monocrystalline silicon solar cell, directly exploiting its intrinsic photovoltaic properties for electromagnetic wave modulation. Dynamically reconfigurable Fresnel zone plate (FZP) patterns are projected onto the solar cell with low-power visible light (0.043 W/cm2), enabling reconfigurable beam steering across the Ka-band (26.4–40 GHz). The solar cell’s back-contact design preserves RF transparency while providing polarization isolation up to −25 dB, and measurements show 10-dB modulation depth under illumination. Simulations and experiments confirm diffraction-based steering of a 30-GHz source. Furthermore, a 5G new radio (NR) data-link experiment at 28.03 GHz using 256-QAM modulation demonstrates the system’s capability to sustain high-rate communication links. This fabrication-free and accessible approach establishes a practical path toward reconfigurable mm-wave beam steering and adaptive RF devices.