1 February 2008 in 2008 IEEE 14th International Symposium on High Performance Computer Architecture
In this paper, we explore the use of multi-band radio frequency interconnect (or RF-I) with signal propagation at the speed of light to provide shortcuts in a many core network-on-chip (NoC) mesh topology. We investigate the costs associated with this technology, and examine the latency and bandwidth benefits that it can provide. Assuming a 400 mm2 die, we demonstrate that in exchange for 0.13% of area overhead on the active layer, RF-I can provide an average 13% (max 18%) boost in application performance, corresponding to an average 22% (max 24%) reduction in packet latency. We observe that RF access points may become traffic bottlenecks when many packets try to use the RF at once, and conclude by proposing strategies that adapt RF-I utilization at runtime to actively combat this congestion.
9 January 2014 in Journal of Infrared, Millimeter, and Terahertz Waves
14 February 2013 in IEEE Transactions on Terahertz Science and Technology
This paper presents a transmitter operating in the 210-227 GHz in 90 nm CMOS, based on a Colpitts VCO. The third harmonic of the generated VCO fundamental signal is coupled to an on-chip dipole antenna. A simplified model is presented for the operation and the design of the circuit, which compares well with simulated and measured results. The transmitter achieves an EIRP of +1.8 dBm at 217 GHz and directivity of about +10 dBi. The circuit consumes 128 mW of DC power and an area of 0.53 mm2.
3 April 2013 in IEEE Transactions on Microwave Theory and Techniques
Third-harmonic current generation in a CMOS transistor is modeled and analyzed including the effects of large-signal clipping and high-frequency roll-off for the application of millimeter-wave (mm-wave) frequency multipliers. Using the model and introducing harmonic rejection techniques, a wideband 8.5-dBm output-power x9 frequency multiplier from X -band to W -band implemented using a 65-nm CMOS process is designed and characterized. Six transformer coupled differential stages are used, two tripler stages, a Ka -band amplifier, and a three-stage W -band power amplifier (PA). The circuit reaches a saturated output power of 8.5 dBm at 91.8 GHz with a 12.2% bandwidth from 88 to 99.5 GHz. Excellent suppression of unwanted harmonics is achieved with better than 31 dBc across all bandwidth. The core design occupies only 390 μm × 675 μm and consumes 438 mW from a 1.2-/2.4-V supply.