21 July 2023 in IEEE Access
Inertia emulation is claimed to play a decisive role in the regulation and management of frequency in modern electrical systems. The support offered by renewable energy power plants and distributed generators is key to diminish the rate of change of frequency (RoCoF), as many synchronous generators are being replaced all around the globe. It is a reality that the implementation of the swing equation in the power converter control has been the core of several proposals on grid-forming controllers to emulate inertia. This kind of controller has been heavily studied and integrated in some demonstrators around the world during the last years, providing dynamic inertia support functionalities. However, the need to modify the synchronization strategy in already deployed power units has been one of the key opposition factors on industry, leading to a severe shortcoming on the integration. In contrast to the traditional swing equation implementation this paper presents a lightweight inertial phase-locked loop (IPLL) able to take the most of inertial features introducing minor changes on classical power converter control and synchronization structures. As shown in this work, the straightforward implementation significantly reduces the technological and computational effort compared to other synchronous emulation proposals. Moreover, it integrates not only dynamic inertial response to the converter, but also all grid-forming capacities to the power conversion unit. This modification on the synchronization structure enables the converter to work in grid-following mode in grid-tied applications, and grid-forming in islanded ones. The integration of the proposed IPLL, the stability analysis and a sample of its performance in HIL and experimental environments will be presented in this paper.
22 July 2024 in IEEE Access
In power quality applications, the long-term reliability, low maintenance cost, and low volume and weight of a STATCOM converter are of the paramount importance. The use of the series multi-level power converter topology can significantly improve both volumetric and gravimetric density as well as power conversion efficiency of the STATCOM converter. This paper presents a solution that utilizes the Novel 5 Level E Type topology for the 3-phase, 4-wire STATCOM power quality applications. A comprehensive theoretical analysis and step-by-step design process are presented and discussed in the paper. A proof of the concept prototype (12kVA $3\times 400.230$ V) has been designed, manufactured, and intensively tested and experimentally verified. The experimental results are discussed in detail and compared with state-of-the-art solutions from both academic and industrial sectors. The achieved improvements in volumetric and gravimetric density, along with ultra-high power conversion efficiency and reduced cooling effort, justifies significant benefits of the proposed topology and approach.
18 July 2024 in IEEE Access
This paper introduces the concept of an active DC. The active DC bus consists of a reduced passive DC bus and an Active Resonant Voltage Balancer (ARVB). The ARVB, operating as a series resonant converter, reduces the DC bus current ripple by injecting balancing current into the DC bus mid-point. This injected current effectively counteracts the fundamental component of the current flowing to the mid-point of the DC bus, resulting in a significant reduction in both the gravimetric and volumetric volume of the DC bus. The proposed concept is thoroughly analyzed through a case study involving a single-phase half-bridge rectifier application. Through theoretical analysis and experimental validation, the usefulness and feasibility of the proposed concept are demonstrated, showing in the presented case study a reduction of the DC bus volume by a factor of 4 at the expense of an increase in losses. The concept represents a viable option in power conversation applications where volume and weight reduction and optimization are required.